西气东输工程用X70热轧板卷屈服强度检测值波动大的探讨

对西气东输工程用X70热轧板卷检验过程中出的屈服强度σ0.5波动大的情况进行了分析，认为拉伸试样弯曲是主要原因。这一问题可通过反复压平试样，确保试样的平直度以及适当提高钢的强度的方法加以解决。     

高强度钢板在汽车车身上的应用及问题对策

主要介绍高强度钢板使用量增加背景、已开发或正在开发的种类、高强度钢板在汽车车身上的应用以及高强度钢板使用中存在的主要问题及其对策等。     

Synthesis and characterization of acidic properties of Al-SBA-15 materials with varying Si/Al ratios

Al-SBA-15 of varying Si/Al ratios in the range 11.4–78.4 was synthesized using tri-block copolymer P123. The calcined materials were examined by XRD, pore size distribution, surface area, ²⁷Al NMR spectroscopy. The acidity and acid strength distribution were studied using microcalorimetric adsorption of NH₃. The acidic properties were also examined by cumene cracking reaction as a function of Si/Al ratios. Systematic variation of acidity and activity was observed as a function of Si/Al ratio. The initial heats of NH₃ adsorption correlated well with activity indicate that acid sites with ΔH > 100 kJ/mole is responsible for cumene cracking activity. Linear correlations were obtained with total acidity and cumene cracking activities. The tetrahedral aluminum was found to be responsible for the observed acidities and catalytic activities.     

Modeling the effect of pigment morphology on the dynamic compression of coating layers using DEM

In the present paper, discrete element method (DEM) was employed to investigate the effect of pigment morphology on packing dynamics and compressive behavior of paper coating layers in calendering process. Spherical, platy, and needle-like particles, representing GCC, delaminated clay, and aragonite PCC pigments, were considered in this study. For each particle shape, the compression of coating structures formed by mono-sized and poly-dispersed pigments were modeled. Stress–strain behavior of the coating layers and in-plane and out-of-plane movements of the pigment particles during the compression were computed under the same maximum compressive stress. Simulation results revealed that the in-plane movements of the pigment particles during compression in the calender nip were small in magnitude (<0.35 μm). These findings help to better understand the smoothening phenomena of coating structures during the calendering process.     

含Zr低合金高强度钢中夹杂物的特性

用电子探针研究了含Zr低合金高强度钢中夹杂物的形貌、大小及分布等特性。结果表明 ,钢样中的夹杂物为圆形 ,呈分散分布 ,其组成系含ZrO2 的复合夹杂物 ,而且MnS依附此复合夹杂物成核和长大。钢中添加少量Zr可明显改善夹杂物形态和分布 ,从而改善钢的强度和韧性     

误读与纠正

分析材料试验机度盘偏转角度小 (准确度低 )、试样打滑、定义 (上屈服强度 -下屈服强度 -屈服强度 )模糊、不同应力速率等导致误读 ,并针对误读原因提出纠正方法。     

锅炉压力容器用SA515Gr70钢的组织与性能研究

通过钢的成分的设计，研制了一种用于制造锅炉汽包和压力容器的奥氏体粗晶粒钢，这种钢经一定热处理后，可获得高强度高韧性的使用要求。     

卸荷裂隙在水利水电工程建设中的危害

卸荷裂隙是对水工建筑物稳定最不利的软弱结构面之一。文中较系统地介绍了这种结构面的特点、分布规律、形成的力学机理、对工程的危害、勘查方法及处理措施。     

Na_2O－Al_2O_3－SiO_2系统霞石微晶玻璃机械强度的研究

霞石微晶玻璃是一种高强度的新型无机非金属材料．本文以Ｎａ２Ｏ－Ａｌ２Ｏ３－ＳｉＯ２系统为基础，引入晶核剂和复合澄清剂，经高温熔制和两步热处理制备的霞石微晶玻璃，具有较高的抗压和抗折强度．结果表明，霞石微晶玻璃的机械强度与霞石晶体及试样的结构有关，也与微晶化热处理的时间有关。