碾压混凝土坝应力场有限元及施工仿真分析

采用三维有限元法对某碾压混凝土坝(RCC)在施工导流期的应力场进行分析,着重校核了顶部未到设计龄期的碾压混凝土和大型导流底孔周边的应力分布;并初步探讨了在多因素影响情况下,从开始施工到蓄水运行的坝体温度场、应力场的全过程仿真分析方法。     

高温季节大体积混凝土基础施工的裂缝控制

文章以上海富华大厦工程为例,对在高温季节如何针对大体积混凝土基础施工的裂缝进行控制,提出了相关措施,达到了控制裂缝的预期目标。     

影响混凝土强度的因素及控制措施

分析了水泥强度等级、水灰比和骨料质量等内因,及施工条件、养护温度、湿度、龄期等外因对混凝土强度的影响,并提出了控制混凝土强度的相应措施,以确保混凝土强度符合设计及施工要求,从而保证建筑物结构安全。     

A multi-agent architecture for dynamic scheduling of steel hot rolling

Steel production is a complex process and finding coherent and effective schedules for the wide variety of production steps, in a dynamic environment, is a challenging task. In this paper, we propose a multi-agent architecture for integrated dynamic scheduling of the hot strip mill (HSM) and the continuous caster. The scheduling systems of these processes have very different objectives and constraints, and operate in an environment where there is a substantial quantity of real-time information concerning production failures and customer requests. Each process is assigned to an agent which independently, seeks an optimal dynamic schedule at a local level taking into account local objectives, real-time information and information received from other agents. Each agent can react to real-time events in order to fix any problems that occur. We focus here, particularly, on the HSM agent which uses a tabu search heuristic to create good predictive–reactive schedules quickly. The other agents simulate the production of the coil orders and the real-time events, which occur during the scheduling process. When real-time events occur on the HSM, the HSM agent might decide whether to repair the current schedule or reschedule from scratch. To address this problem, a range of schedule repair and complete rescheduling strategies are investigated and their performance is assessed with respect to measures of utility, stability and robustness, using an experimental simulation framework.     

Effects of Seismically Induced Pounding at Expansion Joints of Concrete Bridges

This paper presents the result of a study on the effect of pounding at expansion joints on concrete bridge response to earthquake ground motions. An engineering approach, rather than continuum mechanics approach, is emphasized. First, the dynamic behavior of a damped multidegree-of-freedom bridge system separated by an expansion joint involving an impact is examined by means of the finite element method. Second, the sensitivity analysis of the stiffness in gap elements is performed. Third, usefulness of the analysis method for simulation of pounding phenomena is demonstrated and the effect of pounding on the ductility demands measured in terms of the rotation of column ends is investigated. Two-dimensional finite element analysis using a bilinear hysterestic model for bridge substructure joints and a nonlinear gap element for the expansion joint is performed on a realistic bridge with an expansion joint. The effects of the primary factors on the ductility demand such as gap sizes and characteristics of earthquake ground motion are investigated through a parametric study. The major conclusions are (1) the effect of impact most directly depends on the size of momentum (or pounding magnitude); and (2) the pounding effect is generally found to be negligible on the ductility demand for wide practical ranges of gap size and peak ground acceleration, but is potentially significant at the locations of impact.     

某铁路医院加速器室大体积防射线混凝土施工

结合大同铁路分局中心医院直线加速器室工程实际，介绍了大体积防射线混凝土的特点及施工中应注意的事项，并阐述了具体的施工技术。     

街面水电站混凝土面板堆石坝主要技术问题探讨

街面水电站拦河坝为混凝土面板堆石坝,在面板止水结构型式、面板防裂措施、上游面的施工方法、趾板开挖处理及趾板灌浆等方面,根据工程实际情况,结合国内外的新技术新工艺进行了探讨。     

基于湿度扩散理论的混凝土早期收缩分析

混凝土早期收缩开裂是加剧混凝土劣化并导致最终失效的一个重要因素．分析混凝土早期的自由收缩量值是进行收缩开裂研究的基础。为此，基于湿度扩散理论建立了混凝士早期的自生收缩与干燥收缩计算分析模型，经实例验证，计算结果与试验结果有较好的一致性。     

定向爆破拆除框架式水塔

高 2 7m的水塔建于 193 4年 ,其顶部水罐由 12根钢筋混凝土柱支撑。在倒向侧 7根立柱上形成不同高度的爆破切口 ,背向侧倾倒中心线上的一根立柱上形成小爆破切口 ,其余 4根立柱底部打贯通孔 ,使水塔准确定向倾倒。文中讨论了立柱切口高度的计算 ,爆破参数的确定 ,并介绍了所采用的安全措施。     

抗裂合成纤维混凝土在尼尔基发电厂房工程中的应用

为了提高发电厂房水轮机混凝土蜗壳的抗裂、抗渗、抗冲击、抗震、抗冲耐磨性能，在尼尔基水利枢纽工程蜗壳混凝土的施工中掺加抗裂合成纤维，厂房项目部试验人员对蜗壳混凝土进行了掺加抗裂合成纤维（CTA Fiber）试验，试验结果及工程实际应用效果良好，提高了工程质量，支持了国家重点工程建设。