Numerical study on PEMFC’s geometrical parameters under different humidifying conditions

Steady-state and three-dimensional simulations were carried out to study the influences of geometrical parameters on the performance of PEMFC under different hydrating conditions. Flow fields, species transport, transport of water in polymer membrane and movement of liquid water in cathode and anode porous layers were determined, in order to accomplish a complete estimation of ohmic and concentration losses of PEMFC power. The geometrical parameters were thickness of the polymer membrane, cathode catalyst layer as well as gas channel to rib width ratio. Every simulation was made under different relative humidities of inlet flows (50 and 100%) for every change of characteristic length. Results show that the influence of the geometrical parameters on ohmic and concentration losses is of considerable importance. The performance of PEMFC is seriously affected under dehydrating conditions. However, such performance may be considerably improved by using suitable geometrical parameters. Cathode and anode liquid saturation may not only affect the transport of species, but also the polymer electrolyte water content. These results show the importance of simultaneously calculating both the water absorption and desorption through the polymer electrolyte and the liquid saturation in the cathode and anode porous mediums to obtain an actual view of ohmic and concentration losses of the PEMFC performance.     

具多件内装物的瓦楞纸箱尺寸优化设计

跳出传统的设计思路，提出装多件内装物的瓦楞纸箱尺寸优化设计方法，建立优化设计模型，编写程序用于生产，节省纸用量，降低成本。     

Optimal synthesis of tunable elastic wave-guides

Topology optimization, or control in the coefficients of partial differential equations, has been successfully utilized for designing wave-guides with precisely tailored functionalities. For many applications it would be desirable to have the possibility of drastically altering the wave-guiding properties of a device “on the fly,” in a controllable manner as an influence of some external input. This would enable wave-guides with highly non-linear input-output mappings, such as for example controllable wave switches.In this paper, we propose using finite elastic pre-straining for the purpose of tuning a wave-guide. In order to systematically formulate and solve the wave-guide synthesis problems we utilize mathematical programming methods in conjunction with topology optimization for parametrizing the design space. The resulting extremal problem is, from a practical point, equivalent to finding an optimal subdivision of a given control volume into two disjoint subsets occupied by two different materials, normally resulting in a highly heterogeneous elastic body with desired wave-guiding functionalities in the original and finitely deformed configurations.The proposed methodology is illustrated with numerical examples.     

高坝洲电站碾压混凝土纵向围堰拆除爆破设计与实践

介绍了高坝洲电站碾压混凝土下游纵向围堰现场爆破试验成果,在分析爆破试验效果的基础上进行碾压混凝土围堰拆除爆破设计,详细分析了拆除爆破实施效果及主要影响因素.     

Identification and modelling of aerobic hydrolysis – application of optimal experimental design

Hydrolysis mechanism plays a dominant role in the delicate balance of electron donor/electron acceptor ratios in BNR and EBPR systems as an important carbon source. In this study, the surface‐saturation‐type hydrolysis kinetics was investigated based on respirometric measurements, within the context of the theoretical and the practical identifiability of mathematical models. The identifiable parameters of a selected model were derived from respirograms. In addition, the information from the experiments was evaluated on the basis of Optimal Experimental Design (OED) methodology for different initial conditions of the batch respirometric experiment. © 2003 Society of Chemical Industry     

彩色多频同步显示器行激励级电路的倒推设计法（1）

行激励级电路的设计是完全为行输出级服务的,它实质上是行输出级电路设计的一个重要而不可分割的组成部分。因此行激励级电路的设计,自然采用了从显象管偏转线圈和行输出管到激励变压器和行激励级的倒推设计法。     

Non-steady-state model for kinetics of free radical polymerization, 4. Direct thermal initiation

This paper deals with the non-steady-state kinetics of direct thermal initiated polymerization. The initiation is assumed to be a bimolecular reaction of the monomer. The relationship between the radical concentration and the monomer conversion is rigorously derived. In further treatment a few very close approximations are introduced based on the fact that the number of monomer molecules reacting in the initiation step is much less than that consumed in the propagation step for a process producing high polymer, and the value of the rate constant for propagation or chain transfer is much lower than that for chain termination. Expressions for various molecular parameters, such as molecular weight distribution, number-average and weight-average degrees of polymerization, and dispersity, are given. Several numerical examples are provided.     

旋波媒质基本参数的一种测试方法

本文提出了直接利用旋波材料板的Ｓ参数获得其基本参数的方法。通过自由空间测量旋波材料板的反射场和透射场，可以反演得到媒质的复介电常数、复磁导率、旋波量以及透射场的轴比和旋转角，测试程序简单，结果精度高。     

层状催化剂颗粒的优化设计——双组分等温平行反应体系

针对双组分等温平行反应体系,分析讨论了以提高催化剂活性和选择性为目标时催化剂活性组分的最优分布形式(为δ-函数分布),并给出了确定这种反应体系的催化剂的最佳活性层位置的计算方法。结果表明:以提高选择性为目标的最佳活性层位置比以提高活性为目标的要更靠近催化剂核心,实用的最优位置应介于二者之间。最后,本文还研究了反应动力学级数、本性选择性以及内扩散模数(Thiele 模数)等因素对最佳活性层位置的影响。