利用高铝矾土研制低温耐磨氧化铝瓷

着重介绍了以高铝矾土为主要原料的85瓷的合理配方和所采用的生产工艺，并对吸水率、体积密度、耐磨性、显微硬度、抗折强度和断裂韧性等物理性能进行了测试。还探讨了低温烧成机理、提高耐磨性的途径。结合显微结构分析了生产工艺对产品性能的影响。     

Crystalline morphology and isothermal crystallization kinetics of poly(ethylene terephthalate)/clay nanocomposites

A poly(ethylene terephthalate) (PET)/montmorillonite clay nanocomposite was synthesized via in situ polymerization. Microscopic studies revealed that in an isothermal crystallization process, some crystallites in the nanocomposite initially were rod‐shaped and later exhibited three‐dimensional growth. The crystallites in the nanocomposite were irregularly shaped, rather than spherulitic, being interlocked together without clear boundaries, and they were much smaller than those of neat PET. With Avrami analysis, the isothermal crystallization kinetic parameters (the Avrami exponent and constant) were obtained. The rate constants for the nanocomposite demonstrated that clay could greatly increase the crystallization rate of PET. The results for the Avrami exponent were consistent with the observation of the rodlike crystallites in the PET/clay nanocomposite during the initial stage. Wide‐angle X‐ray scattering and Fourier transform infrared studies showed that, in comparison with neat PET, the crystal lattice parameters and crystallinity of the nanocomposite did not change significantly, whereas more defects may have been present in the crystalline regions of the nanocomposite because of the presence of the clay. © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 94: 1381–1388, 2004     

Restricted chain segment mobility in poly(amide) 6/clay nanocomposites evidenced by quasi-isothermal crystallization

Modulated temperature differential scanning calorimetry is used to explore the interactions between a poly(amide) 6 matrix and various types of clay reinforcement. During quasi-isothermal crystallization of the polymer/clay nanocomposites, an excess contribution is observed in the recorded heat capacity signal, due to reversible melting and crystallization. It is proposed that the magnitude of this excess contribution can be used to qualify the polymer/clay interfacial interaction, as it is directly linked to the segmental mobility of the polymer chains in the interphase region, where both the crystalline and amorphous polymer fractions are affected. It is shown that the interfacial interaction strongly depends on the type of clay filler used. These interactions play a key role in the development of specific material properties for the different types of nanocomposites. A simple interphase model for the poly(amide) 6/clay nanocomposites is proposed.     

Study on the structure and properties of cyanate ester/bentonite nanocomposites

Cyanate ester (CE)/bentonite (BT) nanocomposites were prepared by melt blending of CE with NH₄⁺‐BT. The nanostructure of CE/BT nanocomposites was studied by X‐ray diffraction (XRD), scanning electron microscopy (SEM), and transmission electron microscopy (TEM). It was found that partially intercalated and partially exfoliated structures coexisted in CE/BT nanocomposites containing 2.5 wt % BT with respect to that of bulk CE. Below 2.5 wt % BT content, a totally exfoliated and disordered structure was formed in the nanocomposites. The exfoliated BT enhanced the toughness of CE/BT nanocomposites. The impact strength showed a maximum of 7.1kJ/m² at 1 wt % BT, compared to 3.8kJ/m² of pure CE. Furthermore, results of thermogravimetric analysis (TGA) suggest that CE/BT nanocomposites have higher thermal stability. © 2005 Wiley Periodicals, Inc. J Appl Polym Sci 96: 632–637, 2005     

蒸汽夹套管设计中需注意的几个问题

在石油、化工生产中 ,蒸汽夹套管作为保温管道类型之一常常在实际生产广泛运用。针对蒸汽夹套管在设计、安装中经常忽视的一些问题 ,分别从不同侧面加以比较分析 ,概括出它们在不同工况下的共同特点。在实际生产中 ,可有效提高管道运行的可靠性 ,降低投资     

利用广西气刀土原料研制高档卫生陶瓷

在对广西气刀土原料性能研究的基础上,进行了在卫生陶瓷坯料、釉料中的应用研究。坯料中加入4%～7%的广西气刀土原料替代等量的2#苏州土,在釉料中引入4～6%的气刀土原料替代1#苏州土,可以生产出理化性能和外观质量达到了美国ASMEA112.19.2M-1998标准要求的高档卫生陶瓷产品。引入广西气刀土原料使泥浆性能增强、厚化系数降低、湿坯硬度特别是内硬度明显提高、干坯抗折强度增大;制品体积密度增加、气孔率和吸水率降低;增强釉面乳浊效果、提高釉面白度,保证和提高产品的热稳定性能。     

Molecular design and characterization of catalysts for NO x selective reduction by hydrocarbons in the oxygen excess based upon ultramicroporous zirconia pillared clays

Approaches to design of zirconia pillared clays via control of the properties of pillaring species in solutions were elaborated. Structural features of pillars and Pt + Cu active components fixed at these nanoparticles were shown to determine catalytic properties of pillared clays in NO_x selective reduction by hydrocarbons in the oxygen excess.     

Charge reduction and regeneration in K+, Na+, Mg2+, Ni2+ and Co2+-exchanged Wyoming Bentonite

Controlled calcination of ion-exchanged Wyoming Bentonite in the presence and absence of ammonia leads to layer charge reductions. Detailed chemical analyses of both unexchangeable and exchangeable species lead to the conclusion that in no case is there migration of the original interlamellar cations into the octahedral region of the layers although, in terms of ionic radius alone, Mg²⁺, Ni²⁺ and, possibly Co²⁺, might be expected to do so. The production of unexchangeable Mg, Ni or Co, is identified as resulting from high temperature hydrolysis leading to hydroxide or oxide formation.     

温度影响下压实红粘土持水特性研究

通过渗析法和水汽平衡法研究不同温度控制下干密度1.7 g/cm~3压实红粘土持水特性(SWRC:soil water retention characteristics)。试验结果表明:20℃下干密度1.7 g/cm~3压实红粘土进气值约为110 k Pa;试样控制的温度越高,压实红粘土样持水能力越低,土样进气值随着温度升高而减小,且呈线性关系;Van Genuchten(1980年)土水特征模型能很好的描述干密度1.7 g/cm~3压实红粘土持水特性曲线。     

尺寸效应和约束条件对土基回弹模量的影响

室内承载板法是测定土基回弹模量的标准试验方法。尺寸效应和约束条件的影响使得室内测定的回弹模量往往与现场不符,不能直接用于公路结构设计。以红黏土为研究对象,采用室内试验和数值模拟的方法研究了试样的尺寸效应和约束条件对土基回弹模量的影响。结果表明:试样的尺寸效应(试样直径和高度)对回弹模量的影响较大,随着试样直径的增大回弹模量增大,随着试样高度的增大回弹模量减小;无侧限条件下测定的回弹模量乘以约束条件系数1.2即得有侧限条件下回弹模量值。研究成果为室内合理测定土基回弹模量值提供参考依据。