La在KCl-NaCl和LaCl_3-KCl-NaCl熔体中的溶解行为SCIEI

本文利用透明槽技术、电化学循环V-A法及量子化学EHMO三种方法,研究了La在KCl-NaCl(1:1mol)及LaCl_3-KCl-NaCl熔体中的溶解行为。初步认为:溶解在KCl-NaCl熔体中的La是以中性金属状态存在。在LaCl_3-KCl-NaCl熔体中,溶解的La与La^(3+)作用生成低价La^(2+)离子,La^(2+)又与周围的La^(3+)作用形成原子簇离子La_m^(n+)赋存于熔体之中。     

高频焊管用464-H14铝复合带材力学性能的研究

结合工业生产研究了高频焊管用464－H14铝合金复合带材的退火工艺和加工工艺对材料力学性能的影响。结果表明：成品材料冷轧前的软化退火温度应选择在既能使材料完全软化而又不发生Si原子扩散的350－400℃之间，冷加工率应控制在20％－40％，这样可使材料获得较好的力学性能，能够满足产品的技术标准和使用要求。     

铝电解槽TiB2涂层阴极技术

将含有ＴｉＢ２、碳纤维和热固性粘结剂的涂料，涂敷到铝电解槽的阴极基体上，制备出可润湿的阴极表面。经固化和碳化后，涂层和碳质基体材料的粘结力强，热膨胀匹配性好。每台硼化钛涂层阴极试验槽能节省ＮａＦ２５０～３００ｋｇ，试验槽的电流效率高出对比槽１．４４％，能耗降低１７５～２１１ｋＷ·ｈ／ｔＡ     

3003铝合金热变形流变应力特征

采用Gleeble-1500热模拟机进行圆柱体压缩实验．研究了3003铝合金在变形温度为300～500℃、应变速率为0．01～10s^-1、真应变为0～0．8条件下的流变应力特征。结果表明．流变应力随温度升高而降低，随应变速率的提高而增大；在应变速率小于10s^-1。时，3003铝合金首先出现加工硬化，流变应力达到峰值后单调下降，趋于平稳，表现出动态回复的特征；而在应变速率为10s^-1、变形温度在350℃以上时，合金发生了局部动态再结晶；可用Zener-Hollomon参数的双曲正弦形式来描述3003铝合金热压缩变形时的流变应力行为。     

Diffusion of additives and plasticizers in poly(vinyl chloride): 4. A programmed temperature technique for the determination of the diffusion parameters of three dialkylphthalates

A programmed temperature technique has been developed for the measurement of the self-diffusion coefficients of additives in polymers. This has been applied to the diffusion of three dialkylphthalate plasticizers in poly(vinyl chloride). Values of the self-diffusion coefficients and the calculated activation energies obtained in this way have been compared with values previously obtained from measurements at constant temperature. It has been shown that the programmed temperature technique gives a very rapid method for the estimation of the activation energy of self-diffusion.     

釉上金红颜料的研制

采用液相反应法研制了釉上金红颜料，给出了颜料和熔剂配方及其制备方法。     

补强剂和共混工艺对PA/PVC/NBR三元共混弹性体性能的影响

在选择三元共聚尼龙（PA）、聚氯乙烯（PVC）、丁腈橡胶（NBR）为主体材料，制备PA／PVC／NBR（10／30／60）三元共混弹性体的工作基础上，进一步探讨了填料品种和用量，共混温度，加料顺序等因素PA／PVC／NBR三元共混弹性体的影响。试验结果表明：在PA／PVC／NBR（10／30／60）共混体系中，补强型填料的补强效果优于非补强型的填料，6种填料补强效果依次是：快压出炭黑＞半补强炭黑＞白炭黑＞活性重质，CaCO3＞陶土＞滑石粉，快压出炭黑的适宜用量是20－50份。在制备PA／PVC／NBR三元共混物时，适宜的共混温度是122－140℃，并且采用二段法混工艺制得的共混物性能优于采用一段法共混工艺。     

Structural changes and mechanical performance of recycled poly(vinyl chloride) bottles exposed to ultraviolet light at 313 nm

The structural changes and mechanical performance of virgin poly(vinyl chloride) (PVC) bottle (VB) compounds blended with postconsumer PVC bottles collected from a specified factory (RB‐F) and houses (RB‐H), were examined before and after UV irradiation at 313‐nm UV wavelength for different periods of time up to 28 days. The results indicated that, when exposed to UV light, the RB‐F/VB blends containing greater conjugated double bonds with higher yellowness index appeared to exhibit better mechanical performance than that of the RB‐H/VB blends. It was found that the amount of conjugated double bonds was not a linear function of the discoloration level of PVC compounds. Tensile strength of the VB compounds was not affected when incorporated with RB‐F recyclate, but progressively decreased with increasing RB‐H recyclate. An optimum concentration for RB recyclates to be added into the virgin compound was recommended for obtaining a maximum impact strength. Both tensile and impact strengths decreased with increasing UV exposure time, a severe degradation being obvious after a UV exposure time of 21 days. Hardness was not affected significantly by the addition of PVC recyclate, but increased with increasing UV exposure time. © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 92: 84–94, 2004     

聚氯乙烯引发剂的特性和应用

简述不同相态类别，不同活性类别和不同结构类别的聚氯乙烯引发剂的一般特点，对国内聚氯乙类引发剂的开发与应用有参考价值。     

我国甲烷氯化物产品成本核算规程的探讨

从核算规程修改的原理、原则及内容等方面对甲烷氯化物产品成本核算规程的修改、规范和完善情况进行了介绍。