CAD系统中产品设计三维实体建模方法的研究

三维建模是应用CAD系统进行产品设计的重要步骤。现在市场上已有不少的CAD系统，但是不同系统中的三维建模方法却是基本相同的。在这些三维建模的方法中，往往对用户施加了许多的限制，使得用户无法建立复杂的三维实体。笔者提出了一种新的三维建模方法－折叠法，应用这种方法的概念和原理，可以开发出先进的三维建模CAD系统。折叠二维平面图形构成三维实体是作者提出的一种新概念。     

The influence of the ion content of whey on the pH-activity profile of the β-galactosidase from Aspergillus oryzae

The pH-dependence of the reaction kinetics of lactase (β-galactosidase) from Aspergillus oryzae in different reaction media is presented in terms of a two-parameter model. The lactase from A. oryzae seems to have replaced the A. niger lactase on the market owing to a better activity/price ratio and may be utilised for lactose hydrolysis in acid as well as in neutral milk products. Its pH optimum is around pH 4.5. However, in the neutral pH-range its activity depended strongly on the salt content of the substrate solution. For example, its activity in whey (pH 6.5) fell to only 30% of its expected activity in a pure lactose solution at the same pH. The whey effect was the same for both soluble and immobilised lactase. The two parameter kinetic model, which included a term for competitive product inhibition gave excellent agreement with experimental data, and may thus be useful for the prediction of reactor performance with this enzyme.     

Yeast exo-β-glucanases can be used as efficient and readily detectable reporter genes in Saccharomyces cerevisiae

Yeast exo-1,3-β-glucanases are secretable proteins whose function is basically trophic and may also be involved in cell wall glucan hydrolytic processes. Since fluorescein di(β-D -glucopyranoside) is a fluorogenic substrate detectable and quantifiable by flow cytometry, it was used for testing the ability of the EXG1 gene product of Saccharomyces cerevisiae and its homologous gene in Candida albicans to function as reporter genes. These open reading frames were coupled to different promoters in multicopy plasmids, and exoglucanase activity quantified at flow cytometry. Exoglucanases were found to be useful tools for the study of promoter regions in S. cerevisiae. This technique has the advantage over other reporter gene systems—such as β-galactosidase fusions—that it does not require permeabilization of yeast cells and therefore it allows the recovery of viable cells—by sorting—after flow cytometry analysis.     

K0.9Li0.1（Ta0.5Nb0.5）O3晶体压电应变系数的测量

用准静态ｄ＿（３３）测量仪和干涉法相结合。测量了Ｋ＿（０．９）Ｌｉ＿（０．１）（Ｔａ＿（０．５）Ｎｂ＿（０．５）Ｎｂ＿（０．５））Ｏ＿３晶体的压电应变系数。结果为：ｄ＿（３３）＝８６．０，ｄ＿（３３）＝一２９．５，ｄ＿（１５）＝１１２．９×１０￣（－１２）Ｃ／Ｎ．     

Nd：MgO：LiNbO3晶体的荧光光谱及其双晶体腔内互倍频实验

采用激光感生荧光技术测量了Ｎｄ：ＭｇＯ：ＬｉＮｂＯ３晶体的偏振荧光光谱，简要地说明了Ｎｄ：ＭｇＯ：ＬｉＮｂＯ３双晶体腔内互倍频的基本原理，并在实验中用染料激光作泵浦源实现了其双晶体腔内互倍频运转；得到５４３ｎｍ横模倍频绿光单端输出约ＹＭＷ，腔前泵浦阈值约３８ＭＷ，总转换效率约为１．３％。     

温度调谐LBO晶体光参量振荡器

本文详细研究０．５３２μｍ激光泵浦、温度调谐Ⅱ型非临界相位匹配ＬＢＯ光参量振荡器。当温度从２０℃升高到２００℃时，其信号波和闲置波的调谐范围分别为１．００２～０．８９８μｍ和１．１３４～１．３０６μｍ。本装置最吸引人之处是本征输出线宽比Ⅰ型情形小一个量级。     

钒冶炼焙烧添加剂选择研究

对小型钒冶炼厂焙烧工艺所用添加剂进行改进的可能性进行了探讨，研究了几种常用添加剂的焙烧条件，分析比较了其性能，提出用ＮａＣｌ－Ｎａ２ＣＯ３作焙烧添加剂替代ＮａＣｌ可大幅度减少大气污染，提高冶钒转化率；且不改变工艺流程，无需设备投资，具有较好的经济效益和环境效益。     

Processing and properties of zirconia-toughened alumina ceramics

Al₂O₃:ZrO₂ ceramics have been prepared from physically mixed pure oxide powders. The results indicate that careful processing of the starting powders and a two-stage sintering process can avoid expensive processing methods like hot pressing/hot isostatic pressing used for achieving high densification. The mechanical properties were measured and the resultant microstructure studied to explain the toughening behaviour of this material.     

Dislocations and flux pinning in YBa2Cu3O7

The dislocation structures of bulk textured and epitaxial thin film YBa₂Cu₃O₇ superconductors are examined. Correlations between increases in flux pinning and dislocation densities are noted. A model for flux pinning by individual dislocations is presented. This gives a treatment of strain induced effects and effects of normal state region interactions. It is shown that the values of pinning predicted are in line with experimental observations.     

硼酸使掺铁铝酸锂发光增强的现象

在硼酸存在下合成了掺铁铝酸锂荧光体,研究了在不同温度下硼酸加入量对荧光体发光强度的影响,并通过X射线粉末衍射和粒度分析,初步探讨了发光增加的原因。