化学还原法制备导电涂料用片状超细铜粉的研究

以CuSO4·5H2 O为原料 ,抗坏血酸为还原剂 ,NH3 ·H2 O为络合剂 ,将络合剂在反应温度加到CuSO4·5H2 O溶液中 ,再加入还原剂 ,制备了粒径分布为 1～ 10 μm的片状铜粉。探索与分析NH3 ·H2 O的用量、反应温度和CuSO4浓度对铜粉形貌及产率的影响。结果表明 :络合剂的使用是制备片状超细铜粉的关键 ,其与Cu2 + 形成络合物 ,减少溶液中游离Cu2 + 的浓度 ,控制铜的生成速度 ,并影响铜的成核和生长 ,最终形成片状铜粉。     

海洋生物及其粘附机理——藤壶、帽贝、海葵、管栖蠕虫

主要介绍海洋生物中藤壶、帽贝、海葵、管栖蠕虫对其基材的粘附机理。这对于人体生物胶粘剂的研制开发和海洋环境中的防污行业意义重大。     

Photoelastic Studies on Rubber-to-Rubber Joints

Photoelasticity is a method which yields information on the principal stress difference and orientation in a composite structure. Various problems associated with this technique, especially those concerning the fundamental relationship between the fringe order and the stress, have yet to be investigated. A few studies of this relationship in a universal stress state have been presented, particularly in the field of rubber-to-metal and rubber-to-fabric composites, but no evaluations have so far been made in the field of rubber-to-rubber joints. Applying the photoelastic method, we report our observations on the stress distribution in a natural rubber to natural rubber joint subjected to uniaxial tension. A comparison between the results of experimental photoelastic studies and the corresponding computer modelling has been illustrated. The theoretical displacement pattern of the angular joints of bi-rubber part has also been highlighted.     

火焰原子吸收光谱法测定高纯石英粉中痕量钙

系统地研究了用空气——乙炔火焰原子吸收光谱分析法测定高纯石英粉中钙的最佳条件，建立了14％的乙醇作为增感剂，在2％盐酸介质中，0．4％ LaCl3溶液作为释放剂，用塞曼火焰原子吸收法测定的可行性方案，探讨了共存元素对钙的干扰及其消除。方法操作简便快速，干扰少，方法相对标准偏差小于3％，适用于日常分析石英粉中的杂质。     

Zinc Coated Steel/Epoxy Adhesive Systems: Investigation of the Interfacial Zone by FTIR Spectroscopy

The present study takes advantage of the ability of Fourier Transform Infrared Spectroscopy (FTIR) for the analysis of ultrathin organic films on metals. FTIR in the reflection mode (IRRAS) is used in order to study the interaction of ultrathin films of dicyandiamide (hardener of most one-pack epoxy resins) with various substrates, model ones such as gold or zinc and industrial ones such as steel and zinc-coated steels.

Pure zinc surfaces and, to a lesser extent, zinc-coated steels are shown to react with dicyandiamide after heating at 180°C, as evidenced by the frequency shift of the absorption band (at about 2200 cm^-1) characteristic for nitrile groups. As real systems consist of thick layers of a fully formulated adhesive cured onto a metallic substrate, the direct investigation of such a buried interphase is no longer possible by FTIR and by most of the known spectroscopies. Some mechanically tested specimens are then analysed, after failure, by FTIR microspectrometry. The spectra obtained, corresponding to the fracture initiation zone which is about 100 μm in diameter, advocate for the presence of an ultrathin layer of modified polymer still covering the substrate.     

采用“两级跳间隙镀”电源的无氰碱铜工艺研究

回顾了对无氰碱铜研究历史中的经验教训。在大量试验基础上，提出了一种706无氰碱铜工艺。对配位剂的恰当选择、组合及工艺条件控制，能将临界活化电流密度降得很小，使钢铁件上能在宽JK范围内直接预镀铜而取得良好结合力。用开发的“冲击镀加间隙镀两级跳自动电源”，更有利于提高结合力及提高抗阴阳离子杂质影响能力。加入适量硝酸钾能降低液温并提高允许JK，有利于无氰加厚镀铜及复杂管件装饰镀。     

新型无污染融雪/冰剂的合成及应用评价

以天然矿石和乙酸为原料 ,采用正交试验法进行了新型无污染融雪 /冰剂的合成工艺研究 ,确定最适宜工艺条件为 :矿石与乙酸溶液的质量比为 1.2 ,乙酸浓度为 2 .6mol/L ,反应温度为 80℃ ,反应时间为 4～ 6h。介绍了新型融雪 /冰剂的机理、效果、对环境的影响 ,以及腐蚀性与毒性     

成核剂对聚丙烯辐照交联行为的影响

系统研究了聚丙烯的辐照交联行为,证明加有成核剂的聚丙烯辐照稳定性好,容易制成性能优异的辐照交联聚丙烯。根据此研究结果,发明了“高性能辐照交联聚丙烯的制备”这一专利技术。此技术在化工、建筑等方面均有广泛的应用前景。     

聚氯乙烯引发剂的特性和应用

简述不同相态类别，不同活性类别和不同结构类别的聚氯乙烯引发剂的一般特点，对国内聚氯乙类引发剂的开发与应用有参考价值。     

Ambient‐cured polyesteramide‐based anticorrosive coatings from linseed oil—A sustainable resource

Ambient‐cured polyesteramide (APEA) coating resin synthesized from dihydroxy fatty amide obtained from linseed oil, a sustainable resource, and poly(styrene‐co‐maleic anhydride), a bifunctional acid component, was found to exhibit improved physicomechanical and anticorrosive properties. The structural elucidation of APEA resin has been carried out by FTIR, ¹H‐NMR, and ¹³C‐NMR spectroscopies. The physicomechanical and chemical resistance properties were investigated by standard methods. The corrosion resistance performance was evaluated in acid, alkali, and organic solvent. The thermal behavior was studied by TGA technique. A comparative study of these properties of APEA with reported baked polyesteramide (PEA) coatings was carried out. A remarkable improvement in the drying property of APEA was observed. The APEA coatings also showed improved physicomechanical and anticorrosive properties as compared to the baked PEA coatings. © 2005 Wiley Periodicals, Inc. J Appl Polym Sci 97: 1818–1824, 2005