浦项开发35W270以上牌号无取向硅钢

钢中加Sn和Sb得到优良的磁性，铁损低和磁感高。与加B的比较，晶粒大，立方织构、高斯织构、（100）[uvw]纤维体积份数很高和γ-纤维体积份数很低，增加磁感的磁各向异性和降低铁损的磁各向异性。进行常化与未经常化的比较，最终晶粒大。（100）纤维份数：热轧板的最低，冷扎后变成最高。铁损的各向异性与织构因数之间成反比，磁感的各向异性与织构因数之问成正比。开发出了35W270-250高牌号无取向硅钢。     

Solubility of actinide surrogates in nuclear glasses

This paper discusses the results of a study of actinide surrogates in a nuclear borosilicate glass to understand the effect of processing conditions (temperature and oxidizing versus reducing conditions) on the solubility limits of these elements. The incorporation of cerium oxide, hafnium oxide, and neodymium oxide in this borosilicate glass was investigated. Cerium is a possible surrogate for tetravalent and trivalent actinides, hafnium for tetravalent actinides, and neodymium for trivalent actinides. The material homogeneity was studied by optical, scanning electron microscopy. Cerium L_III XANES spectroscopy showed that the Ce³⁺/Ce_total ratio increased from about 0.5 to 0.9 as the processing temperature increased from 1100 to 1400 °C. Cerium L_III XANES spectroscopy also confirmed that the increased Ce solubility in glasses melted under reducing conditions was due to complete reduction of all the cerium in the glass. The most significant results pointed out in the current study are that the solubility limits of the actinide surrogates increases with the processing temperature and that Ce³⁺ is shown to be more soluble than Ce⁴⁺ in this borosilicate glass.     

三辊穿孔和轧管所产生的钢管壁厚极差和波浪形内螺纹

定量描述了实际生产过程中三辊斜轧穿孔所产生的钢管壁厚极差和波浪形内螺纹，初步探讨了三辊轧管机对钢管壁厚极差和波浪形内螺纹的影响。     

Comments on Finley's "Critique of rational-emotive philosophy."

Reply to Finley's (1987; see record 1988-00015-001) critique of rational-emotive philosophy, which claims that Ellis's (1981) response to Sharkey's (1981) criticisms of rational-emotive psychology reveals logical and philosophical confusion. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

The Berlekamp-Massey Algorithm revisited

We propose a slight modification of the Berlekamp-Massey Algorithm for obtaining the minimal polynomial of a given linearly recurrent sequence. Such a modification enables to explain it in a simpler way and to adapt it to lazy evaluation. partially supported by the Galois Theory and Explicit Methods in Arithmetic Project HPRN-CT-2000-00114 partially supported by the European Union funded project RAAG CT-2001-00271     

控制W9Cr3Mo4V低倍碳化物剥落的工艺改进

针对W9Cr3M04V轧制成品材低倍碳化物剥落的形成原因分析，得出一次碳化物颗粒粗大、在1／4D至中心区域聚集是导致低倍热酸浸试验碳化物剥落的主因；由此进行冶炼过程中注速（锭形）、浇注温度选择对比工艺试验，得出在原有冶炼＋轧制的工艺基础上选用2．2t锭、降低浇注温度（1489℃）能有效改善一次碳化物颗粒大小和聚集程度，进而有效降低低倍碳化物剥落倾向。     

Formation Kinetics of Unsaturated (Ti, W)C Solid Solution

ＦｏｒｍａｔｉｏｎＫｉｎｅｔｉｃｓｏｆＵｎｓａｔｕｒａｔｅｄ（Ｔｉ，Ｗ）ＣＳｏｌｉｄＳｏｌｕｔｉｏｎＬｉｎＣｈｅｎ’ｇｕａｎｇ，ＤｅｎｇＦｅｎｇｘｉａｎｇ，ＨｅＣｏｎｇｘｕｎａｎｄＧａｏＺｈａｏｚｕ（林晨光）（邓凤翔）（贺从训）（高兆祖）（Ｇｅｎｅｒ...     

Recrystallisation of amorphous natural brannerite through annealing: The effect of radiation damage on the chemical durability of brannerite

An amorphous natural brannerite sample was chosen to study the annealing of the radiation damage through thermal recrystallisation, and subsequently to evaluate the effect of radiation damage on its aqueous durability. Microstructural characterisation of the natural brannerite revealed minor alteration along the rim of the crystal and within cracks. The formation of UO₂ particles and soluble Pb–Ca-rich aluminosilicate glass is responsible for the higher U and Pb releases from the recrystallised brannerite. In general, natural brannerite has been shown to be resistant to dissolution over geological time, therefore minor brannerite inclusions in ceramic formulations for immobilisation of actinide-rich radioactive wastes should not have a detrimental effect on the long-term chemical durability of the wasteforms.     

An efficient algorithm for characteristic tracking on two-dimensional triangular meshes

Tracking characteristics on unstructured meshes is an important part of many numerical methods in computational fluid mechanics. In this paper, we propose an efficient algorithm for characteristic tracking on two-dimensional unstructured triangular meshes. Numerical experiments, including an example for applying this algorithm with the Eulerian-Lagrangian localized adjoint method (ELLAM) to solve a convection-dominated convection-diffusion problem, are presented to demonstrate the efficiency of this algorithm.     

OPS和OPC系列稠油乳化降黏剂的研制

以工业品烷基酚聚氧乙烯醚OP-n（n=4,6,8,10,15）为起始原料,合成了烷基酚聚氧乙烯醚乙酸盐OPC-n和磺酸盐OPS-n两个系列的阴-非离子表面活性剂。以酸值和黏度不同的胜利单家寺和陈庄稠油为实验油样。将OPC-n和OPS-n溶于矿化度5811 mg/kg的胜利标准盐水和NaCl、CaCl2盐水中作为水相,按油、水质量比7∶3在50℃用玻棒搅拌混合,观察是否形成水包油乳状液并测黏度进行确认。在胜利标准盐水溶液中,OPC-n和OPS-n乳化稠油所需的最低质量分数,随稠油、表面活性剂类型及氧乙烯链节数n而变,一般而言,OPC-n系列中的OPC-8和OPS-n系列中的OPS-4乳化稠油的性能最好,该最低质量分数值分别为0.05%或0.025%和0.025%。在NaCl盐水溶液中,OPC-n的该最低质量分数值与稠油和n有关,均随盐含量增加而增大,在盐含量≤15%时,抗盐性最好的OPC-8和OPC-10的该值≤0.05%;OPS-n的抗盐性好于OPC-n。OPC-n的抗钙性良好,钙盐含量为2%时该最低质量分数≤0.1%;OPS-n的抗钙性更好,钙盐含量为2%和3%时该最低质量分数仅为0.025%或0.05%。表6参5。