增粘树脂在SBS改性胶粘剂中的应用

研究了增粘树脂在SBS改性胶粘剂中的应用，其中包括增粘树脂品种、用量对胶粘剂剥离强度的影响，同时研究了该胶粘剂对各种鞋材的粘结性。结果表明，该胶对许多鞋材的初粘力和剥离强度都达到了制鞋业的要求。     

抗氧剂对SBS老化行为研究

研究了SBS添加不同抗氧体系的热氧老化行为,考察了SBS拉伸强度、扯断伸长率、扯断永久变形、硬度随热氧老化时间的变化规律,结果标明SBS在热氧老化过程中其拉伸强度、扯断伸长率会出现峰值,随后呈下降趋势,而SBS的扯断永久变形呈上升趋势,硬度则渐渐下降。选择抗氧体系对SBS抗热氧老化性能影响显著。     

Adhesion properties of UV crosslinked polystyrene-block-polybutadiene-block-polystyrene copolymer and tackifier mixture

The peel and tack properties of mixtures of polystyrene-block-polybutadiene-block-polystyrene (SBS) and a tackifier were investigated after these were crosslinked by ultraviolet (UV) irradiation at various amounts of benzophenone (BP) as a photoinitiator and trimethylolpropane mercaptopropionate (TRIS) as a crosslinking agent.The degree of crosslinking of polybutadiene (PB) block in the SBS mixture was qualitatively estimated from the amount of gel fraction as well as the change in the glass transition temperature of the PB block. The crosslinking of the PB block was done within 3 min after UV irradiation and the peel strength of crosslinked specimens was as low as 45[percnt] of specimens without crosslinking. Nano-tack and bulk tack properties as well as the surface tension of mixtures were measured depending upon amounts of BP and TRIS.     

Quantitative analysis on distribution of modifier in microstructure of SBS modified asphalt

A method was developed to make a quantitative analysis of the microstructure of asphalt modified with styrene-butadiene-styrene block(SBS) copolymer. Moreover, both mixed and branched SBS were employed in the preparation of modified asphalt. By sampling specimens from the top, middle, and bottom, a number of microscope slides were made and 400 times micro images were gained. Binarized with the software of MATLAB, the images then went to the process of distribution test, when four typical distributions were employed to investigate the distribution of modifi er spread in asphalt. The distribution characteristic and its parameter were both found. The results show that asphalt phase clearly obeys Poisson distribution, and its parameter, λ, is bond up with the condition SBS performs in. Based on this parameter, indexes can be set up to evaluate the structure of the mixture and its performance as well. Compared with that modifi ed with mixed SBS, the asphalt modifi ed with branched SBS has better performance but worse stability, for it is easier to segregate.     

SBS改性沥青超热老化模式下氧化与挥发的贡献机理

利用宏观和微观分析相结合的方法,定量分析了SBS改性沥青超热老化模式下氧化与挥发的贡献机理。通过研究不同老化温度下常规三大指标,DSR流变车辙因子分别在空气氛和高纯氮气氛下老化的衰变规律,并结合傅里叶变换红外光谱微观表征手段,定量计算出SBS改性沥青超热老化过程中氧化与挥发的贡献率,得出SBS改性沥青在超热老化模式下,其老化机理是以SBS分子中的双键被氧化为主要因素,但随着超热老化温度升高,小分子挥发等非氧化因素逐渐成为超热老化的又一主要因素。宏观分析中,从普通老化的163℃到超热老化的198℃,氧化与挥发对SBS改性沥青针入度衰减的贡献率比由6∶4变为1∶1;对延度衰减的贡献率比由7∶3变为1∶1;对车辙因子的贡献率比由24∶1变为2∶1;而红外光谱微观分析中,氧化与挥发对SBS改性沥青超热老化后不饱和双键的衰减贡献率比由7∶3变为1∶1。     

SBS改性沥青高温流变性能与相态结构的关系

为量化表征SBS改性沥青网络化程度,确定控制其高温性能的形态学参数,采用荧光形态学方法、多重应力蠕变回复试验、频率扫描试验分别对5种掺量、6个剪切时间的线型SBS改性沥青在64℃下的荧光数字图像、不可恢复蠕变柔量、频率敏感性进行了定量分析。结果表明:通过增大改性剂掺量、延长剪切时间,SBS改性沥青高温流变性能得到改善。SBS掺量低于5%时,仅靠延长剪切时间无法形成网络结构;相同剪切时间下,增大SBS掺量即可形成网络结构。本文选取图像连通域和面积比率共同描述SBS改性沥青的相态变化特征,并建立了流变指标与形态学参数间的关系模型,为直接利用形态学方法预估、评价改性沥青高温性能提供理论依据。     

基于表面理论的温拌SBS改性沥青-集料体系的粘附性

采用躺滴法检测了掺加1.5%、3%的Sasobit和0.5%、1%的Evotherm 3G制备得到的温拌SBS改性沥青与蒸馏水、甘油和甲酰胺3种液体的接触角;基于表面自由能理论,对比了温拌SBS改性沥青在无水条件下的表面自由能和粘聚功以及在有水条件下的剥落功;同时,考察了温拌SBS改性沥青和石灰岩质集料的粘附功和配伍率。结果表明:采用躺滴法可以准确检测温拌SBS改性沥青与常用检测液体的接触角;以粘聚功、粘附功、剥落功、配伍率作为评价指标可用于表征温拌SBS改性沥青-集料体系的粘附性;温拌SBS改性沥青的表面自由能及其分量、粘聚功、配伍率随着Sasobit掺量的增大而减小,但随着Evotherm温拌剂掺量的增加而增大;水的参与降低了温拌剂对SBS改性沥青-集料体系粘附性影响的差异;Evotherm温拌剂有助于改善温拌SBS改性沥青的水敏感性,Sasobit温拌剂增加了温拌SBS改性沥青的水敏感性。     

老化SBS改性沥青二次改性再生工艺及机理研究

为研究老化SBS改性沥青的二次改性再生效果,比较不同工艺对再生效果的影响,首先通过常规试验、SHRP试验选择恰当的SBS改性沥青老化模拟方式,然后对添加SBS改性剂、新沥青进行再生的3种工艺展开研究,并借助红外光谱试验分析不同掺加顺序对老化SBS改性沥青再生效果的影响,确定了改性剂及新、旧沥青的最佳比例和最佳工艺。结果表明:采用RTFOT试验进行老化模拟更加方便、科学,RTFOT试验5h获得的改性沥青指标与服务年龄为7年的SBS改性沥青一致;SBS改性剂、新沥青添加顺序与老化沥青再生效果关系密切,先将SBS改性剂和新沥青混合制备改性沥青,再将改性沥青与老化沥青混合的工艺可使再生沥青性能最佳,其中SBS最佳掺量为4%,新、旧沥青质量比为2。     

Experimental investigation on preparation and performance of clear asphalt

Abstract

Coloured micro-surfacing technology has become increasingly popular in pavement construction because of its economic benefit and ability to accept traffic quickly. The main goal of this study was to produce a clear asphalt with superior performance that can be easily emulsified. Two types of resin that are easy to emulsify and one kind of extract oil were used to synthesise the clear asphalt. The clear asphalt was mixed with a styrene butadiene styrene (SBS) modifier at different proportions using a mechanical agitator. The physical properties of the samples were determined via conventional bitumen tests and the optimum formula was obtained by changing the mixture ratio through orthogonal experimentation. The thin-film oven test evaluated the ageing property of the clear asphalt. The surface energy components corresponding to the advancing process and the receding process were determined using the Wilhelmy plate method. The surface free energy (SFE) of the aggregates was measured with a gravimetric sorption analyser. The adhesive bond energies between asphalt samples and aggregates were calculated using their SFE components to evaluate their properties of fracture and healing. Results show that depending on the amount and type of resin added, different synthetic clear asphalts can be obtained. Further, the clear asphalt mixed with SBS is capable of synthesising better properties at high or low temperature. The clear asphalt with aggregates had fracture and healing properties similar to common base asphalt.     

二氯二茂钛的合成及其对SBS加氢催化性能的研究

以二聚环戊二烯(dicyclopentadiene)为原料,将其裂解得到环戊二烯(cyclopentadiene,Cp);在二乙胺存在的条件下将其与四氯化钛反应,合成了二氯二茂钛(titanocene dichloride,TDC),并以合成的目标产物作为丁苯嵌段共聚物(SBS)加氢催化剂,对其催化性能进行了研究。当加氢反应温度为70℃,压力为2.0MPa,催化剂用量为0.4mmol/100g聚合物时,SBS中加氢度达到94.2%。说明目标产物具有良好的催化性能。