氯丁橡胶胶粘剂

1低温聚合、快速结晶型氯了用胶氯丁橡胶的结晶度与反式1，4含量有关，而反式1，4含量又是由乳液聚合温度决定的，聚合温度越低，反式1，4含量越高。为了得到快速结晶型氯丁橡胶，聚合必须在较低温度下进行，一般不高于15℃。快速结晶型氯丁橡胶广泛用于鞋底的粘接、层压板的粘合、汽车装饰，以及其它多种用途。主要从引发剂、调节剂等几个方面改进氯丁橡胶的性能：2＠基氯T橡胶。驻基氯丁胶是氯丁二烯和甲基丙烯酸的共聚物，是非结晶性，适用于室温硫化和耐热性用途。与快结晶型氯丁橡胶相比，由其配制的胶粘剂粘结强度形成更快，耐热性增…     

伪随机流场法在堤坝渗漏探测中的应用与研究

伪随机流场法具有快捷、直接、精确有效等优点,逐步成为堤坝渗漏探测的主流方法。利用该方法,在漏水区域、库区无穷远段进行高压供电,库区内网格状布置测点,可查找渗漏入水点。通过对各异常区域的区域面积、异常区域内各测点的异常平均值以及对于严重渗漏的临界值进行计算,可判断水库渗漏通道和各渗漏点的渗漏量比例。此外,由于该方法快速便捷的特点,可以运用该方法进行实时监测。应用于某混凝土面板堆石坝的探测结果表明,利用堤坝周边已经存在的监测孔或在灌浆帷幕下游进行钻孔,进行伪随机电位差或者电流测试,可在无损条件下判断渗漏来源和通道发育方向,检测防渗处理效果。该方法可为堤坝渗漏监测预警、拟定防渗处理方案提供依据。     

提高PVC糊树脂质量小结

叙述了降低PVC糊树脂产品中氯乙烯残留量、稳定糊黏度的措施。通过改进，提高了产品质量。     

Si加入量对Si_3N_4-SiC复合材料性能的影响

固定其他组分配比不变,仅改变配方中Si粉加入量即Si粉从10％增加到60％,经过准静态氮化法反应烧结制得Si3N4——SiC复合材料,并对其进行力学性能、XRD和SEM检测,实验结果显示:随着Si加入量的增加,复合材料的强度逐渐增大,而密度却呈现减小趋势,生成的Si3N4-中β-Si3N4含量增加,形成的网络结构的致密度也相应增大,但β-Si3N4晶粒减小。     

车辆出行轨迹调查分析中的丢点轨迹还原

针对利用车牌照生成车辆出行轨迹过程中由于车牌遗漏而产生的丢点轨迹问题, 提出一种丢点轨迹还原方法。首先建立一次可达网络模型来描述调查点之间直接可达关系, 并构建轨迹还原解集; 考虑时距相符程度、路径模式匹配程度、路径曲折度指标, 构造轨迹的效用函数, 利用逼近理想解排序的TOPSIS法进行轨迹还原解集决策, 得到最优的还原解。通过一个丢点轨迹示例进行了实验分析, 结果表明, 该方法可以得到满意的丢点还原解。     

ADHESION OF ELASTOMERS: DWELL TIME EFFECTS

The strength of adhesion of elastomers to rigid substrates generally increases with time of contact. This effect has been studied for samples of butyl and chlorobutyl rubber adhering to some rigid substrates. The peel strength increased continuously over long periods of contact until in some cases failure became cohesive within the elastomer layer. At higher temperatures the strength increased more rapidly, consistent with the WLF relation governing molecular motions. It is postulated that slow molecular rearrangements occur at the interface and increase the bond strength. A criterion for the observed transition from interfacial to cohesive failure is suggested.     

坦克装甲车辆用橡胶履带板的研究开发

探讨了坦克装甲车辆用橡胶履带板（ＴＴＲＰ）的损坏摸式及其机理，从胶料配合，性能测试等方面评 ＴＴＲＰ的研究开发进展，并对我国ＴＴＲＰ的研究提出了建议。     

Effects of primary and quaternary amine intercalants on the organoclay dispersion in a sulfur-cured EPDM rubber

The effects of primary and quaternary amine modified montmorillonite (MMT) on the nanocomposite formation in an ethylene/propylene/diene rubber (EPDM) were studied. The organoclay was introduced in 10 parts per 100 rubber (phr) amount in the related recipes. X-ray diffraction spectra (XRD) were recorded in various stages of their processing in order to get information about the intercalation process. The curatives found to play a crucial role, as they promote the intercalation/exfoliation phenomena. Incorporation of MMT modified with octadecylamine (MMT-PRIM) in the EPDM and its more polar version (contains maleic anhydride grafted EPDM, EPDM-MA) resulted in intercalated and exfoliated structures, respectively. Deintercalation of the clay (collapse of the layers), generated in both EPDM and EPDM-MA during vulcanization, was attributed to the reactivity of the PRIM and to its ability to participate in complex formation with the curatives (vulcanization intermediates). This explanation was supported by the non-collapse of the MMT layers when the less reactive modifier, viz. octadecyltrimethylamine served as MMT intercalant (MMT-QUAT). In the latter case the corresponding nanocomposite contained mostly intercalated clay layers based on XRD and transmission electron microscopic (TEM) results.     

阳离子型双子表面活性剂的合成及表面活性

合成了一种季铵盐型双子表面活性剂Gem in i 12-3-12,采用红外光谱、元素分析和两相滴定法对其结构和纯度进行了分析,测定了不同浓度表面活性剂水溶液的表面张力,并得到临界胶束浓度(CMC)、饱和吸附量(Γm ax)、单分子饱和吸附面积(Am in)。结果表明,Gem in i 12-3-12的收率为77.2%,纯度为98.4%,它与相应的单尾基十二烷基三甲基溴化铵(DTAB)的表面活性相当,但CMC比DTAB低14倍左右。     

Catalytic characteristics of various rubber-reinforcing carbon blacks in decomposition of methane for hydrogen production

Carbon black has recently been reported to act as an effective catalyst for methane decomposition and to exhibit stable catalytic behavior despite carbon deposition, and thus it can be used for CO₂-free production of hydrogen from natural gas. In this work, various carbon blacks with different primary particle size were investigated with respect to methane decomposition under atmospheric pressure from 1123 to 1223 K. Catalytic characteristics, such as activity, activation energy and reaction order, were investigated and compared. It was observed that with decreasing primary particle size (or increasing specific surface area), the specific activity increased and the activation energy decreased. The reaction orders for various pelletized, rubber-reinforcing carbon blacks were 0.6–0.7, about the same regardless of the primary particle size, while they were near 1 for fluffy carbon blacks. Fluffy carbon black showed higher activity and activation energy than the pelletized carbon black of the same primary particle size. Changes of the surface morphology during carbon deposition were observed by TEM. Variations of the number of active sites were discussed in regard of the primary particle size, carbon deposition and binder. The presence of different types of active sites was also suggested.