Comparative analysis of methods for determining the metabolic rate in order to provide a balance between man and the environment

The incorrect determination of metabolic rate can be linked to discrepancies between the model of the PMV (Predicted Mean Vote) and real thermal sensation collected in field studies. Aiming to improve the correlation of the PMV model and the real thermal sensation, this work established new values for the metabolic rate: one way being called “calculated” using Newton's Method and the other called "measured" using a metabolic analyzer. Welder's activities were evaluated, through the measurements of environmental and personal variables. New values of metabolic rate were determined for this activity. The values found for the calculated form and the measured one were, respectively, 178.63 and 145.46 W/m², different from the range provided by the table of ISO 8996 (2004) for this activity (75–125 W/m²). In order to verify which of the values of the metabolic rate was closer to the real thermal sensation of PMV, a linear regression was made between the PMV and the real thermal sensation in three ways: S × PMV_tabulated (R² = 0.1749), S × PMV_calculated (R ² = 0.7481) and S × PMV_measured (R² = 0.7854). It was found that the values measured by the instrument gave a higher coefficient of determination which was chosen for the correction of the table. The correction of the table provides a value of M_predicted, that is a value of metabolic rate that corrects the values provided by the tables of ISO 8996 (2004), by means of a correction coefficient. For the welder's activities in a metal-mechanics industry, tabulated values can be multiplied by the correction coefficient 1.4648 in order to minimize inaccuracies. The PMV_predicted, obtained through the M_predicted, when related to the actual thermal sensation, provides a coefficient of determination of 0.7511, thereby improving the model of the PMV.     

A novel layered Li [Li0.12NizMg0.32−zMn0.56]O2 cathode material for lithium-ion batteries

Layered Li[Li_0.12Ni_zMg_0.32−zMn_0.56]O₂ oxide cathodes containing lithium atoms in the transition metal layers were synthesized and characterized using X-ray diffraction (XRD), galvanostatic cycling, and differential scanning calorimetry (DSC). The Li[Li_0.12Ni_zMg_0.32−zMn_0.56]O₂ cathodes deliver a specific discharge capacity of about 190 mAh/g at room temperature and 236 mAh/g at 55 °C when cycled between 2.7 and 4.6 V versus Li/Li⁺. Excellent capacity retention and smooth potential profiles at room and elevated temperatures over extended cycles suggest that this material does not convert into a spinel structure.     

浅析SRT-Ⅳ裂解炉炉管弯曲及断裂原因

主要分析计算了裂解炉炉管受力情况，进而得出结论：裂解炉自身结构的相互约束力和炉管渗碳是导致炉管弯曲、断裂的主要原因，并提出了相应的解决措施。     

EXTERNAL FLUID HEATING OF A POROUS ED

This work deals with the thermal analysis of externally heated porous beds of finite length. A one dimensional model was developed that includes conduction and storage in both the fluid and bed, convective exchange between the fluid and bed, and the effect of adsorption/desorption in the bed. This model results in two coupled differential equations for the fluid and bed temperatures as functions of four independent dimensionless parameters. These equations were solved numerically using finite difference approximations. A truncation error analysis was carried out to maintain an accurate solution. The method of normalization is such that the results of this analysis are of use in bed design when the breakthrough characteristics in finite length beds are of interest. A method to measure bed thermal performance is defined and a means to optimize bed thermal performance is presented. An experiment was conducted to validate the numerically obtained results. A comparison of numerical to experimental results is presented     

Enhanced thermal stability of poly(lactide)s in the melt by enantiomeric polymer blending

Poly(l-lactide) (i.e. poly(l-lactic acid) (PLLA)) and poly(d-lactide) (i.e. poly(d-lactic acid) (PDLA)) and their equimolar enantiomeric blend (PLLA/PDLA) films were prepared and the effects of enantiomeric polymer blending on the thermal stability and degradation of the films were investigated isothermally and non-isothermally under nitrogen gas using thermogravimetry (TG). The enantiomeric polymer blending was found to successfully enhance the thermal stability of the PLLA/PDLA film compared with those of the pure PLLA and PDLA films. The activation energies for thermal degradation (ΔE_td) were evaluated at different weight loss values from TG data using the procedure recommended by MacCallum et al. The ΔE_td values of the PLLA/PDLA, PLLA, and PDLA films were in the range of 205-297, 77-132, and 155-242 kJ mol⁻¹ when they were evaluated at weight loss values of 25-90% and the ΔE_td value of the PLLA/PDLA film was higher by 82-110 kJ mol⁻¹ than the averaged ΔE_td value of the PLLA and PDLA films. The mechanism for the enhanced thermal stability of the PLLA/PDLA film is discussed.     

Dielectric and thermal properties of dicyclopentadiene containing bismaleimide and cyanate ester. Part IV

A novel bismaleimide (BMI), bis(4-maleimidophenoxy-3,5-dimethylphenyl)dicyclopentadiene (DCPDBMI), containing a large dicyclopentadiene (DCPD) and aryl ether linkage, was synthesized from bis(4-aminophenoxy-3,5-dimethylphenyl)dicyclopentadiene and maleic anhydride by the usual two-step procedure that included ring-opening addition to give bismaleamic acid, followed by cyclodehydration to bismaleimide. The monomers were characterized by Fourier transform infrared spectroscopy (FT-IR), proton nuclear magnetic resonance (NMR), elemental analyses (EA), and mass spectra (MS). A series of bismaleimide-triazine (BT) resins were prepared from synthesized bismaleimide (DCPDBMI) and then cured with 2,6-dimethyl phenol-dicyclopentadiene dicyanate ester (DCPDCY) at various molar ratios. Thermal properties of cured BT resins (DCPDBMI/DCPDCY) were studied using dielectric analyzer (DEA), dynamic mechanical analyzer (DMA) and thermalgravimetric analyzer (TGA). These data were compared with that of commercial bismaleimide (DDMBMI) cured with bisphenol A dicyanate ester (BADCY). The cured DCPDBMI/DCPDCY exhibits lower dielectric constant, dissipation factor and moisture absorption than those of DDMBMI/BADCY. The effects of blend composition on the glass transition temperatures and thermal stability are discussed.     

电气绝缘材料的性能与发展

本文介绍了常用的固体绝缘材料的性能与作用，阐述固体绝缘材料的发展趋势。     

Unsteady radiative heat transfer within a suspension of ZnO particles undergoing thermal dissociation

An emitting, absorbing, and anisotropically scattering plain medium containing a suspension of ZnO particles is considered, in which the particles are directly exposed to high-flux irradiation and undergo shrinkage during their endothermic dissociation into Zn(g) and O₂ at above 2100 K. The unsteady energy equation that links the rate of radiative heat transfer to the rate of the chemical reaction is formulated and solved numerically by the finite volume technique and the explicit Euler time-integration scheme. The path-length Monte Carlo method is applied for modeling the radiative transfer within the suspension using the absorption/scattering coefficients and the scattering phase function obtained from the Mie theory. It is found that the particle suspension can be heated rapidly from its initial 300 K to over 1800 K in less than 0.1 s, resulting in a more uniform temperature profile as the reaction progresses, particles shrink, and the suspension becomes optically thinner. The chemical conversion increases with decreasing initial particle diameter and volume fraction due to the efficient radiative absorption.     

尖晶石粒度对高纯刚玉-尖晶石浇注料性能的影响

研究了尖晶石粒度对高纯刚玉 -尖晶石浇注料的抗折强度、抗热震性、抗侵蚀性等性能的影响。实验表明 :(1)随着配料中尖晶石颗粒含量的增加 ,试样的烧后强度呈先升高后降低趋势 (烘后强度变化不明显 ) ,烧后收缩减少 ,然后变为膨胀 ;(2 )尖晶石细粉与颗粒为 1:3的试样抗热震性较好 ;(3)对于高碱度渣 ,尖晶石颗粒加入量较多的试样抗侵蚀性较好 ;(4)对于低碱度渣 ,尖晶石细粉加入量较多的试样抗侵蚀性和抗渗透性均较好。     

连铸中间包绝热板用粘合剂研制

叙述了连铸中间包绝热板用粘合剂的合成方法，对其填充料的选择进行了分析，产品用于连铸中间包绝热板后，取得了较理想的效果。