Electrical and optical properties of fluorine-doped CdO films deposited by ultrasonic spray pyrolysis

The CdO:F samples have been deposited onto microscope glass substrates at 250 °C by ultrasonic spray pyrolysis method. With the incorporation of fluorine into CdO, the direct optical transition has shifted towards the shorter wavelengths, and the transparency of the material has increased at a given wavelength above the fundamental absorption edge. The shift in the absorption edge is explained by means of the Moss–Burstein effect, which is also supported with the results of the current–voltage characteristics. Here, a correlation has been established between the band broadening and the increase in conductivity due to the increase in carrier density.     

靖边气田分离器分离效果对比分析

从理论计算分离器处理能力和现场开展试验两方面入手，对靖边气田目前在用的不同规格分离器的分离效果进行了对比分析，通过对现场数据统计和整理，得到了靖边气田不同规格分离器合理的处理气量，给气田开发建设中分离器的选型和维护改造中分离器的调整提供了依据。     

金属/聚合物复合材料对中能电子的屏蔽作用研究

运用MULASSIS计算程序模拟计算了不同组成的屏蔽材料对空间辐射环境的屏蔽效果,在此基础上进行屏蔽材料的初步设计,并制备了一系列不同组成的金属/聚合物复合材料,结合中能电子照射的实验结果,讨论了组成对金属/聚合物复合材料的屏蔽效果的影响.研究发现,高原子序数和低原子序数金属混合添加的复合物样品具有较好的屏蔽效果.     

大庆油田油气勘探“五五”工程的实践与效果

大庆油田公司确立的油气勘探“五五”工程的核心是立足油气勘探长远发展、统筹老区与新领域勘探,兼顾工程实施与地质研究、系统配套相关技术理论,内容是调整工程和投资结构、完善油气勘探地质理论、发展各项适用技术,目的是促进油气勘探寻求大发现、获得大突破。通过实施“五五”工程,勘探工作运行平稳,勘探成果殷实丰硕,勘探领域层次分明,对油气勘探工作的发展产生了巨大的推动力,确保了大庆探区油气勘探实施的效果。通过对油气勘探“五五”工程实践过程的深入剖析,认为在油气勘探中“思路决定出路、前置加载量是基础、新技术应用是关键”。     

潜孔锤冲击作用下土体变形的有限元分析

潜孔锤冲击挤密钻进过程中周围土体的变形机理是一个高度非线性问题。针对潜孔锤在土中的面-面接触问题,运用Drucker-Prager屈服准则为判据,将土体视为DP材料,通过钻具与土之间的接触及施加冲击载荷来模拟钻进过程,从而建立了潜孔锤在土中冲击挤密钻进的有限元模型。利用非线性瞬态动力学有限元分析手段,对钻进过程中冲击力对土的作用加以研究,分析了钻具周围土体的应力、应变以及钻具与土体的摩擦情况。结果表明,在冲击载荷作用下,锥形钻头前端土体应力集中,并形成应力泡,冲击功主要用于竖向压缩土体,而水平方向的挤压作用相对较小,摩擦应力在钻头锥面附近出现峰值,是影响钻进速度的主要原因之一。     

Fixed collision rate back-off scheme for collision resolution in wireless networks

This investigation proposes a fixed collision rate (FCR) back-off algorithm for wireless networks. The proposed scheme takes advantage of the central unit (CU) in a wireless network to broadcast a common back-off window size to all the users, significantly alleviating the unfairness of bandwidth utilization in conventional binary exponential back-off (BEB) algorithms. It is shown that, when maximum throughput is achieved, collision rate is almost a constant for any traffic load. In the operation of the FCR, the CU dynamically adjusts the back-off window size to keep the collision rate at a constant level for maximum throughput. Simulation results demonstrate that the unfairness of bandwidth utilization in the BEB is significantly lessened and the throughput can be maintained at e^-1≈0.368 when the number of users approaches infinity. The capture effect even further improves system performance.     

The mirror effect and mixture signal detection theory.

The mirror effect for word frequency refers to the finding that low-frequency words have higher hit rates and lower false alarm rates than high-frequency words. This result is typically interpreted in terms of conventional signal detection theory (SDT), in which case it indicates that the order of the underlying old item distributions mirrors the order of the new item distributions. However, when viewed in terms of a mixture version of SDT, the order of hits and false alarms does not necessarily imply the same order in the underlying distributions because of possible effects of mixing. A reversal in underlying distributions did not appear for fits of mixture SDT models to data from 4 experiments. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

论普通型胶辊表面不处理的合理工艺参数

论述了普通胶辊表面不处理的性能特点和存在问题，技术措施和合理工艺参数，提高了成纱条干水平，减少缠绕和磨损。     

On the elemental effect of AlCoCrCuFeNi high-entropy alloy system

The AlCoCrCuFeNi high-entropy alloy system was synthesized using a well-developed arc melting and casting method. Their elemental effect on microstructures and hardness was investigated with X-ray diffraction, scanning electron microscopy and Vickers hardness testing. The alloys exhibit quite simple FCC and BCC solid solution phases. Co, Cu and Ni elements enhance the formation of the FCC phase while Al and Cr enhance that of the BCC phase in the alloy system. BCC phases form a spinodal structure during cooling. Copper tends to segregate at the interdendrite region and forms a Cu-rich FCC phase. Low copper content renders the interdendrite as a thin film and the as-cast structure like recrystallized grain structure. The formation of BCC phases significantly increases the hardness level of the alloy system. The strengthening mechanism is discussed.     

Anomalous Hall and Nernst Effects in Normal State of SC Cuprates

It is demonstrated that scattering of mobile charge carriers by fluctuations of local spin density in the normal state of SC-cuprates results in anomalous contribution to the transport phenomena (Hall and Nernst effects are included). Depending on their sign and magnitude, they can change value and sign of the corresponding effect measured.