Hydrodynamics and liquid phase axial mixing in orifice pipe reactor

Two phase flow in a horizontal pipe, with orifice plates placed at regular intervals as obstructions, was studied for the effect of phase velocities on flow patterns, fractional phase hold-ups, pressure drop and liquid phase axial dispersion. Radioactive technetium-99m (as an aqueous solution of sodium pertechnatate) was used as tracer. A pulse injection technique with two point measurements was employed. Three different orifice diameters were used (8 mm, 16 mm, and 20 mm) in a pipe diameter of 32 mm. The orifice spacing was 500 mm in all cases. Superficial gas (air) velocity was varied over a range from 0.02 m/s to 1.0 m/s and superficial liquid (water) velocity from 0.03 m/s to 0.85 m/s. Different flow patterns under different flow conditions were identified and a generalised flow map is presented. Variations in hold-ups and pressure drop with flow patterns have been explained. Rational correlations have been developed for fractional phase hold-ups and pressure drop. A preliminary comparison of two phase gas-liquid flow in a horizontal pipe with orifice obstructions (to be called orifice pipe reactor), as a gas-liquid contacting device, is made with a conventional bubble column reactor. Recommendations have been made for future work.     

GRIP管混凝土组合结构压弯构件非线性全过程分析

本文应用细观力学、经典层板理论、平截面假定、FRP约束混凝土本构模型及数值积分对GFRP管混凝土组合结构压弯构件进行了非线性全过程分析。通过理论计算发现GFRP管混凝土组合结构能有效地提高构件的承载力，且构件具有良好的变形能力。FRP壳体参与承载且有效地约束混凝土的变形，显著提高核心混凝土强度和变形能力。文中讨论了轴压比、长细比、径厚比、混凝土强度等级、纵筋配筋率、铺层角变化对极限水平荷载和极限水平位移的影响，从而得到了一些有益的结论。     

回转窑传热模型与数值模拟

对回转窑内传热过程进行了分析 ,在已有研究基础上归纳了各项换热系数的关联式 ,尤其结合热渗透模型完善了回转壁面与料床之间传热机制的研究 ,并提出通用的计算关联式。进而提出了内热式炉型的一维轴向传热模型 ,并根据已发表的试验数据验证了该模型和各换热系数的适用性。计算表明在窑内低温段 ,物料的受热主要来自其覆盖的回转壁面对其加热 ;而在高温段 ,气体的辐射热量成为加热料床的主要热源。此外 ,由物料进口端沿轴向窑壁散热增大 ,在窑内高温段窑壁的散热甚至高于物料吸热量 ,因此在回转反应器的设计中应充分考虑窑壁散热造成的热效率降低并采取相应措施。     

Dis-Bond Detection and the Possibility of Interfacial Stiffness Measurement with Real-Time Impulsive Stimulated Thermal Scattering

We describe a new, real-time, noninvasive method for dis-bond (delamination) detection which is based on a technique known as impulsive stimulated thermal scattering (ISTS). We first explain the ISTS technique and compare data from polyimide films tightly bound to silicon substrates with data from unsupported polyimide films. The observed differences in the data from these two cases are readily understandable and offer an unmistakable signature for delaminations. We demonstrate ISTS dis-bond detection by locating and mapping out randomly-distributed and spatially-fine regions of delamination in a polyimide film-silicon substrate system. Finally, we present two simple physical models of the interfacial region which comprehensively describe acoustic data from the tightly-bound and the unsupported samples. With insight from simulations using these models, we suggest how ISTS might be used to determine interfacial adhesion quality and we show how ISTS sensitivity to interfacial effects can be adjusted.     

On Modulus and Fracture Toughness of Rigid Particulate Filled High Density Polyethylene

A Kaolin-filled, high-density polyethylene (HDPE) system was used to illustrate the influence of particulates on modulus and toughness of the bulk material. A variation of filler content, particulate size and coupling quality for two HDPE-matrix systems with different viscosity led to a strong dependency of elastic modulus and fracture toughness under various testing conditions, e.g. static loading, fatigue and impact.

A stiffness improvement with increasing filler content was achieved by all coupling qualities. The developed Kaolin reinforcement of HDPE with optimised coupling offers an improvement of the stiffness and toughness under all investigated loading conditions. The degree of improvement depends on the particulate size and matrix viscosity. The energy dissipation mechanisms were investigated by fractographic analysis.     

快速闸门断流的轴流泵起动过程三维数值模拟

针对轴流泵机组起动过程的研究是泵站安全稳定运行研究的重要环节。为了准确捕捉轴流泵机组在起动过渡过程中的动态特性,建立轴流泵机组的全流道三维模型,采用三维CFD计算软件Fluent,利用基于有限体积法的动网格技术,配合VOF多相流模型对快速闸门断流的轴流泵机组起动过程进行了三维瞬态数值模拟,获得了轴流泵机组起动过渡过程中的流态变化及外特性参数的变化规律。闸门开启时间为60s时,机组起动扬程在12s时达到最大值2.76m,为运行扬程的1.28倍。减小快速闸门开启时间能够降低机组最大起动扬程,但同时会加剧回流及闸门处的水流撞击。计算结果表明:动网格技术结合VOF多相流模型可以较好的应用于快速闸门断流的轴流泵机组起动过渡过程数值模拟中,其结果可为泵站水力设计及轴流泵机组的过渡过程研究提供参考。     

循环荷载作用下重塑饱和粉黏土的刚度弱化特性研究

以东海大桥海上风电场项目为课题背景,通过动三轴系统对重塑饱和粉质黏土开展一系列长期不排水循环加载三轴试验,分别考虑围压、动应力比和频率3种因素,特别是对高频(f5 Hz)下土体的动力弱化特性进行了研究。试验结果表明:累积塑性应变与累积孔压随着循环次数的增加而增大并且趋于稳定,呈现出应变软化和孔压软化现象。割线动变形刚度模量和割线动弹性刚度模量则随着循环次数的增加,先急剧降低然后趋于稳定,从而表现出刚度弱化现象。进一步研究了割线动弹性刚度模量与循环应变幅值的关系,割线动弹性刚度模量的衰减趋势受动应力比和频率的影响不大,与围压有关,围压越大,割线动弹性刚度模量衰减趋势越慢,衰减稳定幅值越低。     

竖向荷载作用下斜桩承载特性数值分析

近年来,斜桩在桥梁、码头、海上钻井平台及大型输电线路塔架基础等工程中得到广泛应用,研究不同倾角斜桩的荷载传递及承载特性实用意义较大。基于ABAQUS软件,考虑桩土接触特性,模拟分析了不同倾角斜桩的承载特性。结果表明:桩身倾角不大于10°时,倾斜角对单桩的极限承载力影响不大,但会在桩身产生一定弯矩以及桩顶产生一定的水平位移;桩身轴力沿桩长方向的衰减速率随桩身倾角的增大而增大;斜桩桩身弯矩主要分布在桩顶下1/2桩长范围内,其最大值的位置不受桩身倾角以及桩顶竖向荷载的影响;斜桩桩身侧摩阻力沿桩长大致呈"S"型分布,其桩顶以下1/6桩长范围内侧摩阻力远远大于直桩。     

基于概念设计阶段的解耦模式车门截面形状优化方法

为了提高车门静态刚度, 采用基于HDMR理论的多参数解耦优化方法与Morph技术结合, 对一款处于概念设计阶段车门的主截面形状进行优化。这种建模方法的特点在于通过少量的样本点识别形状变量之间的耦合关系, 进而将高维问题进行分解, 在保证精度的前提下提高计算效率。采用Kriging插值方法对Cut-HDMR的各项进行构造, 得到车门各刚度下的考察点位移和质量的近似模型, 进而利用非支配排序多目标遗传算法（NSGA-Ⅱ）对近似模型进行优化, 在车门静态刚度均达到设计要求的前提下合理进行减重, 使垂直刚度和扭转刚度得到了很大的提高。     

轴流压气机旋转失速建模与检测II: 基于北航低速压气机试验台的实验研究

轴流压气机旋转失速和喘振的提前检测对于提高压气机工作效率和稳定性具有重要的意义.本文以北京航空航天大学航空发动机重点实验室的低速轴流压气机实验台为研究对象,基于确定学习理论及动态模式识别方法,开展旋转失速初始扰动近似准确建模和快速检测研究.首先,在压气机机匣壁面周向布置多个动态压力传感器,获取压气机失速前和失速先兆的动态压力信号,基于确定学习理论对旋转失速初始扰动的内部系统动态进行建模;其次,基于以上建模,利用微小振动故障检测方法实现对旋转失速的离线和在线提前检测.实验结果表明,本文所提方法能够在不同转速情况下,提前0.3 s~1 s实现对旋转失速的实时在线检测.