废旧轮胎综合利用现状简介

本文主要介绍了目前国内外废旧轮胎资源的综合利用情况，简要分析了我国废旧轮胎行业存在的问题并提出了相关措施。对我国发展循环经济，实施可持续发展战略具有重要的现实意义。     

Morphology and mechanical properties of polypropylene/high‐impact polystyrene blends from postconsumer plastic waste

The compatibilizing effect of the triblock copolymer poly(styrene‐b‐ethylene‐co‐butylene‐b‐styrene) (SEBS) on the morphological and mechanical properties of virgin and recycled polypropylene (PP)/high‐impact polystyrene (HIPS) blends was studied, with the properties optimized for rigid composite films. The components of the blend were obtained from municipal plastic waste, PP being acquired from mineral water bottles (PP_b) and HIPS from disposable cups. These materials were preground, washed only with water, dried with hot air, and ground again (PP_b) or agglutinated (HIPS). Blends with three different weight ratios of PP_b and HIPS (6:1, 6:2, and 6:3) were prepared, and three different concentrations of SEBS (5, 6, and 7 wt %) were used for investigations of its compatibilizing effect. Scanning electron microscopy showed that SEBS reduced the diameter of dispersed HIPS particles in the globular and fibril shapes and improved the adhesion between the disperse phase and the matrix. However, SEBS interactions with PP_b and HIPS influenced the mechanical properties of the compatibilized PP_b/HIPS/SEBS blends. An adequate composition of PP/HIPS, for both virgin and recycled blends, for applications in composite films with characteristics similar to those of synthetic paper was obtained with a minimal amount of SEBS and a maximal HIPS/PP ratio in the range of concentrations studied. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 88: 2861–2867, 2003     

Melt‐processable rubber: Chlorinated waste tire rubber‐filled polyvinyl chloride

Chlorinated ground rubber tire (Cl‐GRT) particles were used as filler in a plasticized polyvinylchloride (PVC) to develop a melt‐processable rubber composition. Physical properties of the Cl‐GRT‐filled PVC compound showed improvement compared to the nonchlorinated counterpart. Interaction between Cl‐GRT and PVC was examined on the basis of results of stress relaxation, dynamic mechanical thermal analysis, and solvent swelling studies. The Cl‐GRT could be loaded upto 40 parts per hundred parts of PVC, and the composition still retains the elastomeric characteristics. The Cl‐GRT‐filled composite was found to be reprocessable like the unfilled PVC compound. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 84: 622–631, 2002; DOI 10.1002/app.10352     

膜生物反应器在废水处理中的应用

膜生物反应器 (MembraneBio -Reactor ,MBR)是一种传统活性污泥法的改进技术 ,它应用于给水和废水处理的研究发展过程。介绍了膜生物反应器的发展状况、结构形式、优点和应用领域。     

废液晶显示器铟的资源化回收研究进展

液晶显示器(liquid crystal display,LCD)的回收处理是资源与环境领域的重要问题。介绍了LCD的组成成分并阐述了其对环境的潜在风险,综述了近年来国内外对废LCD中铟的资源化回收处理技术的研究现状,指出了目前该研究领域中存在的问题及后续的研究方向。     

Mechanochemical tuning of molecular weight distribution of styrene homopolymers as postpolymerization modification in solvent-free solid-state

Mechanochemical degradation by planetary ball milling (PM) is used for postpolymerization modification of styrene homopolymers (PS). A complete factorial design was chosen to study the effect of radical scavengers, milling time, initial molecular weight, and revolution radius (R_p), on the shape of molecular weight distributions (MWDs) of PS. Size-exclusion chromatography analysis shows the feasibility of fine-tuning MWD of PS at up to 40% conversion. Distributions ranged from unimodal to bimodal in a PM with R_p = 150 mm at different stage of milling, whereas in a PM with R_p of 60.8 mm the adjustment of unimodal distributions is achieved. Initial polydispersity is more important to develop bimodal distributions when compared with initial molecular weight. Fourier transform infrared and X-ray electron spectrometry analysis show some suppression of PS degradation and complete oxidation inhibition of macromolecular radicals with the incorporation of radical scavengers, which we considered as additional aids when adjusting the MWDs.     

Reinforcing effect of nanocrystalline cellulose and office waste paper fibers on mechanical and thermal properties of poly (lactic acid) composites

Nanocrystalline cellulose (NCC) was prepared from office waste paper (OWP) by sulfuric acid hydrolysis method in this paper and it was used to prepare a series of poly (lactic acid) PLA/NCC composites by using a dissolution method in solvent N, N-dimethylformamide solution. The results indicated that with the addition of only 3 wt% NCC, the composites exhibited outstanding mechanical property. The tensile, bending and impact properties of the PLA/3NCC composite were improved by 8.2%, 13.1%, and 35.9% than those of pure PLA, respectively. On this basis, office waste paper fibers (OWF) were also used as a physical blended filler to enhance PLA/NCC composites to reduce the preparation cost of PLA composites and the perfect PLA/NCC/OWF sample was easily manufactured by melting–blending and injection molding. According to the crystallization and melting performance table, both NCC and OWF can act as nucleating agent to promote the crystallization properties on composites, while the blends did not have positive effect on thermal stability. Furthermore, the water absorption and degradation properties of PLA composites were also studied. This work not only provided a novel idea for the utilization of office waste paper but also successfully produced environment friendly composites with favorable mechanical properties and crystallization performance.     

Fine grinding of thermoplastics by high speed friction grinding assisted by guar gum

High speed friction grinding has been used to grind plant and food substances in water but never been explored for grinding of thermoplastics like polylactic acid (PLA), low and high density polyethylene and polypropylene. Such grinding was investigated in this work and was made possible by using 0.5% guar gum solution instead of just water because increasing the viscosity of water reduced their settling and the speed of passing through the grinder. Tensile, flexural, and impact strengths of the plastics were studied and higher grinding efficiency of PLA could be explained by its low elongation-at-break compared to low density polyethylene, high density polyethylene, and polypropylene. The microplastics (2000–45 μm) were studied for mass and particle size distributions and by scanning electron microscopy, ¹³C CP/MAS NMR, Fourier transform infrared spectroscopy, differential scanning calorimetry, and thermogravimetric analysis. In addition, viscosity of guar gum and contact angles was measured. This new technology can produce finely ground microplastics (710–45 μm) for a variety of applications.     

Upcycling by grafting onto semi-crystalline polymers using supercritical CO2

The creation of graft copolymers by selectively grafting a second polymer to the amorphous fraction of a semi-crystalline polymer in supercritical CO₂ is demonstrated herein. The graft copolymer is synthesized by free radical polymerization of a vinyl monomer within the semi-crystalline polymer below its melt temperature. Such conditions afford selective grafting on the amorphous regions (block “B”) while leaving the crystalline domains (block “A”) unmodified. Accordingly, unique A-B, A-B-A, A-B-A-B-A, and so forth. block structures are formed. In this work, styrene is polymerized within polyamide 6, polyethylene terephthalate, and isotactic polypropylene. Purification of these material is performed to remove the un-grafted homopolymer, allowing for determination of the graft yield, the portion of polymer which covalently bonds to the semi-crystalline matrix. Grafting yields achieved in polyamide 6, polyethylene terephthalate, and isotactic polypropylene were 98%, 59%, and 15%, respectively. Property enhancements were observed upon further characterization of polystyrene-polyamide 6 copolymers, including high glass transition temperatures, the ability to be remelted, and tunable grafting molecular weight. Additionally, hydrophobicity is controlled by varying polystyrene composition. The remarkable range of accessed properties demonstrates this as a potential route to upcycling plastics.     

A study on melt recycling of bio-based polypropylene/thermoplastic starch compound

The compulsion to use bioplastics has increased significantly today. One of the important aspects of plastics is their recyclability. Therefore, the important question of this research is that although bio-based compounds containing starch are sensitive to thermal-mechanical recycling processes, are such products thermally recyclable? To answer the question, polypropylene (PP)/thermoplastic starch (TPS) compound granules were extruded up to five times, and in the other part, single-extruded granules were blended at different ratios with virgin granules by extrusion. In order to characterize these samples, Fourier transform infrared spectroscopy, thermogravimetric analysis, differential scanning calorimetry, rotational disc rheometry, tensile properties, and appearance evaluation were used. The results showed that it is possible to recycle PP/TPS granules up to four times repetition of the extrusion operation and the fifth repetition also showed slight changes. There was also a blend of single-extruded granules with virgin material up to a 50:50% composition without significant variation.