The effects of Ni and Li doping on the performance of lithium manganese oxide material for lithium secondary batteries

Layered Li_0.7[M_1/6Mn_5/6]O₂ (M=Li, Ni) was synthesized using a sol-gel method. P2-Na_0.7[M_1/6Mn_5/6]O₂ precursor was first synthesized by a sol-gel method, and then O2-Li_0.7[M_1/6Mn_5/6]O₂ was prepared by an ion exchange of Li for Na in P2-Na_0.7[M_1/6Mn_5/6]O₂ precursor. From charge/discharge curves, it was seen that Li_0.7[Li_1/6Mn_5/6]O₂ has two plateaus similar to those observed from a spinel structure, but Li_0.7[Ni_1/6Mn_5/6]O₂ holds a single plateau as observed from a typical layered structure. It was considered that Li_0.7[Li_1/6Mn_5/6]O₂ undergoes a phase transformation from layered to spinel structure during the charge/discharge cycle, but Li_0.7[Ni_1/6Mn_5/6]O₂ maintains O2-layered structure after the cycles. Li_0.7[Ni_1/6Mn_5/6]O₂ was higher in discharge capacity and retention rate than Li_0.7[Li_1/6Mn_5/6]O₂.     

Novel lanthanide salicylaldimine complexes with unusual coordination mode

The one-step metal promoted reaction between salicylaldehyde and 4-methyl-1,3-phenylenediamine in the presence of lanthanum(III) or gadolinium(III) nitrate yields new salicylaldimine complexes containing N,N′-bis(salicylidene)-4-methyl-1,3-phenylenediamine as a result of the [2 + 1] Schiff base condensation. The crystal structure of the gadolinium complex reveals a dinuclear species with four unionized ligands coordinating in the monodentate and bridging bidentate fashion, using exclusively the oxygens as donor atoms with the nitrogen atoms not being involved in coordination. The coordination number of nine is achieved by involving three bidentate nitrate counterions in the coordination sphere.     

抗冲聚丙烯结构与性能研究

对部分国内外抗冲聚丙烯(PP)产品进行了微观形态和结构分析，研究其对材料宏观力学性能的影响。实验结果表明：抗冲PP是一个含有PP均聚物、丙烯与乙烯-丙烯两嵌段共聚物、乙丙橡胶(EPR)、聚乙烯均聚物等的多相体系。EPR的分子序列结构对聚合物抗冲击性能起主要作用。在序列结构中，丙烯、乙烯单体在分子链上的位置交换越频繁，抗冲击性能越得到提高。丙烯序列平均长度的增大对抗冲击性能有一定的削弱作用。     

On the ‘curiosity’ of electrical self‐heating,static charge and electromagnetic shielding effectiveness from carbon black/aluminium flakes reinforced epoxy‐resin composites

This paper shows the wide application range (such as electrical self‐heating and electromagnetic shielding effectiveness) of composites consisting of conductive carbon black/aluminum flakes (CBA) filler and epoxy insulative matrix. The effect of CBA content on the network structure of epoxy matrix was investigated in detail. Static electrical conductivity increases linearly with the increase of filler concentration at the interface in epoxy composites. The large decrease of the conductivity as a function of the temperature is analyzed in terms of the negative temperature coefficient of conductivity (NTCC) effect. The influence of viscosity, surface energy and barrier highest energy on the NTCC behaviour in the composite is also considered. Based on these results, a new interpretation is proposed to explain the NTCC phenomena by computing the swelling force among conductive phases. The correlations of conductivity during the temperature cycling and activation energy were analyzed. The effects of dynamic ageing at various temperatures on the resistivity are reported. Current–voltage–temperature characteristics for epoxy with different contents of CBA were examined in detail. A model based on the law of energy conservation is proposed to calculate the specific heat and amount of heat dissipation. The static charge of the epoxy–CBA composites was estimated. The correlation between electromagnetic wave‐shielding effectiveness (EMS), conductivity and frequency of epoxy composites with different filler contents is also discussed. Furthermore, the effect of annealing on EMS of epoxy composites was examined. © 2002 Society of Chemical Industry     

[Zn(BDC)(H2O)2]n: a novel blue luminescent coordination polymer constructed from BDC-bridged 1-D chains via interchain hydrogen bonds (BDC = 1,4-benzenedicarboxylate)

A novel coordination polymer [Zn(BDC)(H₂O)₂]_n 1 (where BDC = 1,4-benzenedicarboxylate), has been synthesized and characterized by X-ray diffraction. 1 crystallizes in the monoclinic space group C2/c, a=15.09(2) Å, b=5.058(7) Å, c=12.196(16) Å, β=103.62(2)°, , Z=4. The most striking feature of 1 is that it consists of a high-dimensional network structure constructed from BDC-bridged 1-D chains via interchain hydrogen bonds. The coordination sphere of the zinc(II) ion is a distorted tetrahedron completed by four oxygen atoms from two water molecules and two BDC ligands. BDC adopts the bis-monodentated (syn–anti) coordination mode linking two adjacent zinc(II) ions. 1 shows strong blue photoluminescence as the result of the fluorescence from the intraligand emission excited state.     

聚乳酸-聚氨酯微球的合成及其形态的研究

以低相对分子质量生物可降解D，L-聚乳酸(D，L-PLA)二醇和六亚甲基二异氰酸酯(HDI)为原料、1，4-丁二醇(BD)为扩链剂及聚乙烯基吡咯烷酮(PVP)为悬浮剂，通过悬浮聚合法初步合成了一种新型聚氨酯微球(PUMS)。用扫描电子显微镜(SEM)考察了BD的含量对微球表面形态的影响，通过激光粒度分析仪讨论了搅拌速率和PVP浓度对微球粒径及其分布的影响，用傅立叶变换红外光谱(FTIR)粒度分析仪对微球的化学结构进行了表征。结果表明，合成的微球的平均粒径随搅拌速率和PVP浓度的增加而减少，粒径分布变宽；当搅拌速率为400r／min，PVP质量分数为1．5％时。微球的平均粒径约47μm，粒径分布最窄。约在10～90μm；微球表面有孔，但随着BD含量的增加，微球表面变得相对粗糙，孔数减少，孔径减小，直至孔消失。     

粒子弥散强化氮化硅基陶瓷

运用晶界工程理论，选择能形成高耐炎度晶界相的Ｙ２Ｏ３和Ｌａ２Ｏ３双稀土氧化物为Ｓｉ３Ｎ４陶瓷烧结助剂，材料具有优异的高温强度。第二相碳化硅粒子的引入有效地改善了氮化陶瓷的显微结构和力学性能。以无压烧结工艺制备的高性能α／β－Ｓｉａｌｏｎ复相陶瘊等在实际应用中获得良好效果。     

轨迹空间中基于特征符号搜索算法的非刚体三维运动重建研究

现有研究一般是在正交约束条件下采用最小二乘法来求解三维运动轨迹基重建问题,然而这些算法的性能容易受噪声影响,产生不适定性。为此,通过利用离散线性的方法为三维运动搜索最优轨迹基系数和三维结构,建立了一种基于特征符号搜索算法的三维运动轨迹基重建方法。利用该方法,对一系列单目图像序列进行了重建实验研究,结果表明所提出的方法是可行的,并提高了重建算法的准确性。     

羧基偏氯乙烯丁苯胶乳粒子的相态结构和应用性能

以过硫酸铵为引发剂，十二烷基硫酸钠为乳化剂，采用种子聚合工艺，合成了偏氯乙烯质量分数为２３％～４３％的羧基偏氯乙烯丁苯胶乳。通过电镜观察到所合成的胶乳粒子具有核－壳结构。通过测定胶闰子表面层的羧基数量，研究了羧基的分布，结果表明，羧酸种类对羧基在胶乳粒子中及在聚合体系中的分布有重要影响，该胶乳作为地毯背衬粘合剂，具有粘合力高，极限氧指数高的特点，是一种较好的阻燃性粘合剂。     

全参考图像质量评价综述

图像质量评价是图像处理领域内一项很有意义的研究课题。客观图像质量评价方法可分为全参考评价方法、半参考评价方法和无参考评价方法, 目前全参考评价方法较为成熟, 而半参考和无参考评价方法则处于初级阶段, 远远达不到参考评价方法所能达到的效果。对全参考评价方法进行综述。首先简要地介绍了各种类型的评价方法, 其次详细地介绍了PSNR、SSIM、MSSIM、IFC、VIF、FSIM等几种典型的全参考图像质量评价方法, 然后在LIVE和TID2008数据库上进行实验, 对这几种全参考方法进行对比、分析, 最后探讨图像质量评价研究的发展趋势。