The relation between compressive strength of carbon/epoxy fabrics and micro-tow geometry with various bias angles

In this paper compressive tests of carbon/epoxy (plain weave, 3k) fabric composites were performed to investigate the relation between compressive strength and various bias angles and shear angles. Compressive properties such as chord modulus and maximum strength of the fabric composite materials are essential to analyze the drape behaviour and estimate the quality of the final products. Various specimens with different bias and shear angles which were fabricated by using autoclave de-gassing moulding process were prepared to estimate the strength and chord modulus with respect to the bias and shear angle variations. The stacking sequences of the compressive test specimens are [0]_10T, [15]_10T, [30]_10T and [45]_10T for bias specimens and [±37]_10T, [±32]_10T, [±28]_10T, [±22]_10T for sheared specimens. Micro-tow structures were observed to correlate the fabric compressive strength with crimp angle. Anti-buckling rig was involved to prevent specimens from buckling during the compressive tests. The compressive test was performed with 1.3 mm/min strain rates. Compressive test results were compared with calculation results. Facture modes which were classified in two different modes were analyzed using microscopic observation.     

基于缓冲器的编码器接口扩展方法研究

在数据采集测控系统中,用于检测的绝对值角度编码器的输出很多是基于SSI接口,采用SSI接口的绝对值角度编码器输出有时需要连接到多个不同的独立测控系统,由于SSI接口是单访问接口,多主机共享往往是较难解决又不得不解决的问题,本文提出了一种缓冲式并行读取绝对值角度编码器值的方法,实现了信号的并行读取,并给出了硬件和软件设计的思想和方法。     

除尘系统双流量喷嘴的性能试验研究

通过试验研究了除尘系统双流量喷嘴，在喷嘴不同结构参数下气压和水流量变化的特性，分析了喷嘴结构参数、气压、水流量对水压、气耗率、雾化角、颗粒度以及水滴喷出速度的影响规律，优化后的喷嘴有效地改善了烟气冷却不充分的状况。为喷嘴雾化冷却性能的分析研究和优化设计提供了技术途径。     

软岩采场边界失稳原因分析及应对措施

从放矿过程、爆破震动、上覆岩等方面对有底部结构空场法侧壁失稳的原因进行了深入研究，提高了对边界失稳机理的认识；同时，在对大量采场边界失稳观测和分析的基础上，提出了坍塌角经验公式，并以此为依据提出对策。通过生产实践证明，采取的措施行之有效，能避免边界失稳带来的影响，使采切工程和落矿中深孔的布置更具合理性。     

新华钼业公司通风系统改造及两翼对角式通风的应用

对新华钼业公司通风系统的现状及改造方案、改造原则进行详细叙述。运用独立风桥解决围绕矿山井下通风工作中的难题。     

剃齿刀主要参数对剃齿的影响及设计中的主要参数选择

主要对剃齿时的剃齿速度、剃齿切削工况、容屑槽槽型进行了分析和论述,在剃齿刀设计中用分组的方法,对剃齿刀主要参数进行了不同的选择设计,对其产生的效果作了对比分析.从理论上阐述了产生不同效果的原因,在实际中进行了验证.     

可调焦激光水准仪的研制和应用

研制了可调焦激光水准仪,介绍了其结构和性能。利用自行研制的多台可调焦激光水准仪,完成了KrF激光MOPA光学角多路系统中的多项调整测试工作。同时介绍了该仪器在其它光学设备调试中的应用。     

The Role of Visual and Nonvisual Information in the Control of Locomotion.

During locomotion, retinal flow, gaze angle, and vestibular information can contribute to one's perception of self-motion. Their respective roles were investigated during active steering: Retinal flow and gaze angle were biased by altering the visual information during computer-simulated locomotion, and vestibular information was controlled through use of a motorized chair that rotated the participant around his or her vertical axis. Chair rotation was made appropriate for the steering response of the participant or made inappropriate by rotating a proportion of the veridical amount. Large steering errors resulted from selective manipulation of retinal flow and gaze angle, and the pattern of errors provided strong evidence for an additive model of combination. Vestibular information had little or no effect on steering performance, suggesting that vestibular signals are not integrated with visual information for the control of steering at these speeds. (PsycINFO Database Record (c) 2011 APA, all rights reserved)     

一种考虑攻角影响的超音速翼面颤振分析方法

采用活塞理论计算非定常气动力，用新的方法考虑了攻角的影响，和颤振运动方程耦合求解三维翼面的颤振临界条件。分别计算了四种翼型(平板翼，圆弧翼，六边形翼和四边形翼)的颤振临界速度，计算结果和风洞试验数据比较，二者相当一致。     

API油管用J55钢级冷拔无缝钢管研制

介绍了API油管用J55钢级冷拔无缝钢管的产品供货技术要求、试制工艺及质量控制、最终试制结果,对工艺及质量控制过程中φ76二穿机组的技术创新及优化设计进行了较详细的论述.