高可靠性烧结金属丝网防爆元件的应用研究

烧结金属多孔元件作为隔爆元件的应用，很好地满足了火焰过滤元件的性能要求，进一步拓宽了烧结金属多孔元件的应用领域，章在论述其性能特点、结构类型的同时，对其在微孔结构设计上的差异也进行了描述。     

Adaptive Edge Detectors for Piecewise Smooth Data Based on the minmod Limiter

We are concerned with the detection of edges—the location and amplitudes of jump discontinuities of piecewise smooth data realized in terms of its discrete grid values. We discuss the interplay between two approaches. One approach, realized in the physical space, is based on local differences and is typically limited to low-order of accuracy. An alternative approach developed in our previous work [Gelb and Tadmor, Appl. Comp. Harmonic Anal., 7, 101–135 (1999)] and realized in the dual Fourier space, is based on concentration factors; with a proper choice of concentration factors one can achieve higher-orders—in fact in [Gelb and Tadmor, SIAM J. Numer. Anal., 38, 1389–1408 (2001)] we constructed exponentially accurate edge detectors. Since the stencil of these highly-accurate detectors is global, an outside threshold parameter is required to avoid oscillations in the immediate neighborhood of discontinuities. In this paper we introduce an adaptive edge detection procedure based on a cross-breading between the local and global detectors. This is achieved by using the minmod limiter to suppress spurious oscillations near discontinuities while retaining high-order accuracy away from the jumps. The resulting method provides a family of robust, parameter-free edge-detectors for piecewise smooth data. We conclude with a series of one- and two-dimensional simulations.To David Gottlieb, on his 60th birthday, with friendship and appreciation.     

正则化长波方程的三次样条差分模拟

本文对正则化长波方程(RLW方程)的时间、空间项分别采用三次样条公式进行离散,所得到的差分方程为三点、三层隐格式,对时间的精度为四阶,对空间的精度为二阶,每个时间步只需求解一个三对角方程组,而三次样条配置法在每个时间步中需要求解三个三对角方程组。本文对单个孤立波的演化进行了计算,参数与文[8]相同,其结果与解析解的最大绝对误差均保持在10~(-3)的量级以内,与文[8]给出的数值方法精度相当。对两、三个孤立波的相互碰撞,本文结果显示出在忽略10~(-3)量级的误差后,碰撞前后的孤立波形状保持不变,无论是一个孤立波的演化,还是两、三个孤立波相互碰撞,当将波形放大100倍后均可以发现有振荡的尾波,这说明这类振荡尾波的产生并非真实的物理现象,而是由数值误差产生的。本文认为仅从工程应用的意义上说,RLW方程具有孤立子性质的结论是可以接受的。     

热分层流动计算中若干差分格式的比较

本文应用常规的守恒方程及湍流模型，对二维池内热分层流动建立了数学模型，并在Ｐａｔａｎｋａｒ的压力校正法基础上对该数学模型进行了数值计算，计算中的差分格式为乘方格式、一阶迎风、二阶迎风和ＱＵＩＣＫ。通过与实验的比较分析，建议计算应采用ＱＵＩＣＫ格式，并在进行风格独立性试验的基础上使用加密网络。     

综合应用地震属性、测井数据反演储层参数

本文研究了样点地震属性的特征提取，利用BP神经网络建立测井声波时差和地震属性的非线性映射关系。采用距离加权平均对研究区所有井的反演结果进行外推。为了提高分辨率和计算结果的准确性，详细分析、研究了适合于地震信号分解和重构的小波，以及测井声波时差和地震波阻抗与层界面的关系。最后，对反演的声波时差资料进行界面影响校正，进而计算出较符合实际情况的孔隙率参数。经已知井和新钻井验证，计算结果和实际情况相一致，效果令人满意。     

NUMERICAL MODEL FOR DYNAMIC SIMULATION OF TRAFFIC FLOW

ＮＵＭＥＲＩＣＡＬＭＯＤＥＬＦＯＲＤＹＮＡＭＩＣＳＩＭＵＬＡＴＩＯＮＯＦＴＲＡＦＦＩＣＦＬＯＷＷｕＺｈｅｎｇ；ＺｅｎｇＬｉ－ｎｏｎｇ（ＤｅｐａｒｔｍｅｎｔＡｐｐｌｉｅｄＭｅｃｈａｎｉｃｓ，ＦｕｄａｎＵｎｉｖｅｒｓｉｔｙ，Ｓｈａｇｈａｉ２００４３３，Ｐ...     

Investigation of texture effect on visual colour difference evaluation

The texture effect on visual colour difference evaluation was investigated in this study. Five colour centers were selected and textured colour pairs were generated using scanned textile woven fabrics and colour‐mapping technique. The textured and solid colour pairs were then displayed on a characterized cathode ray tube (CRT) monitor for colour difference evaluation. The colour difference values for the pairs with texture patterns are equal to 5.0 CIELAB units in lightness direction. The texture level was represented by the half‐width of histogram, which is called texture strength in this study. High correlation was found between texture strength and visual colour difference for textured colour pairs, which indicates that an increasing of 10 units of texture strength in luminance would cause a decreasing of 0.25 units visual difference for the five colour centers. The ratio of visual difference between textured and solid colour pairs also indicates a high parametric effect of texture. © 2005 Wiley Periodicals, Inc. Col Res Appl, 30, 341–347, 2005; Published online in Wiley InterScience (www.interscience.wiley.com). DOI 10.1002/col.     

疲劳裂纹的灰色残差预测

借助灰色理论，建立了预测疲劳裂纹扩展的灰色残差预测模型，并应用此模型预测了某不锈钢构件腐蚀疲劳裂纹的扩展，得到了较高精度的预测结果，为疲劳裂纹预测提供了一种简易而可靠的新途径。     

热流量计的原理

根据工业及家庭供暖的要求，设计并研制成一种新型的热流量计，它采用方便而新颖的采集信息方式，并使用CPU精确实时的进行控制和运算，保证了热流量计的精确、实时和“分户计量”。