Development of Solar Drying

Importance of Solar Drying is increasing worldwide, especially in areas where the use of the abundant, renewable and clean solar energy is essentially advantageous. In the developing countries and in rural areas the traditional open-air drying methods should be substituted by the more effective and more economic solar drying technologies.

R&D needs should be considered in the basic research and experimental fields; in performance measurement; in the modelling-simulation-design and testing. The international co-operation of experts should be improved and more efforts would be needed in the policy and in the public information.     

Flexible and light weight copper indium diselenide solar cells on polyimide substrates

Thin film flexible CuInSe₂ (CIS) solar cells have been fabricated for the first time on light-weight polymeric substrates. Evaporated Cu---In alloy precursors were selenized in H₂Se atmosphere at around 400°C to grow the CIS absorber layers. Low temperature techniques which are compatible with the polymeric substrates were used to deposit the window layers of CdS and ZnO. The demonstrated active area conversion efficiency of 9.3% makes this light-weight device very attractive for many terrestrial and space power generation applications where high specific power and mechanical flexibility are needed.     

大庆长垣南部油田周期注水的做法及效果

本总结了大庆长垣南部周期注水的做法和效果。实践证明，在低渗透，薄油层，单井低注低产的油田上实施周期注不仅能够改善油田开发状况，而且也为低注井的冬季管理提供了方便条件。     

Stationary and traveling hot spots in the catalytic combustion of hydrogen in monoliths

In the course of catalytic combustion of hydrogen (1-5% H₂ in air) in monolith reactors, strongly localized stationary and traveling hot spots arise in response to a sudden and persistent rise of gas flow velocity. Such hot spots may occur, e.g. in a catalytic converter following the acceleration of a car or in a catalytic combustor as a result of a load increase. This phenomenon is illustrated by simulations using a two-phase reactor model. The temperature overshoot of the adiabatic limit is typically of the order of the adiabatic temperature rise itself.The following mechanism underlies this behavior. Light fuel is supplied to the catalytic wall by fast diffusion (in the direction perpendicular to flow), while the heat released by reaction is removed from the wall by the slower, mixture-averaged heat conduction. This leads to accumulation of heat at the catalytic surface that eventually saturates at high temperatures. The hot spots may exhibit intricate dynamics, propagating downstream or upstream, or they may remain stationary. The direction of propagation depends on the relative strength of convective downstream and conductive upstream contributions to the overall displacement of reaction fronts. Generally, the hot spot tends to drift downstream at low flow velocities, remain stationary at intermediate flow velocities, and drift upstream at high flow velocities.     

谈节水灌溉的推广应用

全面推行节水灌溉势在必行，结合江西省上饶地区节水灌溉的推广工作，总结经验，提出了相应的对策和建议。     

潦河灌区农业水费计收现状分析及对策

阐述了潦河灌区农业水费计收现状，对水费计收现状进行分析并提出解决办法。     

东营深层盐膏层钻井液工艺

胜利油田东营深层盐膏地层发育,盐膏段厚度大,分布范围广,地层岩性十分复杂,钻井中经常发生喷、漏、塌、卡,遇阻、划眼、电测遇阻等井下复杂事故。郝科1井是在该区设计的一口重点深探井,宅钻井深5807.81m,井底最高温度230℃。介绍了深层盐膏层钻井液体系的转化工艺、性能控制、维护处理、防漏、堵漏、固相控制、抗污染和钻具缓蚀等技术,以及MMH聚合物饱和盐水钻井液在郝科1井的成功应用。结果表明,该钻井液在高密度下对盐膏层具有较强的抑制性、悬浮携砂性和抗污染性,抗温220—230℃。MMH聚合物饱和盐水钻井液体系及其配套技术满足了深层盐膏层钻井施工需要。     

酒精中甲醇,水在NaA沸石上吸附性能的研究

本文测定了酒精中甲醇、水单组分及二元组分的吸附等温线,并用Langmuir方程进行了拟合。在固定床动态吸附研究申测定了酒精中甲醇、水单组分及双组分吸附穿透曲线;着重考察了流速、温度、不同甲醇和水含量对双组分吸附性能的影响。对二个组分的传质机理及置换关系进行了分析探讨。     

IEA joint trials: New lessons from old plantations

Two international trials of potential biomass species families and clones planted in 1985 have been analyzed to determine changing patterns in growth, diseases, and insects. In the Swedish trial, with close spacing and short rotations, Salix viminalis clones gave the best average yield of 17.4 Mg/Ha/yr on the first coppice rotation. In the Minnesota, USA trial, with wider spacings and a longer rotation Populus alba hybrid clones gave the best average yields of 5.5 Mg/Ha/yr. The most important disease and insect problems encountered were Septoria musiva stem cankers on some Populus clones; frost die back in some Salix clones; and the leaf blotch miner, Fenusa dohrnii, on most Alnus families. Recommendations for future international cooperation in field trials are presented.     

工业用水中硅酸根离子分析技术的现状与发展

综述了工业用水中硅酸根离子的基本分析方法以及分析仪器的开发应用现状；论述了流动注射分析技术（ＦＩＡ）在工业用水中硅酸根离子分析上的应用并预示了水质分析中在线预富集技术与多组分联合测定技术的发展。