地下盐穴储气库盐岩热损伤机理

基于变质量热力学原理，建立盐穴储气库注采过程中的工程热力学分析数学模型，给出了单个注气和采气过程中温度和压力随时间变化的解析解，作为数值模拟的边界条件。根据金坛储气库的基本数据和盐岩实验研究参数，利用COMSOL Multiphysics有限元软件建立单腔盐穴注采过程的温度-应力耦合模型，模拟恒定注采速率下盐腔围岩的拉伸损伤、剪切损伤和膨胀损伤分布情况，研究夹层和热应力对围岩损伤的影响。基于热应力理论，结合模拟结果分析盐穴储气库注、采气过程中围岩的热损伤机理。模拟结果表明：在热应力存在的情况下，夹层的存在促进了围岩损伤的产生，无夹层时围岩无损伤发生，有夹层时围岩存在损伤；注气过程和采气过程的损伤发生位置存在差别：注气过程损伤多发生在夹层附近的盐岩中，采气过程损伤多发生在夹层中；膨胀损伤的范围最广，且损伤范围覆盖了前2种损伤，因此实际生产过程中推荐使用膨胀损伤判据，损伤评价结果更为保守。     

Structural Approaches to Control Interlayer Interactions in 2D Covalent Organic Frameworks

The ability to design and synthesize monomers can affect fundamental aspects in 2D covalent organic frameworks, such as dimensionality, topology, and pore size. Besides this, the structure of the monomers can also affect interlayer interactions, which provide an additional means to influence crystallinity, layer arrangement, interlayer distances, and exfoliability. Herein, some of the effects that the structure of monomers can have on the interlayer interactions in 2D covalent organic frameworks and related materials are illustrated.     

Effect of PEI cathode interlayer on work function and interface resistance of ITO electrode in the inverted polymer solar cells

In this paper, we investigated the effect of PEI cathode interlayer on the work function and the interface resistance of ITO electrode in the inverted polymer solar cells (PSCs) based on PBDTTT-C-T:PC₇₀BM. It is found that a very thin layer of PEI (⩽5.5 nm), either linear PEI (l-PEI) or branched PEI (b-PEI) with different molecular weights, is enough to lower the work function of the ITO electrode and to enhance the photovoltaic performance of the devices. The champion power conversion efficiency (PCE) of the devices with the PEI cathode interlayer is 7.84%, more than doubled of that without the interlayer. However, a thicker PEI interlayer (⩾10 nm) results in abrupt decrease of the PCEs due to the increase of the resistance. Interestingly, for the thicker interlayers, the l-PEI shows high photovoltaic performance than that of b-PEI, which can also be explained by their difference in the resistances. This work supplies an insight into the function of PEI cathode interlayer on improving the work function and resistance of ITO electrode in the inverted PSCs, and provides some instructions on the future design of interlayer materials in PSCs.     

Improved performance of inverted polymer solar cells by utilizing alcohol-soluble oligofluorenes as efficient cathode interlayers

Two star-shaped oligofluorenes with hexakis(fluoren-2-yl)benzene as core are designed and synthesized, namely Tn0 and Tn1. Diethylamino groups are attached to the side chain of fluorene units of Tn0 and Tn1 and enable them alcohol solubility, additional hydrophobic nhexyl chains are grafted on the π-extended fluorene arms of Tn1. Power conversion efficiency (PCE) as high as 8.62% and 8.80% are achieved when utilizing Tn0 and Tn1 as cathode interlayers in inverted polymer solar cells, respectively. The work function of ITO effectively decreased by introducing interlayer, resulting in high Voc of the device, besides, the wetting properties of the interlayers can be tuned by modifying the oligofluorenes with π-extended structure, and the more hydrophobic interlayer will benefit the device performance with enhanced Jsc and FF.     

Fabrication and thermo stability of the SnO2/Ag/SnO2 tri-layer transparent conductor deposited by magnetic sputtering

Using the magnetic sputtering technique, the SnO₂/Ag/SnO₂ tri-layer transparent films were fabricated on float glasses successfully. Compared with the commercial FTO (F-doped SnO₂) film, the SnO₂/Ag/SnO₂ tri-layer films have higher visible-light transmittance and better conductivity. The total thickness of the SnO₂/Ag/SnO₂ films is one third of the commercial FTO film leading to the high visible-light transmittance. The high carrier concentration of the SnO₂/Ag/SnO₂ films contributes to the tri-layer films’ low resistivity. In addition, to further improve the performance of the SnO₂/Ag/SnO₂ tri-layer films, samples were annealed under different temperatures. The results illustrate that the lowest sheet resistance (5.92 Ω/sq) and the highest visible-light transmittance (87.0%) were obtained after annealing at 200 °C. Furthermore, the thermal stability of the films could be enhanced by a multi-step annealing process due to the recrystallization effect.     

Joining of dense Si3N4 ceramics with tape cast Lu-Al-Si-O-N interlayer

Lu-Al-Si-O-N tapes with different thickness were used to join gas pressure sintered Si₃N₄ ceramics. The microstructure of the joints and the influences of the joint thickness and joining temperature on the bonding strength of the as-joined Si₃N₄ ceramics have been investigated. The highest bonding strength about ~ 300 MPa of the joined specimens was achieved by using 450 µm interlayer at 1450 °C. The existence of Si₃N₄ nanowires was beneficial for the improvement of the bonding strength by interweaving the oxynitride glass matrix in the joint region.     

Effects of SiNx interlayer on characterisation of amorphous diamond-like carbon films

The magnetron sputtering amorphous diamond-like carbon film is successfully deposited by SiN_x interlayer approach. The scanning electron microscopy study reveals the creation of high uniform surface micrograph diamond-like carbon films with SiN_x interlayer. For comparison, diamond-like carbon films with different interlayers are also grown. The Raman spectra are analyzed in order to characterize the stressed induce peak shifts of the films. The interactions of C atom with Si(100) and SiN_x surface are studied by density functional theory simulation. The effects of interlayers on the films deposition and the considering deposition mechanism are discussed. It is suggested that the diamond-like carbon and SiN_x bilayer structure can help to render applications in protective coatings and high quality silicon on diamond related radiation tolerance devices.     

Diffusion bonding of TiAl based alloy to Ti–6Al–4V alloy using amorphous interlayer

Powder metallurgical TiAl based alloy and Ti–6Al–4V (TC4) alloy were diffusion bonded at 915 °C for 1 h under a pressure of 80 MPa. Single Ti‐based amorphous or Ni‐based amorphous foil was utilized as an interlayer during diffusion bonding process. The tensile mechanical properties of the diffusion bonded joints between TiAl based alloy and TC4 alloy were tested. The fracture surface and microstructure characteristic of these joints were also observed carefully by scanning electron microscope. The TiAl based alloy with a fully lamellar microstructure is more suitable for diffusion bonding to TC4 alloy. Adding a Ti‐based amorphous interlayer is more conducive to the element diffusion, giving rise to the improvement in the mechanical properties of the diffusion bonded joints. Results also show that the diffusion bonded joints form a metallurgical bond and fracture in a brittle manner.     

Fabrication and characterization of in-situ duplex plasma-treated nanocrystalline Ti/AlTiN coatings

Plasma nitriding and plasma-assisted PVD duplex treatment was adopted to improve the load-bearing capacity, fatigue resistance and adhesion of the AlTiN coating. Ion etch-cleaning was applied for better adhesion before plasma nitriding. After plasma nitriding Ti interlayer was in-situ deposited by high power impulse magnetron sputtering (HIPIMS), followed by the AlTiN coating through in-situ deposition by advanced plasma-assisted arc (APA-Arc). The microstructure and properties of the duplex-treated coating were carefully characterized and analyzed. The results show that the thicknesses of the nitriding zone, the γ′-Fe₄N compound layer, the Ti interlayer and the AlTiN top layer with nanocrystalline microstructures are about 60 μm, 2–3 μm, 100 nm and 6.1 μm, respectively. The nitriding rate is about 30 μm/h and the AlTiN coating deposition rate reaches 6.1 μm/h. The interfacial adhesion of the Ti/AlTiN coating is well enhanced by ion etch-cleaning and a Ti interlayer, and the load-bearing capacity is also improved by duplex treatment. In addition, the instinct hardness of the Ti/AlTiN coating reaches 3368HV_0.05 while the wear rate coefficient of 5.394×10⁻⁸ mm⁻³/Nm is sufficiently low. The Ti/AlTiN coating, which possesses a high corrosion potential (E_corr=−104.6 mV) and a low corrosion current density (i_corr=4.769 μA/cm²), shows highly protective efficiency to the substrate.