铁心电抗器气隙等效导磁面积计算

以一台实际干式带气隙铁心电抗器为例,建立电抗器的三维电磁场仿真模型,给出仿真模型内的基本假设和边界条件;采用有限元分析,计算出了不同气隙下铁心电抗器的电感值和磁路中的磁感应强度矢量图,并与部分实测数据相对比,验证了仿真模型与仿真结果的正确性.然后,以铁心电抗器的电感量为主要研究对象,定量计算在不同气隙与不同铁心直径下电抗器的电感值,给出了电感值随气隙和铁心直径的变化曲线并对其拟合及定性分析.最后,结合铁心电抗器计算公式和基本假设,推算出气隙处磁通等效导磁面积扩大系数,研究气隙等效导磁面积扩大系数随气隙和铁心直径的变化关系.所得结论可以为此类电抗器的设计计算提供一定的技术支持.     

大数据背景下多元生态化的高职英语课程设置——以江苏建筑职业技术学院为例

以课程理论为依据,参考国家示范高职院校江苏建筑职业技术学院的大学英语课程体系改革实践,探讨现有高职英语课程设置中存在的一些实际问题,提出在大数据时代的网络幕课（MOOCs）背景下,高校应建立一种多元生态化的高职英语课程体系,进一步促进课程体系改革和以学生为中心的个性化教学发展,同时为满足不同学生需求的“分类培养,分层教学”教学模式提供理论支持.     

Surface plasmon resonance-induced Ag-BaTiO3 composites for catalytic performance

Ferroelectric BaTiO₃ was combined with Ag nanoparticles for piezocatalytic and photocatalytic viewpoints. Microstructural characterization (X-ray diffraction and electron microscopy images) revealed that the Ag was successfully bounded with BaTiO₃. X-ray photoelectron spectrum also confirmed the presence of Ag. Further, its performance was examined for dye degradation under visible light (for photocatalysis) and ultrasonication (for piezocatalysis). In both the catalysis processes, there was a significant improvement in Ag-loaded BaTiO₃ sample-based catalytic reactions. Catalytic performance was evaluated for multiple cycles and was found consistent. Scavenger tests were also performed to understand catalytic reactions.     

大直径薄环加工专用夹具

为加工大直径薄环类工件设计了专用的U型结构夹具。该夹具可完成内孔、外圆、端面的加工，还可重复使用。     

基于局部间隙状况电火花磨削周期的伺服策略

分析了现有的一些电火花磨削伺服策略存在的问题，提出了基于周期性和局部性特点的伺服策略。该策略以回转周期为控制周期，以局部间隙状况为控制的依据，通过极端局部间隙状况控制极端局部表面加工状态，从而控制整个表面优质高效的加工，具有快速修圆和一定的自动寻优功能。     

Cu对Al-Zn系a1／（a1＋a2）边界走向的影响

对平衡处理(300℃～340℃)后的Al-Zn及Al-Zn加Cu合金a1相成分进行了电子探针微区分析。确定了Cu对a1 a2溶解度间隙形状，即a1/(a1 a2)边界走向的影响。该边界随着Cu含量的增加，向低Zn侧偏移，而不是此前所确定的向高Zn侧偏移。这一结果支持近年的热力学计算结果，溶解度间隙呈“隧道形”，而不支持根据实测相图推测的“钟罩形”。     

Application of High Temperature Corrosion-Resistant Materials and Coatings Under Severe Corrosive Environment in Waste-to-Energy Boilers

Corrosion-resistant materials (CRMs) and coatings are key technologies to increase power generation efficiency and reduce maintenance in waste-to-energy (WTE) plants. Corrosion environment became severe as steam temperatures have increased. The steam condition of more than 400 °C/3.9 MPa became possible in WTE boilers by using highly durable corrosion-resistant coatings, such as thermal spray of Al/80Ni20Cr alloy, HVOF-sprayed NiCrSiB alloy, Alloy 625 weld overlay for waterwall tubes and also superheater tubes. Also, the use of 310S type stainless steels and high Cr-high Mo-Ni base and high Si-Cr-Ni-Fe alloys have progressed because of a better understanding of corrosion mechanisms. Furthermore, high durability coatings using cermet and ceramic materials were applied to high temperature superheaters. This paper describes the major developments and the application of CRMs and coating technologies in the last 30 years in WTE plants, the corrosion mechanisms of alloys, the deterioration mechanisms of spray coating layers, and future subjects for the development of corrosion-resistant materials and coatings.     

焊接工艺参数对奥氏体不锈钢焊接接头腐蚀行为的影响

通过草酸腐蚀和硫酸-硫酸铁腐蚀实验，研究了奥氏体不锈钢焊接接头腐蚀与焊接热输入的关系。结果表明，随着焊接线能量的增加，其焊接接头腐蚀越严重。随着焊接线能量的增大，腐蚀率增大且有加速趋势。     

Microstructure and mechanical properties of wrought magnesium alloy AZ31B welded by laser-TIG hybrid

The laser-TIG hybrid welding was mainly used to weld the wrought magnesium alloy AZ31B. The tech-nical characteristics of laser-TIG hybrid welding process was investigated and the interactional mechanism between laser and arc was discussed, at the same time the microstructure and mechanical properties of the wrought magnesi-um alloy AZ31B using laser-TIG hybrid welding were analyzed by optical microscope, EPMA, SEM, tensile ma-chine, hardness machine. The experimental results show that the presence of laser beam boosts up the stability of the arc during high speed welding and augments the penetration of weld； the crystal grains of magnesium alloy weld are fine without porosity and cracks in the best welding criterion and the microstructure of HAZ does not become coarse obviously. The elements profile analysis reveals that Mg content in the weld is lower than that of the base metal, but Al content is higher slightly. Under this experimental condition, the wrought magnesium alloy AZ31B joint can be achieved using laser-TIG hybrid process and the tensile strength of the joint is equivalent to that of the base metal.     

锚链钢弯环内侧开裂分析原因

对锚链钢弯环的原材料和车削后热处理材料及开裂的弯环进行低倍、组织、断口检验，结果表明弯环开裂是由车削后的热处理工艺和焊接工艺控制不当造成的。