"摩圣"技术在空气压缩机上的应用

介绍了4L-20/8型空气压缩机采用"摩圣"技术后的运行情况。"摩圣"技术在设备正常运行条件下能成功修复摩擦副的磨损,使之恢复原设计的尺寸和要求,因而提高了生产效率,取得了显著的经济效益。     

Impairment of long-term associative memory in aging snails (Lymnaea stagnalis).

Age-dependent impairment in learning and memory functions occurs in many animal species, including humans. Although cell death contributes to age-related cognitive impairment in pathological forms of aging, learning and memory deficiencies develop with age even without substantial cell death. The molecular and cellular basis of this biological aging process is not well understood but seems to involve a decline in the aging brain's capacity for experience-dependent plasticity. To aid in resolving this issue, we used a simple snail appetitive classical conditioning paradigm in which the underlying molecular, cellular, and neural network functions can be directly linked to age-associated learning and memory performance (i.e., the Lymnaea stagnalis feeding system). Our results indicate that age does not affect the acquisition of appetitive memory but that retention and/or consolidation of long-term memory become progressively impaired with advancing age. The latter phenomenon correlates with declining electrophysiological excitability in key neurons controlling the feeding behavior. Together, these results present the Lymnaea feeding system as a powerful paradigm for investigations of cellular and molecular foundations of biological aging in the brain. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

板式换热器在中小高炉炉体冷却中的应用探讨

中小高炉炉体软水冷却采用的空冷器冷却效果随季节变化而波动，夏天时最高进高炉水温达到70℃以上，影响了高炉的安全高产和使用寿命。板式换热器以波纹板为传热面，传热系数高、体积小、拆装清洗方便，换热强度高，换热效果好，根据中小高炉炉体冷却软水系统流量大、温差小等特点，宜选用316或316L不锈钢材质、结构矮胖型、开二备一、3台并联的板式换热器。济钢2^#355m^3高炉采用BR1．IXC(1．0／100)200．2型水-水板式换热器，软化水进高炉温度全年稳定在34～39℃。     

小型别墅中央空调的新风设计

提出了小型别墅中央空调新风处理的方法，就某别墅采用本方法作中央空调新风设计，并以其计算数据为依据，验证了本方法的可行性。     

主战坦克进气系统随车无损检测

简要地介绍了主战坦克进气系统的重要性及无损检测的必要性,在分析总结台架试验过程和国内外主战坦克进气系统随车无损检查的基础上,提出了今后无损检查的改进方向,利用光电技术及时对质量浓度和颗粒尺寸分布报警的检测系统。     

钢坯修磨金属切除率数学模型的研究

从分析修磨过程运动学和单个磨粒切削入手,建立了磨削深度与磨削过程诸参数(如工艺、材料性能、砂轮性能等)的关系表达式,从而建立起金属切除率与各单项参数的定量关系,为改善或提高修磨效率和修磨过程控制提供了有意义的根据。理论分析与实验结果吻合良好。     

码分多址（CDMA）技术和公用空中接口综述

本文主要讨论数字移动通信中扩频码分多址技术，阐明了ＣＤＭＡ体制的优越之外，分析了ＣＤＭＡ的关键技术，全面介绍了ＣＤＭＡ系统设计的基本原则和ＩＳ－９５－Ａ空中接口标准的含义。     

Design and Characterization of the CLIMPAQ,Chamber for Laboratory Investigations of Materials,Pollution and Air Quality*

A test chamber has been developed in order to provide a small and simple emission testing facility capable of testing construction products in a climate where the important climatic parameters such as temperature, ventilation rate and air velocity can be varied independently around typical indoor values. The test chamber CLIMPAQ is made of panes of window glass. Other main surface materials are stainless steel and eloxated aluminium. The chamber has a volume of 50.9 litres and is designed to meet the requirements for quantifying air pollution. In this investigation human subjects acted as air pollution judges, and chemical characterization of the air pollution was carried out. Carpet, linoleum, wall paint and seal- ant were tested simultaneously in the CLIMPAQ and in four other chambers ranging from a full-scale chamber of 28 m³ to a field and laboratory emission cell of 3.5· 10^?5m³. Product ranking is the same in all chambers for the sensory measurements. Emission rates based on sensory measurements differ for all products less than 100 % except for tests in a 3-litre chamber where emission rates were higher. Chemical measurements differ up to approximately 10 times for the same product in different chambers. Deviations appear to be the result of different environmental parameters in the various chambers. Low air concentrations or high specific ventilation rates seem to increase emissions, while differences in air velocities and sink properties may also be the cause of differences in emission rates.     

用发生炉煤气进行快速热风烤窑的应用

用发生炉煤气进行快速热风烤窑的应用王善波，王志军（山东荣成市玻搪工程有限公司２６４３０９）ＰｒｏｄｕｃｅｒＧａｓＵｓｅｄｆｏｒＦａｓｔＨｅａｔｉｎｇｕｐＴａｎｋＦｕｒｎａｃｅ￥ＷａｎｇＳｈａｎｂｏ；ＷａｎｇＺｈｉｊｕｎ（ＳｈａｎｄｏｎｇＲｏｎｇｃｈｅ...     

大泵站超驼峰水位运行压缩空气断流系统的设计方法

阐述了压缩空气断流的原理，提出了压缩空气断流装置的一般构成和设计方法，首次应用气体喷射器作为压缩空气减压增量变换器，不但及时地增加了补气量，防止断流后流道压力的下降，而且大大减小了储气罐容积，使该项技术得以满足工程实际的要求，为同类泵站的技术改造