高层住宅结构设计

主要介绍长沙梦泽园高层住宅从基础到上部楼层各部位的结构设计,以及在设计、施工过程中所考虑的一些问题及处理方法。     

不同活化剂对石油焦基活性炭孔结构的影响

以石油焦为原料 ,Na OH,KOH和 Na2 CO3 为活化剂制备活性炭 ,采用氮气吸附考察了不同活化剂对活性炭的比表面积、中孔和微孔孔径分布、孔容积及平均孔径等孔结构的影响 .结果表明 :KOH活化制备的活性炭包含 1 nm的微孔和 4nm的中孔 ,总孔容 0 .648cm3 /g,比表面积大 ;Na OH制备的活性炭以 1 nm的微孔为主 ,占总孔容 ( 0 .1 65 cm3 /g)的 98% ,平均孔径 1 .83nm;Na2 CO3 制备的活性炭以 4nm的中孔为主 ,占总孔容 ( 0 .1 43cm3 /g)的 68.5 % ,平均孔径 3.42 nm,比表面积小 .3种样品的孔径都呈现出多峰分布特征 .KOH和 Na2 CO3 活化制备的活性炭的 N2 吸附脱附曲线属于 型 ,Na OH活化制备的活性炭吸附脱附曲线属于 型 .     

Structure development in amorphous starch as revealed by X‐ray scattering: Influence of the network structure and water content

The evolution of the amorphous structure of starch was characterized during the drying process by real‐time X‐ray wide‐angle scattering. The X‐ray diffractograms of injection‐molded starch show two superposed, rather broad, scattering maxima indicative of noncrystalline structures. The location of the two peaks has been associated to disordered starch single helices. A third maximum that arises upon drying the material in vacuum is associated to the scattering emerging from regions containing double helices. A model for the starch network is proposed, assuming a primary and a secondary component. The wider, temperature stable component appearing first, is correlated to the entanglement network of the melt. The narrower network component, which is created later, at lower temperature (secondary network), is explained by the formation of double helix regions that densify the wider primary network. The secondary network is increased strongly by the drying process. X‐ray experiments performed during the penetration of water, provoking a higher molecular mobility, reveal a better‐packed helical structure that becomes the precursor of a double helix crystalline formation. When temperature increases, the secondary network is dissolved and water molecules arrange themselves in better‐organized crystals as strongly bound crystal water. © 2005 Wiley Periodicals, Inc. J Appl Polym Sci 99: 1880–1886, 2006     

New catalyst systems for the polymerization of acetylene

The catalytic activities of WCI₆Ph₄Sn, MoCl₅Ph₄Sn and tetrabenzyltitanium were examined in the polymerization of acetylene. The structure, morphology and electrical conductivity of the doped and non doped polyacetylene were also studied.     

Platinum particle size effect on the oxidative dehydrogenation of aqueous ethanol

The effect of the platinum particle size was investigated for the catalytic oxidative dehydrogenation of aqueous ethanol to ethanal at a temperature of 303 K, an ethanol concentration of 260 mol m^–3, a partial oxygen pressure 60 kPa, a pH of 9, and an ethanal and ethanoate concentration of 20 mol m^–3. A particle size effect on the turnover frequency was observed but only for particle sizes smaller than 2 nm. Hence, the reaction shows a limited structure sensitivity.     

氧化铝上吸附平衡与动力学的分形特性

在实验测定氧化铝吸附氮气的平衡和动力学过程的基础上 ,由平衡数据得到分形维数 ,对动力学结果分别用欧氏几何和分形几何的动力学模型进行处理 ,比较两种方法得到的扩散系数之间的差别。结果表明 :粉状氧化铝的分形维数为 2 .12 ;采用分形动力学模型得到的扩散系数同欧氏几何扩散模型的结果不一样 ,扩散系数不随浓度的变化而改变 ;而欧氏几何扩散模型中的扩散系数随浓度变化发生改变 ,且变化符合Darken关系     

An alignment-free fingerprint bio-cryptosystem based on modified Voronoi neighbor structures

Bio-cryptography is an emerging security technology which combines cryptography with biometrics. A good bio-cryptosystem is required to protect the privacy of the relevant biometric data as well as achieving high recognition accuracy. Fingerprints have been widely used in bio-cryptosystem design. However, fingerprint uncertainty caused by distortion and rotation during the image capturing process makes it difficult to achieve a high recognition rate in most bio-cryptographic systems. Moreover, most existing bio-cryptosystems rely on the accurate detection of singular points for fingerprint image pre-alignment, which is very hard to achieve, and the image rotation transformation during the alignment process can cause significant singular point deviation and minutiae changes. In this paper, by taking full advantage of local Voronoi neighbor structures (VNSs), e.g. local structural stability and distortion insensitivity, we propose an alignment-free bio-cryptosystem based on fixed-length bit-string representations extracted from modified VNSs, which are rotation- and translation-invariant and distortion robust. The proposed alignment-free bio-cryptosystem is able to provide strong security while achieving good recognition performance. Experimental results in comparison with most existing alignment-free bio-cryptosystems using the publicly-available databases show the validity of the proposed scheme.     

Assessing the predictive capability of two‐phase models for the mechanical behavior of alumina/epoxy nanocomposites

A review of analytical modeling of particulate reinforcement is made as a prelude to the problem of microstructural inhomogeneity in nanocomposite materials. Noting the inevitability of dispersion nonuniformity, and variations in agglomerate morphology and filler‐matrix interaction, the need to question the application of such models to novel materials arises. Employing the mechanical properties of alumina/epoxy nanocomposites, with known dispersion characteristics, an evaluation of the predictive capability of various models for Young's modulus, strength, and failure strain is made. Comparison between models is accompanied by a discussion of the parameters used in the fitting of macroscopic behavior to microstructural features. © 2005 Wiley Periodicals, Inc. J Appl Polym Sci 98: 869–879, 2005     

Adhesion Effects of Intermediate Layers on the Densification of Ceramic Powders

In the ceramic technology the first step to produce sintered bodies is the manufacturing of powders which then are densified. The adhesion mechanisms between the single particles and the agglomerates produced from them determine the densification process. Starting from theoretical considerations adhesion mechanisms, such as solid bridge formation, adhesive bonding and glide-promoting effects, are discussed in principle. Subsequently, the effects of surface-active substances on the densification behaviour of clay-ceramics and oxide-ceramic bodies are discussed. Further, the evaluation of the action of additives to the powder mixtures on the microstructure of the compacts, such as porsity and texture, leads to a compaction equation which describes the transition from the powder pile to a densified green body.     

Composites based on eucalyptus tar pitch/castor oil polyurethane and short sisal fibers

Polymeric materials are being developed with renewable resources to promote industrial progress with environmentally friendly technologies. For this reason, polyurethane samples were prepared with 4,4′‐diphenylmethane diisocyanate (NCO/OH = 1), eucalyptus tar pitch (biopitch), castor oil as a polyol, and dibutyltin dilaurate as a catalyst. These materials were reinforced with different contents of short sisal fibers (0, 2.5, 5.0, 7.5, and 10.0%) and were prepared by resin‐transfer molding. The composites were characterized by IR absorption spectroscopy, thermal analysis (thermogravimetry and differential scanning calorimetry), impact resistance, scanning electron microscopy, and water absorption resistance. These materials showed hydrophobic characteristics, despite the addition of sisal fibers. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 89: 3797–3802, 2003