基于时序特征的发电机转子故障诊断方法

提出了一种利用时序特征进行发电机转子的故障诊断方法.利用时间序列法中的AR或ARMA模型得到的脉冲传递函数的特点,并根据不同故障类别振动信号的格林函数变化的规律性,提出了利用格林函数的统计量特征作为故障诊断的特征参数进行故障诊断的方法.     

RED的网络性能研究*

在很多网络中, 支持新的拥塞避免机制( 如RED 和ECN) 的节点将会和支持传统丢尾缓存( Drop-Tail) 的节点共存。研究含有两个拥塞节点的混杂网络中TCP 流集的性能, 比较了几种控制算法的数据流公平性, 仿真结果显示采用Adaptive 算法并不能增加数据流的公平性; 仿真也显示混杂网络中单个RED 参数的设置情况会影响整个网络的性能, 具体可以从网络吞吐量、响应时间等判断。RED 的参数设置在双瓶颈情况下再次变得重要, 正如在单瓶颈的情况下一样。     

红外测温技术在离心复合铸造轧辊生产上的应用

本文分析了离心复合铸造轧辊生产过程中离心机停机温度和时间对轧辊质量的影响 ,提出了用先进的红外测温技术来预报停机温度和时间 ,以实现微机监控适时停机 ,保证轧辊内外层熔合良好 ;同时指出了红外测温技术在离心复合铸造轧辊生产上的应用前景     

Defect classification using a new feature for pulsed eddy current sensors

The objective of this study is to identify defects such as surface cracks, subsurface defects and metal losses using feature based pulsed eddy current sensors. A new feature, termed as the rising point, related to the propagation time of electromagnetic waves in metallic targets is proposed for defect classification. Experimental studies of the validation, robustness of the new feature of rising time are reported. In addition to other features, defects can be detected and quantified robustly and lift-off can also be derived from the rising time. Conclusion and further work are derived on the basis of the findings.     

Motion-based method for estimating time required to attach self-adhesive insulators

A self-adhesive insulator is a component of a home appliance that is used to suppress vibration or prevent humidity affecting the internal parts of the appliance. There is a wide range of types and designs available, allowing them to be applied to areas having different shapes. At the design stage, once an insulator design has been developed sufficiently to identify its dimensions and features, the attaching time and baseline cost must be estimated with reasonable accuracy to enable a comparison of vendor quotes. However, the current estimation method is not sufficiently accurate in terms of the baseline cost. This paper presents a motion-based time-estimating scheme with which the time required for the attachment of such insulators can be calculated more accurately. The scheme has been developed by analyzing the motions needed to attach 350 insulators and then designating representative motions and their time values. For this purpose, a modular arrangement of predetermined time standards (MODAPTS) is adopted. Motion-based time-estimation method is useful in terms of simplicity and accuracy. It enables design engineers to estimate the time required for the attachment based only on a drawing of the insulator and a few MODAPTS rules. Estimates made with this method should vary from the actual value by no more than 9.5%.     

Modeling time criticality of information

In this paper, we continue the research on formal treatment of attributes of information, based on the computational approach. In this scenario, the usefulness of advisory information is measured by the decrease in complexity of a problem we need to solve. We propose to model the time criticality via usefulness of a piece of information which is received during the computation. As a modeling tool, we use deterministic finite automata.     

Semantic weak signal tracing

The weak signal concept according to Ansoff has the aim to advance strategic early warning. It enables to predict the appearance of events in advance that are relevant for an organization. An example is to predict the appearance of a new and relevant technology for a research organization. Existing approaches detect weak signals based on an environmental scanning procedure that considers textual information from the internet. This is because about 80% of all data in the internet are textual information. The texts are processed by a specific clustering approach where clusters that represent weak signals are identified. In contrast to these related approaches, we propose a new methodology that investigates a sequence of clusters measured at successive points in time. This enables to trace the development of weak signals over time and thus, it enables to identify relevant weak signal developments for organization’s decision making in strategic early warning environment.     

Single frame correction of motion artifacts in PMD-based time of flight cameras

One of the leading time of flight imaging technologies for depth sensing is based on Photonic Mixer Devices (PMD). In PMD sensors each pixel samples the correlation between emitted and received light signals. Current PMD cameras compute eight correlation samples per pixel in four sequential stages to obtain depth with invariance to signal amplitude and offset variations. With motion, PMD pixels capture different depths at each stage. As a result, correlation samples are not coherent with a single depth, producing artifacts. We propose to detect and remove motion artifacts from a single frame taken by a PMD camera. The algorithm we propose is very fast, simple and can be easily included in camera hardware. We recover depth of each pixel by exploiting consistency of the correlation samples and local neighbors of the pixel. In addition, our method obtains the motion flow of occluding contours in the image from a single frame. The system has been validated in real scenes using a commercial low-cost PMD camera and high speed dynamics. In all cases our method produces accurate results and it highly reduces motion artifacts.     

ADHESION OF ELASTOMERS: DWELL TIME EFFECTS

The strength of adhesion of elastomers to rigid substrates generally increases with time of contact. This effect has been studied for samples of butyl and chlorobutyl rubber adhering to some rigid substrates. The peel strength increased continuously over long periods of contact until in some cases failure became cohesive within the elastomer layer. At higher temperatures the strength increased more rapidly, consistent with the WLF relation governing molecular motions. It is postulated that slow molecular rearrangements occur at the interface and increase the bond strength. A criterion for the observed transition from interfacial to cohesive failure is suggested.     

一种基于过零点的时延测量方法

信号传输时间（时延）的测量,是雷达、声纳系统的关键技术之一。本文研究了一种基于过零点的时延测量方法,在建立过零点搜索模型的基础上推导得出时延测量的测量结果表达式;定量分析了高斯白噪声条件下过零点时延测量的测量精度,得到测量误差的理论表达式。仿真与实验表明,过零点时延测量精度与信号频率、过零点数目、信噪比密切相关,当信噪比较高时,其测量精度与经典FFT法相当,而优势在于过零点时延测量的算法简单、计算量小,适用于对实时性要求较高的测量场合。