Effect of Bimodal Grain Size Distribution on the Strain Hardening Behavior of a Medium-Entropy Alloy

The evolution of strain hardening behavior of the Fe_(50)(CoCrMnNi)_(50) medium-entropy alloy as a function of the fraction of recrystallized microstructure and the grain size was studied using the Hollomon and Ludwigson equations.The specimens under study were partially recrystallized,fully recrystallized with ultrafine-grained microstructure,and fully recrystallized with coarse grains.The yield strength decreases steadily as the fraction of recry stallized micro structure and grain size increases due to the recovery process and the Hall-Petch effect.Interestingly,the bimodal grain distribution was found to have a significant impact on strain hardening during plastic deformation.For instance,the highest ultimate tensile strength was exhibited by a 0.97 μm specimen,which was observed to contain a bimodal grain distribution.Furthermore,using the Ludwigson equation,the effect of the bimodal grain distribution was established from the behavior of K_2 and n1 curves.These curves tend to show very high values in the specimens with a bimodal grain distribution compared to those that show a homogenous grain distribution.Additionally,the bimodal grain distribution contributes to the extensive L(u|")ders strain observed in the 0.97 μm specimen,which induces a significant deviation of the Hollomon equation at lower strains.     

基于绿色制造的金属塑性精成形

金属塑性成形加工在产品制造过程中具有举足轻重的地位。但传统的加工方法存在以下不足：材料利用率很低;能源浪费严重;振动、噪声对操作工人以及周边环境产生严重危害和污染。本文综合分析了传统金属塑性成形加工在资源、能源及环境等方面存在的普遍症结,提出了节约资源、能源、环境保护,确保可持续发展是金属塑性成形理论与技术发展的重大课题。实现绿色塑性成形加工,应从技术、工艺和设备三方面入手,走金属塑性精成形之路。     

竹炭的改性及对PP废塑料性能影响的研究

首先用硅烷偶联剂γ-氨丙基三乙氧基硅烷(KH550)处理竹炭(BC)得到K-BC,再通过熔融共混制备了一系列的K-BC/聚丙烯废洗衣机料(X-PP)复合材料,通过扫描电子显微镜(SEM)表征了BC的形貌,分析了K-BC含量对复合材料物理性能、尺寸稳定性、热变形温度(HDT)及维卡软化温度(VST)的影响.结果发现,BC...     

免充气塑料轮胎支撑结构对性能的影响

免充气塑料轮胎的支撑结构对轮胎性能有直接影响。本研究提出了一种具有连续支撑结构的免充气轮胎,利用ABAQUS软件,与两种现有免充气轮胎进行应力大小、接地性能以及刚度性能的对比。结果表明:连续支撑结构可改善免充气轮胎的应力,接地压力的分布均匀性;同时,连续支撑结构轮胎的纵向刚度、横向刚度均远好于同规格现有免充气轮胎和子午线轮胎;扭转刚度性能接近同规格子午线轮胎。通过分析可知,连续支撑结构轮胎在复杂工况路面有显著的优势,具有良好的发展前景。     

塑料薄膜材料在微藻培养环境中的稳定性和生物附着行为

考察了6种薄膜材料在次氯酸钠(NaClO)溶液、HCl溶液(pH=2)和NaOH溶液(pH=12)中的稳定性及其在普通小球藻培养体系中的生物附着行为。结果表明,聚氯乙烯(PVC)在3种溶液中浸泡后420 nm处的透光率下降约50%,聚氨酯(PU)在NaClO溶液中、乙烯?醋酸乙烯酯(EVA)在NaOH溶液中浸泡后420 nm处的透光率下降10%?15%,聚乙烯(PE)、聚丙烯(PP)和聚对苯二甲酸乙二醇酯(PET)在3种溶液中浸泡后的透光率没有明显变化;6种薄膜材料在普通小球藻培养体系中均有微藻明显附着,浸泡7 d后透光率明显下降,其中PVC表面附着最严重,浸泡7 d后透光率接近0,附着物量随浸泡时间延长而增加,浸泡45 d后达3069 ?g/cm2;其它5种薄膜表面附着物量先增加后降低,PU和EVA在第15 d时、PE, PP和PET在第30 d时附着物量最大,分别为292, 375, 292, 194和236 ?g/cm2。     

预掘双回撤通道末采应力分布特征与围岩控制研究

针对万利一矿31煤工作面末采期间矿压显现剧烈、回撤通道变形大而影响回撤效率的问题,通过现场监测、数值模拟、理论分析等方法,研究了回撤通道顶板结构及裂隙发育情况,并通过建立的FLAC3D数值模型,分析了工作面前方的应力矢量分布规律和末采期间回撤通道的塑性区演化规律,基于此,结合工程类比提出针对性的回撤通道补强支护方案,现场应用后有效控制了围岩失稳,效果良好。     

塑料挤出机机筒壁厚设计的线性回归模型

基于力学理论和热平衡原理,建立了塑料挤出机机筒壁厚设计的线性回归模型,并从理论上论证了模型的合理性。利用一些成熟产品的设计给出了模型的解,且据此求得的产品设计参数与经验值高度吻合,明显改进了文献提供的参考值,表明模型在实践中是有效的。     

A method of predicting macroscopic yield strength of polycrystalline metals subjected to plastic forming by micro-macro de-coupling scheme

We introduce a method of predicting the macroscopic yield strength of polycrystalline metals subjected to plastic forming, which hinges on the reliability of the micro-macro decoupling scheme for solving the corresponding two-scale boundary value problem. A polycrystalline aggregate composed of several crystal grains is adopted as a periodic microstructure, namely unit cell, and is regarded as a numerical specimen for numerical material tests (NMTs) based on the homogenization theory. The NMTs are conducted to identify the material parameters of the assumed approximate macroscopic constitutive model and followed by the de-coupled macro-scale analysis to simulate the macro-scale forming process. We then conduct the de-coupled micro-scale analysis by applying the resulting macroscopic deformation histories to the microstructures associated with the macroscopic points of interest in order to obtain the numerical specimens after plastic forming. Finally, the NMTs are conducted on the prepared specimens to evaluate the macroscopic post-forming yield strengths. We validate the proposed method by taking the three-step forming process as an example of macroscopic plastic forming. The validation of the method is made in comparison with the results with those obtained by the equivalent two-scale analysis with the coupling scheme. To demonstrate the capability and promise of the proposed method for practical applications, we also present an numerical example of the rolling process that causes the texture development in crystal grains.     

内部爆炸加载条件下圆柱钢壳的动态断裂

在内部爆炸冲击波载荷作用下,爆炸容器的动态断裂是进行爆炸容器安全评估和失效分析的基础。为了研究爆炸容器的动态断裂特征,进行圆柱钢壳在中心装药的爆炸加载实验,采用非线性动力有限元分析程序LS-DYNA分析圆柱钢壳的弹塑性动力响应,研究圆柱钢壳的宏观变形和断口的宏观、细观形貌,分析圆柱钢壳的断裂模式及断裂机理。结果表明,圆柱钢壳纵向断口具有微孔聚集型剪切韧窝断裂特征,呈现出微孔聚集型剪切韧性断裂模式。内部爆炸冲击波加载下圆柱钢壳因径向膨胀发生动态塑性变形,产生剪切带,由于剪切带的软化效应而成为优先断裂通道,剪切带和环向拉应力的共同作用是形成微孔聚集型剪切韧窝断裂这种混合韧性断裂模式的原因。     

小范围屈服条件下复合材料裂纹尖端塑性区分析

基于复合材料力学,推导Tsai-Hill强度准则在平面应力和平面应变条件下的一般表达式,得到了小范围屈服条件下,含中心裂纹无限大板Ⅰ型裂纹、Ⅱ型裂纹和Ⅰ/Ⅱ复合型裂纹尖端塑性区的解析解。针对不同裂纹倾角及泊松比 和,对裂尖塑性区进行了计算和分析。结果表明平面应变条件下塑性区范围小于平面应力条件下塑性区范围,参数、和 对复合材料裂尖塑性区范围和形状有明显的影响,不同的参数值得到的塑性区结果差别很大。另外,该解既适用于各向异性复合材料,也适用于各向同性材料。