空心微珠改性硬质聚氯乙烯复合材料的应用研究

经过改性的超细空心微珠可以作为填料加入到硬质聚氯乙烯（PVC－U）树脂中，同时改善PVC树脂的流变性、冲击性能和刚性等性能。研究结果表明，超细空心微珠加入到硬质PVC管材中，可以明显改善PVC硬管的加工流动性能，显著缩短塑化时间，降低最大扭矩。而超细空民微珠加入到硬质PVC板材时，可以提高PVC硬板的冲击性能，减小制品的收缩率，赋予PVC硬板优异的耐腐蚀性能，且产品的各项性能均符合PVC板材国家标准GB／T4454－96。     

退火损伤对Er注入GaAs和Yb注入InP发光的影响

本文报道了CaAs∶Er、InP∶Yb发光样品的二次离子质谱、X-射线双晶衍射测量结果及其与Er离子的表面成份的关系.分析讨论了退火损伤对GaAs∶Er和InP∶Yb发光的影响以及Er~(3+)复合体发光中心模型.     

Instability of zeolite Y supported cobalt sulfide hydrotreating catalysts in the absence of H2S

Ion exchanged CoNaY was sulfided at 473 and 673 K and subsequently heated in He at 673 and 773 K. The resulting samples were characterized by means of overall sulfur analysis, temperature programmed Ar treatment and Fourier transform infrared spectroscopy. It was shown that during He flushing at sufficiently high temperature a protolysis reaction occurs resulting in the decomposition of Co sulfide into Co²⁺ ions and H₂S.     

原子高离化态研究装置

介绍了原子高离化态研究装置,包括重离子加速器、测量装置、数据获取和处理系统。     

1μm宽硅深槽刻蚀技术

介绍了硅深槽刻蚀的基本原理和影响刻蚀效果的几个主要工艺因素。提出了一种实现１μｍ宽的硅深槽刻蚀工艺途径；并给出了１μｍ宽、８μｍ深、侧壁及底部光洁的硅深槽刻蚀工艺条件。     

低能重离子及其碰撞产生的级联原子在生物材料中的直接作用范围

用Ｍｏｎｔｅ Ｃａｒｌｏ法模拟计算了３０ｋｅＶ和２００ｋｅＶ的Ｎ＾＋与１１０ｋｅＶ的Ｆｅ＾＋在模拟细胞中的射程分布和径迹结构，并将１１０ｋｅＶＦｅ＾＋模拟计算的结果与ＲＳＢ测量的结果相比较，发现计算与测量的结果吻合较好，离子的作用范围小于１μｍ。计算和实验的结果都说明能量相当低的重离子不大可能直接作用引起麦胚深层生物效应。     

Ge/Pd/n-GaAs低阻欧姆接触的SIMS分析

采用Ge／Pd／GaAs结构和快速热退火在n－GaAs上形成了低阻欧姆接触。利用H次离子质谱（SIMS）技术揭示和讨论了低欧姆接触形成的机理。比较了采用X 和CsX 信号检测的Ge，Pd，Ga和As的深度分布。结果表明采用CSX 可以提供更准确的结果和成分信息。     

分子结构对增塑聚氯乙烯性能的影响

研究了聚合度、分子量分布和支化结构对增塑聚氯乙烯加工流变性能和物理力学性能的影响。结果表明，增塑ＰＶＣ的加工流变性能随聚合度的增加而恶化；拓宽分子量分布和引入支化结构均有利于加工流变性能的提高；增塑ＰＶＣ的拉伸强度随聚合度的增加而提高，而压缩永久变形却随之减小；分子量分布对物理力学性能的影响不大；支化ＰＶＣ的拉伸强度略有下降。     

Experimental and mathematical studies of natural convection for solid-salt dissolution in water

The phenomena of natural convection caused by a concentration gradient usually creates currents as a result of buoyancy forces. These forces are formed from the combined effect of a fluid density gradient and the body force (gravitational force). The above phenomenon was studied experimentally in a circular glass column of 0.08 m diameter and 1 m length. This column was erected vertically and filled with distilled water with a salt bag placed on top of it and partially immersed in water. The dissolution mechanism was then modelled and a finite difference method was used to solve the formulated equations by using the implicit scheme of MacCormack (Anderson et al., 1984). The experimental results and the numerical predictions are represented graphically and give compatible agreement.