收尽铁路油槽车底油的措施

介绍了造成铁路油槽车底油收不尽的原因，一是节约意识差；二是设备设施陈旧或维护不够；三是操作不当。提出了增强节约意识，挖掘设备潜力，采用合理的吸油方法的对策。     

Phase-change thermal energy storage using spherical capsules: performance of a test plant

The aim of this paper is the study of an industrial process of energy storage usable for air conditioning or refrigeration, investigating a test plant which is a tank with a reduced size, filled with randomly dispersed commercial nodules, placed in a refrigeration loop. The nodules are spherical capsules in which phase change materials (PCM) are encapsulated. This test plant permits the study at length of the behaviour of the tank with, in particular, the charge mode taking into account the undercooling and the discharge mode. A simulation program that considers aspects of both the surrounding heat transfer fluid and the phase-change material packed inside the nodules is developed here in the cases of the charge and the discharge processes. The simulation results are then compared with experimental observations.     

油罐常用安全附件的维护与保养

目前油田使用的各式储罐基本上可分为钢制拱顶地上油罐和单盘式外浮顶储油罐两大类。这些储罐在日常运行和维护保养中的操作比较繁琐,带来的安全隐患也比较多,尤其是油罐安全附件的安全运行、检查、维护与保养,都关系到油区的日常安全生产。文章从日常运行管理方面,探讨了日常使用的油罐安全附件的日常运行、安检、维护和保养方法。     

EFFECT OF SUSPENDED FIBRES ON MACRO-MIXING AND MICRO-MIXING IN A STIRRED TANK REACTOR

The effects of suspended fibre on macroscale and microscale mixing in a small stirred tank reactor were studied under batch conditions using the competitive, consecutive azo coupling between 1-naphthol and diazotized sulfanilic acid. The mixing quality was determined from the distribution between the mono and bis substituted reaction products. Nylon (2 and 3 millimeters in length) and fully bleached softwood kraft pulp (FBK) fibre suspensions were examined at volumetric concentrations up to the limit that complete suspension motion could be maintained in the vessel at impellet rotational speeds of 7 and 10s^-1. The adsorption of the product dyes on the fibre was found to be proportional or very nearly proportional to their concentrations in the aqueous phase and did not interfere with the assessment of mixing in the suspension.

Suspended fibres were found to slightly increase the 'critical feed time' of the diazotized sulfanilic acid, corresponding to an increase in the macromixing or bulk blend lime of the vessel. Continued increase in the fibre concentration led to the formation of a well mixed cavern centered on the impeller and the creation of stagnant regions adjacent to the vessel walls. The departure from the Newtonian fibre-free case is due to changes in the flow through and distribution of the energy dissipative regions in the vessel. The most effective location for chemical addition to ensure good microscale mixing remains in the impeller vicinity.     

改进马蹄焰玻璃窑炉加料口设计的体会

我厂总结加料实际运行情况,分析加料口对配合料熔化作业的影响,在仍采用一台(嘴宽为800mm)毯式推料加料机情况下,对24m~2的马蹄焰熔炉加料口结构进行了改进,取得了较好的效果。     

软土地基油罐底板变形分析

分析了造成油罐底板变形的原因、形式及其危害，结合工程实例，提出了减少油罐底板不均匀变形的措施。     

MOBILIZATION OF SLUDGE IN HORIZONTAL CYLINDRICAL TANKS WITH SUBMERGED NOZZLES

Over 378,000 m³ (100 million gal) of radioactive waste is being stored in hundreds of tanks at several U.S. Department of Energy (DOE) sites. The environment within the tanks is highly radioactive and chemically harsh. The waste typically consists of a heterogeneous sludge layer covered by a layer of supernatant. A few of the tanks have leaked to the environment, while others are corroding. Removing the waste from the tanks and processing it to a stable final form are desired to prevent any additional contamination of the environment. The tanks vary in size and geometric shape and do not have systems for removing the sludge waste.

Mobilization and mixing studies were conducted with a surrogate sludge (e.g., kaolin clay) using submerged jets in two sizes of horizontal tanks with nominal capacities of 0.87 m³ (230 gal) and 95 m³ (25,000 gal). Mobilization efficiencies and mixing times were determined for single and bidirectional jets in both tanks with the discharge nozzles positioned at various locations in the tanks. Approximately 80% of the surrogate sludge was mobilized in the 95-m³ tank using a fixed bidirectional jet (inside diameter = 0.035 m) and a jet velocity of 6.4m/s (21 ft/s). The effective cleaning length, which is defined as the distance between the jet and the edge of the remaining sludge bank, was approximately 3.2 m (10 ft) on each side of the bidirectional jet.     

基于FLUENT振荡浮子式波浪能转换装置浮子的数值仿真

基于VOF模型,运用三种不同的造波方法建立了二维数值波浪水槽,并对其进行了比较,选取了在特定波况下较为合适的数值水槽。基于该数值波浪水槽,考察了波浪作用下的运动状态以及受力状态,为波能转换器的设计提供指导。     

3-D hydrodynamics generated in a stirred vessel by a multiple-propeller system

The aim of this study is to optimize the position and the number of propellers in a non-standard tall vessel. Laser sheet flow visualization experiments were carried out for selected geometrical arrangements which produced stable flow patterns and good transport between the propellers. Four double-propeller arrangements corresponding to frequent industrial cases and a three-propeller system have been chosen. Comparison of LDA measurements in the r-z plane, dimensionless global parameters N_Qp, Nt_m, N_p, E_p and spatial distribution of local energy dissipation rate ? shows that a three-propeller system is the most efficient.     

液氨贮存设计分析

氨是生产含氮肥料及尿素的基本原料，为确保原料供应，必须设置其贮存设施。介绍了常温中压、降温低压和低温常压三种不同的液氨贮存工艺及其特点，并以某大型氨站设计为例，分析了液氨贮存工艺流程、主要设备、材料的选型和工艺参数的确定。