基于MPLS的VPN互访技术

针对VPN互访问题,根据IPSec-VPN互访方法的不足,提出动态MPLS-VPN方法.利用随机分配的标签,在需要互访的不同VPN网络节点之间构建MPLS通道,利用互访规则集检验节点的连接申请,根据过滤规则控制数据包的传输,通过设定传输时长限制节点互访的时间,实现VPN之间接节点、按方向、按时间的细粒度互访控制,确保数据传输的安全性和高效性.给出动态MPLS-VPN方法实现互访的步骤,对方法进行分析比较.     

用闪锌矿(方铅矿)精矿催化还原软锰矿(大洋锰结核矿)制取硫酸锰

在稀硫酸(或稀盐酸)溶液中，用闪锌矿(或方铅矿)精矿作还原剂，用可溶性铁盐作催化剂，分解软锰矿(或大洋锰结核矿)，同时制取锰盐和锌盐。该工艺具有反应快速、彻底，工艺流程简单等特点，同时省去了软锰矿的还原焙烧和锌(铅)精矿的氧化焙烧，能够大幅度提高锰、锌(铅)矿的浸出率，对原料矿的品级没有严格要求。     

开放水热法制备莫来石复相纳米晶体的影响因素

以天然高岭土为原料,经精细化处理煅烧制备莫来石.用常压、开放水热技术制备出莫来石复相纳米晶体材料.实验表明:常压、开放水热条件下制备莫来石复相纳米晶粉体的水热反应中,采用质量比为m(Na2O)/m(SiO2)=2.8,m(H2O)/m(Na2O)=35～30,0～80℃控温升温1 h,在80℃保温2 h,可制备出尺寸为80～100 nm莫来石复相纳米晶体.所制备的莫来石纳米晶体的水热溶液相变驱动力△μ为(3.609～4.672)×10-20 J/mol;水热体系溶解度控制在3.891×10-6 mol/L;熔解热△E为18.846 kJ/mol;晶体生长速率常数选择0.85～0.92,有利于快速成核和晶体生长,并且可以很好地控制晶体尺寸和分散度.     

米糠-硫酸直接浸锰工艺条件研究

以米糠及湘西软锰矿为原料,对米糠-硫酸直接浸锰制备硫酸锰的工艺条件进行了研究。结果表明,米糠-硫酸法浸锰的最佳工艺条件为:浸锰温度250℃,硫酸质量分数50%,浸锰时间75min,米糠用量为软锰矿粉质量的20%,硫酸用量为其理论用量的110%。按该工艺条件浸锰,锰的浸出率可达95%以上。该工艺具有能耗少、生产成本低、锰的浸出率高等优点,为软锰矿的开发利用开辟了一条新途径。     

纤维取向的研究进展及应用

主要阐述了短切纤维增强复合材料的纤维取向的广泛应用及其研究进展；简单描述了纤维取向的计算方法以及对于纤维取向在各个方面的概述；展望了纤维取向在塑料工业的应用。     

Calibration for measured crystal size distribution

The crystal size distribution (CSD) measured by laser diffraction technique is obtained by assuming spherical crystals. If crystals are non-spheres, calibration is responsible for the true crystal size, particle number concentration and population density. In this paper, CSD calibration equations have been deduced. It was shown that when shape factors are size-independent, the weight percent of particles is not affected by crystal shape and calibration is just a horizontal shift of measured CSD. Calibration was taken for plate-like crystals of cefazolin sodium and rod-like crystals of l-threonine. The effect of CSD calibration on crystal growth kinetics has been investigated in l-threonine-water evaporation crystallization system.     

活性炭纤维处理油田回注水的可行性

目前我国油田以向油层注水保持油层压力来提高原油采收率为主要采油手段，所注水98％都是经处理达标后的油田采出水。活性炭纤维（ACF）是一种新型高效吸附材料，孔径分布窄，比表面积大，再生条件温和，并可以根据处理吸附物质的大小调整ACF的孔隙大小，使其作为精细过滤材料处理油田回注水具有可行性，可实现吸附和过滤同时进行，提高注水水质。     

Natural rubber–ethylene‐propylene‐diene rubber covulcanization: Effect of reinforcing fillers

Filled covulcanizates of elastomer blend comprising natural rubber (NR) and ethylene‐propylene‐diene rubber (EPDM) of commercial importance were successfully prepared by using a multifunctional rubber additive; namely, bis(diisopropyl)thiophosphoryl disulfide (DIPDIS). A Two‐stage vulcanization technique further improved the physicochemical properties of the blend vulcanizates by restricting, through the formation of polar rubber bound intermediates, the migration of curative and filler from lower to highly unsaturated rubber. Scanning electron microscopy studies indicate homogeneity and coherency in the morphology of the two‐stage vulcanizates. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 84: 1001–1010, 2002; DOI 10.1002/app.10361     

Effect of ortho- and pyrophosphates on dissolution of Fe,Al, Si,Ca, and organic C in three soils

Phosphate application changes chemical properties of surface soils, consequently influencing crop nutrient availability and pedological process. Sodium ortho- (OP) or pyrophosphate (PP) was equilibrated with three Quebec soils: an Uplands sand (Orthic-Podzol), a St. Bernard loam (Eutric-Cambisol), and a Dalhousie clay (Humic Gleysol) in 0.03 M KClO₄ solution at an initial pH 6.0. Both autoclaved and nonautoclaved soils were used, and dissolution of Fe, Al, Si, Ca and organic C was studied.Concentrations of Fe and Al in OP equilibrated solutions were not detectable. Ca solubility was reduced while dissolution of Si and organic C was increased in the presence of OP. These changes were possibly due to P—Ca precipitates or increased Ca sorption by P, and competition between OP and Si or organic materials for sorption sites. PP enhanced dissolution of Fe, Al, Si and organic C but reduced solubility of Ca. Comparisons showed that PP added to autoclaved soils had greater effects on increasing dissolutions of Fe, Al, Si and organic C and on reducing Ca solubility than OP in both autoclaved and nonautoclaved soils. Autoclaving resulted in greater dissolution of organic C. Dissolved Si with added OP was greater with nonautoclaved soils probably due to more P sorption in the nonautoclaved system, compared with autoclaved soil. Added PP dissolved Fe and Al ions which may ultimately enhance P precipitation by forming less soluble compounds upon hydrolysis of PP to OP.     

基于集成温度传感器的硅微陀螺仪数字化温度补偿研究

提出了一种基于集成温度传感器的硅微陀螺仪数字化温度补偿方法。首先,介绍了集成温度传感器的硅微陀螺仪基本结构原理,分析了硅微陀螺仪动力学方程以及温度变化对硅微陀螺仪谐振频率、品质因数、标度因数和零偏的影响。然后,设计了基于FPGA的硅微陀螺仪数字化补偿电路。最后,经过温度特性实验得到标度因数和零偏随温度变化曲线,建立了温度补偿模型,提出分段温度补偿方法。经过温度补偿后,标度因数和零偏的温度系数分别由316.66×10-6/℃和366.22°/(h·℃)减小为69.67×10-6/℃和115.25°/(h·℃),证明了补偿方法的正确性和可行性。