织物-树脂复合材料层压板的准静态侵彻机理

本文利用MTS得到了芳纶和高强维纶织物复合材料层压板受尖头侵彻体穿孔的准静态侵彻曲线 ,比较和分析了不同类型纤维集合体与热固性树脂和热塑性树脂复合材料的破坏模式 ,并考察了芳纶织物复合材料层压板侵彻的逐步破坏过程 ,揭示了复合材料层压板的准静态侵彻机理。     

Prediction of axial velocity profiles and solids hold-up in a rotary kiln

Axial bed depth profiles were experimentally measured in a rotary kiln containing ilmenite particles under steady state and transient conditions. The variables include feed rate of solids, inclination and rotational speed of the kiln. and dam height. The variation of the axial velocity with kiln axis was estimated. The semi-experimental model proposed by Perron and Bui (1990) was modified to include the effect of the variables of the present study. The mean residence time of solids was estimated from the fractional hold-up and expressed in terms of the process variables. The transients induced by a step change in any of the operating conditions were measured as variation of discharge rate of solids with time.     

Porosity of recycled concrete with substitution of recycled concrete aggregate: An experimental study

In this paper, we present the experimental analysis of samples of recycled concrete (RC) with replacement of natural aggregate (NA) by recycled aggregate originating from concrete (RCA). The results of the tests of mechanical properties of RC were used for comparison with tests of mercury intrusion porosimetry (MIP), in which the distribution of the theoretical pore radius, critical pore ratio, the surface area of the concrete, threshold ratio and average pore radius were studied at ages of 7, 28 and 90 days. The results showed some variation in the properties of the RC with respect to ordinary concrete. Porosity increases considerably when NA is replaced by RCA. Additionally, a reduction in the mechanical properties of the RC is seen compared with ordinary concrete when porosity increases.     

硅灰混凝土的研究及其在公路道面的应用

 了提高道路路面混凝土的抗磨能力，采用硅灰代替部分水泥的方法，对硅灰混凝土的性能进行了较系统的试验研究。成果表明其抗压强度、抗弯强度、抗磨强度等指标都得到明显提高，全面达到和超过了规范要求。并已在丹江口水利枢纽上坝公路中得到应用，实践证明硅灰混凝土技术可靠、经济合理、易于施工。特别是抗磨度的提高，对延长公路路面的使用寿命具有重要意义。     

计算机网络远程通信系统软硬件设计与实现

本文介绍一种新型远程通信系统，它克服了一般远程通信系统速度慢的缺点，将通信速度提高了８０多倍，同时，其硬件比一般远程通信系统简单，成本只有一般远程通信系统的一半左右，进一步提高了新型远程通信系统的性能价格比。在新型系统中精简了远程通信协议，提高了信道有效利用率；采用了各种行之有效的数据压缩算法，并加以改造，使之性能最佳；提供了程序远程透明执行功能，大大提高了系统的响应速度。     

微合金化高强度钢轧制采用的工艺技术

本文综述微合金化高强度钢轧制采用的工艺技术，其中包括热装热送、板坯加热、控轧控冷、快速冷却、采用的新设备等工艺技术。重点是生产低碳、高韧性、高强度、易焊接的造船用钢采用形变热处理技术，以提高产量和质量，节省昂贵的Ｎｉ、Ｃｒ、Ｍｏ等合金，降低生产成本。     

Ionic Strength Effects on Heat-induced Gelation of Myofibrils and Myosin from Fast- and Slow-twitch Rabbit Muscles

The effects of ionic strength on myofibrils and myosin from rabbit fast-twitch Psoas major (PM) and slow-twitch Semimembranosus proprius (SMp) muscles before and after heating were studied by electron microscopy and thermal scanning rheometry. The direct suspension of proteins in low ionic strength (0.2M KCl; pH 6.0) led to very weak gels, whereas a gradual lowering of the ionic strength (by dialysis against 0.2M KCl; pH 6.0) of 0.6M KCl protein solutions induced strand-type networks at low temperature and strong heat-induced gels. As shown by transmission and scanning electron micrographs, in low ionic strength, SMp myosins formed shorter filaments before heating and thinner and shorter structures in heat-induced gels, as well as a lower gel porosity than PM myosins.     

高强度烧结钢

为开拓粉末冶金材料新的应用领域，近年来对高强度烧结钢进行了大量的研究与开发。本文简要介绍Ｈｏｇａｎａｓ公司开发的一些高强粉末冶金材料及对一些高强度烧结材料尺寸变化的控制。     

Rene′95粉末合金喷丸强化研究

研究了Ｒｅｎｅ′９５热等静压粉末高温合金喷丸后的残余应力场、组织结构、致密度及其与疲劳性能的关系。结果指出，喷丸强化能够有效地提高合金高周和低周疲劳强度。