彩色半柔性混合料路用性能研究

彩色半柔性混合料是一种在开级配沥青混合料中填充水泥胶浆而形成的兼具沥青路面与水泥混凝土路面优点的彩色复合路面。利用车辙试验来评价彩色半柔性混合料的高温稳定性,用残留稳定度和冻融劈裂试验评价半柔性混合料的水稳定性。结果表明,半柔性混合料具有优良的高温稳定性和疲劳性能,水稳定性较好。     

周宁水电站安全性评价工作

安全性评价是一种现代化的管理手段。开展安全性评价可以提高水电站的安全生产管理水平和设备安全稳定运行水平。结合工作实践,介绍了周宁水电站安全性评价工作的实施过程、主要措施和取得的初步成效。     

Robustness issues in optimal control of unstable plants

This paper presents a robustness analysis of the optimal solution of the step tracking problem in a one-degree of freedom control architecture, for the discrete-time multivariable (MIMO) case. It is shown that the resulting closed loop becomes arbitrarily fragile, i.e. the sensitivity peak becomes arbitrarily large, for certain reference directions. The cause of this problem is that the optimal controller depends on the reference direction. The paper shows that this dependence can be eliminated with an alternative formulation of the optimal problem where the cost is averaged over all reference directions.     

特低渗透油气藏成岩储集相的定量评价方法

针对陕北斜坡东部特低渗透储层受沉积作用和成岩作用两大因素控制的特点，利用灰色系统理论对成岩储集相进行了研究。分析了成岩作用综合效应及其相应的视压实率、视肢结率、视微孔率、成岩综合系数等定量指标和岩心分析数据，建立了成岩储集相综合评价参数、指标和分析方法。通过在安塞油田低孔隙度特低渗透长6。油藏储层的实际应用，对目的层段开展了Ⅰ，Ⅱ，Ⅲ和Ⅳ类成岩储集相的定量评价和油气富集描述，有机地集成和综合了多种信息，实现了成岩储集相对沉积学、岩石学和成岩作用等特征的综合表征，并划分出有利成岩储集相区域，为指导油田有利含油区块的筛选和开发决策提供了重要依据。     

微量稀土元素在铸钢中的应用

综述了近几年稀土在铸钢中的应用研究现状 ,分析了稀土在铸钢中的作用机理及对铸钢性能的影响 ,指出了铸钢中加入稀土的原则 ,提出了今后的研究方向     

The Challenge of the Market

Identifying markets for new or improved products for minor crops threatened with extinction is one critical component of any strategy intended to enhance prospects for sustainable production and use. Typically, however, activities linked to the sustainability of these commodities avoid addressing questions associated with assessing their commercial potential. After a brief review of this avoidance syndrome, this article presents a sample of practical, low-cost procedures to help evaluate the market prospects and procedures for crops like quinoa, while citing references to other methodological materials covering similar topics.     

Survey of switching techniques in high-speed networks and their performance

One of the most promising approaches for high speed networks for integrated service applications is fast packet switching, or ATM (asynchronous transfer mode). ATM can be characterized by very high speed transmission links and simple, hard-wired protocols within a network. To match the transmission speed of the network links, and to minimize the overhead due to the processing of network protocols, the switching of cells is done in hardware switching fabrics in ATM networks. A number of designs have been proposed for implementing ATM switches. Although many differences exist among the proposals, the vast majority of them are based on self-routeing multistage interconnection networks. This is because of the desirable features of multi-stage interconnection networks such as self-routeing capability and suitability for VLSI implementation. Existing ATM switch architectures can be classified into two major classes: blocking switches, where blockings of cells may occur within a switch when more than one cell contends for the same internal link, and non-blocking switches, where no internal blocking occurs. A large number of techniques have also been proposed to improve the performance of blocking and non-blocking switches. In this paper, we present an extensive survey of the existing proposals for ATM switch architectures, focusing on their performance issues.     

Probabilistic analysis of uncertainties in seismic hazard assessment

Sources and current methods of analysis of uncertainty from randomness, fuzziness and ignorance or incomplete knowledge in seismic hazard assessment problem are briefly discussed at beginning; understandings of the authors are then presented in the following order. All three types of uncertainty come from incomplete knowledge. Probabilistic method can be applied to all of them, objective probability for random factors and subjective probability for the other two types of uncertain factors. Discrete subjective probability mass functions for incomplete and fuzzy factors can be obtained from logic-tree and membership functions respectively. Fractile curves may be used to show the scattering of any uncertainty factor, but a unified probabilistic treatment may be applied to any combination of all three types of uncertainty.     

An integrated modelling environment for the embodiment of mechanical systems

The efficient, economical and often elegant transformation from a design schema to an embodied design solution containing real components is essential for the commercial success of a product. More often the ability of the designer to explore an optimum solution is severely frustrated by the analytically intensive and time-consuming aspects of embodying a concept. This paper presents a computer based system-modelling tool that is to be used by designers during the transformation of a concept to an embodied solution particularly to deal with standard components. This environment provides for the representation of conceptual schemas and subsequent embodiment from computer based component selection modules. These selection modules encompass the full range of electronic representations for standard mechanical components. The strategy for representing a mechanical system, its included components and their associated representations is discussed. The process of constructing a system model, specifying the desired performance characteristics and system resolution are also described.