洗车废水回用技术的研究应用进展

洗车废水含有油污，泥沙，表面活性剂及其他可溶性有机物。洗车废水处理回用技术因洗车规模大小不同存在很大差别。该文介绍了目前国内外大型洗车场废水处理回用的主要工艺，概括和比较了洗车点洗车废水回用装置的主要技术，分析了目前小型回用装置存在的问题，并对发展方向作了展望。     

Review of Operating Experience Of Ozone Systems In Municipal Plants In The United States

The treatment chemical ozone has now been successfully used in the United States in municipal water and wastewater plants for many years. To insure continuous, successful operations of these applications, operating obstacles had to be dealt with and overcome.

In this paper, examples of field operating problems and their solutions are described. The experiences at specific municipal water and wastewater installations are reviewed in detail. Discussed for each example are : the background and effects of the problem, the problem-solving process, and the eventual resolution of the problem. The examples include simple unit operations to entire processes.

By observing the ozone installation's operation several years after start-up, the design of future ozone systems can be improved and operating problems minimized.     

Recycling of ethylene propylene diene monomer (EPDM) waste. III. Processability of EPDM rubber compound containing ground EPDM vulcanizates

The rheological behavior of ethylene propylene diene monomer (EPDM) compounds containing ground EPDM waste (W‐EPDM) of known composition was studied by using a Monsanto processability tester in a temperature range of 90–110°C and a shear rate range of 306.7–1533.24 s^?1. It is found that the shear viscosity decreases slightly with increasing W‐EPDM loading because of wall slip that results from the migration of lubricants from the W‐EPDM. The addition of W‐EPDM to raw EPDM results in a decreased die swell at all temperatures and shear rates. SEM photomicrographs of the EPDM extrudate surface show improved surface smoothness and reduced extrudate distortion when EPDM is blended with W‐EPDM. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 87: 2204–2215, 2003     

再生剂与老化沥青微观作用机理

采用分子动力学模拟方法,根据老化沥青体系溶解度参数变化规律,研究了再生剂组分对老化沥青相容性的影响;通过体系的相互作用能分析,探讨了再生剂组分对老化沥青再生的作用机理。结果表明,芳香分有助于改善老化沥青的相容性,且芳香分掺量越大改善效果越好;饱和分则刚好相反,这与实验结论相一致。芳香分与老化沥青相互作用能随掺量增大而急剧增大,意味着两者相互吸引作用显著增强,其原因在于静电相互作用能占据主导地位,范德华相互作用能相对较小;然而饱和分与老化沥青的相互作用能随掺量变化不大,其中静电相互作用能和范德华相互作用能几乎各占一半贡献。分子间的静电相互作用能是影响老化沥青再生的主要因素。     

Ca—Mg系复合凝聚剂富集分离造纸法烟草薄片废水处理及资源化研究

采用制备的Ca—Mg系复合凝聚剂,对造纸法烟草薄片废水进行高效固-液分离,以大大降低后续生化处理负荷。获得的污泥固体富含烟碱类物质而进一步提取,用于生物源杀虫剂的活性成份;提取后的污泥固体用作粉状杀虫剂的载附剂,完全达到资源化利用。采用该法单级分离COD去除率可达到70％-80％,具有一定实用价值。     

冷再生结构层力学响应分析

通过研究冷再生结构层受力分析,在室内试验数据基础上,采用有限元BISAR软件对冷再生结构层以及常规半刚性路面结构层进行力学响应分析,得出了常规半刚性基层与冷再生基层力学响应的差异、冷再生层合理厚度、冷再生基层路面铣刨深度以及冷再生基层路面的使用条件.该研究对冷再生结构层设计与施工具有一定的借鉴作用.     

中水回用技术的发展及现状

介绍了中水回用的意义,一些常见的中水处理工艺,国内中水回用的应用实例.说明中水回用在我国有广阔的前景,推广中水回用技术有利于提高了水的重复利用率,节约了宝贵的水资源.     

Preparation of composite particles made from solid powders and wasted plastics by semichemical recycle method

Composite particles composed of solid powders and polymer were prepared by semichemical recycle of wasted plastics. Waste expanded polystyrene was used as raw materials of polymer matrix of composite particles. Both magnetite and silicon carbide powders were used as solid powders to give thermal and electric conductivity and magnetization, respectively. In the experiment, the oil‐phase dissolving expanded polystyrene was dispersed in fine droplets into the continuous water phase. Two kinds of powders were added at the same time or separately in the O/W dispersion. Composite particles were found to have the structure that polymer particle was covered with two kinds of solid powders. The mean diameter of composite particles and the content of each solid powder were strongly affected by the addition time when silicon carbide powder was added into the dispersion. Furthermore, it was found that the gradient adhesion layer due to two solid powders was able to be formed on the surface of polymer particle. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 88: 483–488, 2003     

关于加快我国石油和化学工业走循环经济之路的思考

论述了我国石油和化学工业“五大六低”的矛盾,即:产量大,企业数量大,职工队伍大,资源与能源消耗大,环境污染大;劳动生产率低,集约化程度低,科技含量低,石油和化学品性能低,市场应变能力低,经济效益低的矛盾。现状决定了石化工业必须加快循环经济的发展,提出了推动我国石油和化学工业走循环经济之路必须采取的对策和建议。     

Mechanical characterization and chemical resistances of cured unsaturated polyester resins modified with vinyl ester resins based on recycled poly(ethylene terephthalate)

Unsaturated polyester resin (UP) was prepared from glycolyzed oligomer of poly(ethylene terephthalate) (PET) waste based on diethylene glycol (DEG). New diacrylate and dimethacrylate vinyl ester resins prepared from glycolysis of PET with tetraethylene glycol were blended with UP to study the mechanical characteristics of the cured UP. The vinyl ester resins were used as crosslinking agents for unsaturated polyester resin diluted with styrene, using free‐radical initiator and accelerator. The mechanical properties of the cured UP resins were evaluated. The compressive properties of the cured UP/styrene resins in the presence of different vinyl ester concentrations were evaluated. Increasing the vinyl ester content led to a pronounced improvement in the compression strength. The chemical resistances of the cured resins were evaluated through hot water, solvents, acid, and alkali resistance measurements. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 103: 3175–3182, 2007