不同基质配比对银毛野牡丹扦插的影响

银毛野牡丹是优良的园林观赏性植物,但是繁殖有性结实率低。通过为期30天的扦插试验,对比不同基质（原土、草炭土、蛭石、珍珠岩）配比对银毛野牡丹插穗生长的影响,分析插穗生根时间、生根数目、最长根长、生根率、生长状态以及基质变化,找出适合其生长发育的优良基质,为银毛野牡丹的繁殖提供技术支撑。研究表明：试验组T8（原土：细沙：草炭土：蛭石：珍珠岩=1：1：2：1：1）的插穗生根率、最长根长、插穗长势为最佳,试验组T2（草炭土）效果次之,在条件有限的情况下可以作为备用方案以供生产所需。     

块体金属基纳米复合材料的制备技术

金属基纳米复合材料（MMNCs）兼有高的强度和良好的韧性，是金属基复合材料（MMCs）的一个重要发展方向。但是，无论是采用液相铸造法还是固相烧结法，欲制备纳米颗粒增强的块体金属基复合材料均相对困难。综述了国内外制备块体金属基纳米复合材料的工艺原理、结构特征和主要性能，并展望了其发展和应用前景。     

用颗粒冲击磨损试验评价热喷涂陶瓷涂层的粒子间结合

热喷涂层中扁平粒子间的结合决定涂层的性能。能评价粒子间结合的简单可靠的方法对于涂层的实际应用具有十分重要的意义。然而采用传统的试验方法如拉伸试验难以获得令人满意的结果。可以预料具有去结合机理的一层接一层去除粒子的试验方法将是有效的。实验证明通过控制测试条件，颗粒冲击磨损试验能够通过去结合机理有效地使涂层产生磨损。本论文提出了陶瓷涂层颗粒冲击磨损的模型，基于涂层受颗粒冲击磨损是因一层层的粒子通过去结合而产生的机理，建立了磨损速度与粒子间结合率的关系。定义为ACT－JP值（磨损速度的倒数）的特征值与粒子间结合率的实验相关性证明了粒子间结合对陶瓷涂层磨损的控制作用和利用颗粒冲击磨损试验评价粒子间结合的可行性。     

萃取预分离法分离富铕中钇矿新工艺

采用一种新的串级萃取方式--萃取预分离法分离富铕中钇矿的新工艺.原料首先流入十几的三出口预先粗分离工艺,其萃余液La～Gd(TbDy)直接流入Nd/Sm工艺;中间出口流入(Gd)Tb～HoY(Er)Gd～Dy/Ho～LuY细分离工艺;出口负载有机相(Ho)Er～LuY流入Gd～Dy/Ho～LuY的洗涤段.结果表明,新工艺的粗分离工艺将占原料约70%的La～Gd(TbDy)预分离掉,使流入Gd～Dy/Ho～LuY工艺的稀土量减少约70%;由于Gd～Dy/Ho～LuY分组的萃余液GdTbDy含Ho2O3小于0.03%,省去原工艺的GdTbDy/HoY分离;新工艺的处理能力提高30%,酸碱消耗减少20%以上,贵重稀土元素Eu和Tb的存槽量大大减少.     

CoCrPtNb／CrTi／C多层膜记录介质的制备和性能研究

采用CoCrPtNb四元合金作磁记录介质，并采用多层膜结构（CoCrPt）100-Nbx/CrTi／C／Glass制备玻璃盘基硬盘。实验结果表明：采用适宜厚度的籽晶层与合适组分的底层和磁性层的多层膜结构，即使在室温下溅射，此种薄膜磁记录介质也可得到高达260kA／m的矫顽力；在550℃高温下，经过30min真空退火后，其矫顽力有较大幅度提高，并在Nb含量为2．4％（原子分数）时达到极大值386kA／m，适用于高密度磁记录。同时，也详细分析了磁性层和底层组分、籽晶层厚度以及真空退火对磁记录介质磁性能和微结构的影响。     

Measurements of granular flows in two-dimensional hoppers by particle image velocimetry. Part I: experimental method and results

The objective of the present investigation was to test the applicability of particle image velocimetry (PIV), which is normally used for measuring velocities in liquids or gases, to measurement of velocities in granular flow. A second objective was to use PIV to provide experimental data for comparison with mathematical models. The flow of zinc particles, of size 0.4, 0.61 and 0.76 mm size, in a flat-bottomed two-dimensional hopper was measured by PIV. The particles were characterized using ASTM procedures for angle of repose, packing density and flow rate through a funnel. Through PIV, velocities and mass flow rates were determined for exit apertures 5 and 7.5 mm in width and 10, 30 and 50 mm long. The bed of particles in the hopper showed the expected stagnant zones on either side of the aperture. There was a continual avalanche of particles at the “V’’ which forms at the surface of the bed and some images of this avalanche, obtained with a boroscope, are included.     

Characterisation of mortar morphology in thin sections by digital image processing

A digital imaging approach was applied to investigate mortar morphology in thin sections; in particular, the binder/aggregate ratio and the grading curve of five mortar bars were attained by digital image processing (DIP), using the Image Pro Plus 4.1 software package. The imaging procedure employed image segmentation, to extract mortar aggregate, and image filtering, to fix grain boundaries. The results show that digital image processing may be considered as an alternative method to mechanical sieving for the characterisation of mortar morphology, as it appears to be quicker and more accurate than the traditional method. However, digital image processing exhibits limits, which are discussed in the text.     

PKA国家参考品的制备

本文应用 PKA 微量滴定板方法,用 WHO1984年建立的 PKA 国际标准品进行标定,制备了我国第一批 PKA 国家参考品。     

变压吸附富氧工艺用于合成氨制气过程的技术经济分析

本文介绍了变压吸附法制备富氧空气用于合成氨造气系统的新工艺，并对５００００ｔ／ａ合成氨厂进行了技术经济评估。结果表明，同间歇法气化相比，该技术工艺先进且具有显著的经济效益。     

Modeling adsorption and order formation by colloidal particles on a solid surface: A Brownian dynamics study

A three-dimensional simulation model for colloidal dispersion system with an adsorptive surface under a specified bulk concentration was developed basing on the Brownian dynamics technique, and the adsorption process of electrostatically stabilized colloidal particles with radius of 50 nm onto a planar surface with counter charge was simulated. The particle-particle and particle-surface interactions were modeled on the DLVO theory. The adsorbed particles are found to form hexagonally ordered array, only if the surface coverage is above a certain threshold, which varies depending on the ionic strength or the interaction potentials. Through the analysis of the ordered structure, we found that the determinant factor for the order formation is “one-directional average force” acting between adsorbed particles, which exhibits a common value regardless of the ionic strength. Also, looking at the last process for establishing the order, we developed a model that can predict the potential barrier for the order formation. Further, the order formation was proven to be a stochastic phenomenon, and a model to describe the probability against time was developed and its quantitative validity was demonstrated.