建筑围护结构与节能

针对我国夏热冬冷地区的建筑气候特点,对建筑围护结构节能在设计中的要点和意义进行了讨论。     

建筑结构爆破震动效应及安全分析研究

从现代爆破作用原理出发。对岩体爆破的振动特性，影响因素及最新研究进展作了综合评述。并通过大量科研观测资料分析。结合我国某些工程实践经验。着重介绍了岩土爆破对闸坝工程，水工隧洞的作用特性。破坏机制和安全准则。     

住宅建筑带钢副框铝合金门窗防渗漏施工技术

使用自粘性防水卷材对带钢副框的铝合金门窗窗边进行粘接,以防止雨水通过副框与墙体之间的缝隙渗漏到室内,重点介绍了详细的施工措施。     

Time‐dependent heat transfer coefficient of a wall

A time‐dependent coefficient of heat transfer is proposed for the computation of thermal power required, so that a room temperature reaches a desired value within a given time. A mathematical formulation of the room heating transient phenomenon is constructed in a dimensionless form. Using an integral approximate solution an analytical expression for this coefficient is provided and it is verified by diagrams adopted by DIN 4701. Copyright © 2003 John Wiley & Sons, Ltd.     

论智能化建筑

详细地阐述了智能化建筑的概念及其产生和发展、智能住宅的产生和发展，针对我国智能建筑发展存在的问题提出了建议，同时对未来的智能化建筑进行了展望，从而促进我国智能化建筑的发展。     

Empirical modelling of shear strength of RC deep beams by genetic programming

This paper investigates the feasibility of using genetic programming (GP) to create an empirical model for the complicated non-linear relationship between various input parameters associated with reinforced concrete (RC) deep beams and their ultimate shear strength. GP is a relatively new form of artificial intelligence, and is based on the ideas of Darwinian theory of evolution and genetics. The size and structural complexity of the empirical model are not specified in advance, but these characteristics evolve as part of the prediction. The engineering knowledge on RC deep beams is also included in the search process through the use of appropriate mathematical functions.The model produced by GP is constructed directly from a set of experimental results available in the literature. The validity of the obtained model is examined by comparing its response with the shear strength of the training and other additional datasets. The developed model is then used to study the relationships between the shear strength and different influencing parameters. The predictions obtained from GP agree well with experimental observations.     

Effect of electricity tariff on the optimum insulation-thickness in building walls as determined by a dynamic heat-transfer model

Thermal insulation is one of the most effective energy-conservation measures in buildings. Despite the widespread use of insulation materials in recent years, little is known regarding their optimum thickness under dynamic thermal conditions. Insulated concrete blocks are among the units most commonly used in the construction of building walls in Saudi Arabia. Typically, the insulation layer thickness is fixed at a value in the range 2.5–7.5 cm, regardless of the climatic conditions, type and cost of insulation material, and other economic parameters. In the present study, a numerical model based on a finite-volume, time-dependent implicit procedure, which has been previously validated, is used to compute the yearly cooling and heating transmission loads under steady periodic conditions through a typical building wall, for different insulation thicknesses. The transmission loads, calculated by using the climatic conditions of Riyadh for a west-facing wall, are fed into an economic model in order to determine the optimum thickness of insulation (L_opt). The latter corresponds to the minimum total cost, which includes the cost of insulation material and its installation plus the present value of energy consumption cost over the lifetime of the building. The optimum insulation thickness depends on the electricity tariff as well as the cost of insulation material, lifetime of the building, inflation and discount rates, and coefficient of performance of the air-conditioning equipment. In the present study, the effect of electricity tariff on the computed optimum insulation thickness is investigated. Different average electricity tariffs are considered; namely, 0.05, 0.1, 0.2, 0.3 and 0.4 SR/kWh (designated as Cases 1–5, respectively; 1 US$ = 3.75 Saudi Riyals). Results using moulded polystyrene as an insulating material show that the values of L_opt are: 4.8, 7.2, 10.9, 13.7 and 16.0 cm for Cases 1–5. Under the conditions of optimal insulation thickness for each electricity tariff, Case 1 gives the lowest total cost of 17.4 SR/m², while Case 5 gives the highest total cost of 53.1 SR/m². Corresponding thermal performance characteristics in terms of yearly total and peak transmission loads, R-value, time lag and decrement factor are presented.     

当前宁波地区住宅产品可持续发展浅析

文章从居住社区的规划设计和建筑设计两方面以低能耗的角度分析了城市居住功能的分布、社区住宅建筑布局的合理性、社区景观设置的合理性以及停车、中水处理与被动式太阳能住宅建筑的相关先进生态理念,希望通过居住社区的生态可持续性设计改善社区的舒适性和能源的可持续性.     

高层建筑结构设计的分析判断与优化

对高层建筑设计而言,设计前期的初步结构方案需通过结构软件的计算分析,判断该方案是否正确与合理,从而对其进行有针对性的修改和优化。文章结合具体实例,介绍了分析判断计算结果的主要几项内容及可采取的相应优化措施,从而可以提高设计的准确性和工作效率。     

用于气煤炼焦的新型直立炉

论述了陕西省子长气煤在新型直立炉炼焦的工艺过程及炉型特点，分析了产品质量及经济效益。