关于供排水管网的水力计算和校核

以往对电站技术供排水系统大都未进行水力平差计算，致使一些实际电站的供排水系统达不到预期的效果，甚至影响机组的正常运行。据此，给出了供排水管网的平差计算方法，有利于正确评估电站管网，另外，提出了管网校核应注意的问题。     

薄膜微型电源

介绍了新型的薄膜微型电源的工作原理、结构及制造工艺。     

鄱阳湖流域水土保持与防洪治涝

鄱阳湖流域水土流失加剧了洪涝灾害。治理水土流失能增强山丘地涵养水源的能力,削洪减沙,减少库容损失,降低河床,具有明显的防洪效益。进行流域防洪规划时,应将防治水土流失与防洪治涝结合起来,因地制宣,综合治理。     

The viscosity of liquid water at pressures up to 32 MPa

The paper reports new, preliminary measurements of the viscosity of liquid water along two isotherms as a function of pressure up to 32 MPa. The measurements have been performed with a vibrating-wire viscometer especially modified for the purpose. The instrument has been calibrated with respect to the viscosity of water at a pressure of 0.1 MPa and a temperature of 293.15 K, for which an accurate reference value is available. With due regard to the precision of the determination of individual quantities and the accuracy of the calibration data, it is estimated that the accuracy of the present results is one of ±0.3% under all conditions.Paper dedicated to Professor Joseph Kestin.     

黄河中游多沙粗沙区水沙控制途径的探讨

根据黄河中游多沙粗区暴雨洪水及产流产沙特点，提出了为控制水沙危害，黄河中游治理应分两步走的战略。第一步解决近期水沙控制和耕地问题，主要措施是建设淤地坝和骨干坝。研究表明，在现状坝地，梯田条件下，为满足粮食生产需要，每平方公里需新增坝地３．１８ｈａ，且能港口控制水沙的要求。第二步是进行坡面治理，改善生态环境，以达到根治水沙的目的。     

挟沙水流中沙粒对底壁湍流猝发的影响

本文在常规的边界层方程中保留了法向压力梯度项和增加了固粒对流体的使用项，结合Ｂａｔｃｈｅｏｌｒ对交界面提供的分析方法和小扰动稳定性理论，由理论分析和计算得到了包括沙粒之类的悬浮体的尺寸，比重，流动Ｒｅ数，两相速度差以及扰动波数与水流底壁湍流猝发角的关系，计算结果与Ｒａｓｈｉｄｉ等的实验结果相符。文中所得结果有助于进一步了解江河底部水流的流动特性以及泥沙的沉积和输运机理。     

液压胀形轧辊油槽深度的确定

对液压胀形轧辊（即国外的ＶＣ轧辊）辊套热装后的弹性变形进行了有限元分析，给出了确定油槽最小深度的计算公式。本文的有限元计算结果与实验结果吻合，某些结论可为液压胀形轧辊的结构设计提供理论依据。     

The effect of pre-wetting on dynamic contact angles

A roll-coating experimental system is used to study the effect of pre-wetting on dynamic contact angles, the interfacial displacement depth, and the associated phenomenon of air entrainment. The system consists of a roll, which is horizontally rotating in a liquid pool. The dynamic contact angle is recorded by a macrophotography system. The test liquids are glycerol solutions with viscosities in the range 104 < μ < 748 mPa · s. The value of (μV/ρg)^0.5 is taken as the characteristic length to be used in the dimensionless relationships which correlate experimental measurements. The effect of base layer entry angle into the liquid pool on the dynamic contact angles and other flow parameters is studied. Comparison is made with measurements in dry tape-coating and other pre-wet roll–coating systems.     

高水固结尾砂充填采矿充填体合理配比的研究

高水固结尾砂充填采矿是一种新型充填采矿法。试验测定了高水固结尾矿充填体的强度和变形特征；研究分析了影响充填体强度的主要因素、高水充填工艺的特殊要求，以及上向，下向进路开采对充填体强度和稳定性的要求，提出了满足支护强度，工艺及经济需求的充填材料的合理配比范围。     

NUMERICAL SIMULATION OF STREAMBED HEAT TRANSFER

１．　ＩＮＴＲＯＤＵＣＴＩＯＮＴｈｅｓｉｍｕｌａｔｉｏｎｏｆｓｔｒｅａｍｗａｔｅｒｔｅｍｐｅｒａｔｕｒｅｉｓｓｉｇｎｉｆｉｃａｎｔｌｙｉｍｐｏｒｔａｎｔｆｏｒｔｈｅｓｔｕｄｙｏｆｎｕｍｅｒｉｃａｌｍｏｄｅｌｉｎｇｏｆｒｉｖｅｒｉｃｅｐｒｏｃｅｓｓｅｓ［１］　．Ｈｉｓｔｏｒｉｃａｌｌｙ，ｔｈｅｍａｔｈｅｍａｔｉｃａｌｍｏｄｅｌｉｎｇｏｆｔｈｅｔｒａｎｓｐｏｒｔａｎｄｆａｔｅｏｆｈｅａｔｉｎａｗａｔｅｒｂｏｄｙｈａｓｂｅｅｎｔｈｅｓｕｂｊｅｃｔｏｆｅｘｔｅｎｓｉｖｅｓｔｕｄｙｆｏｒｖａｒｉｏｕｓｒｅ…