催化燃烧炉的节能性分析

传统的火焰燃气炉往往会产生不同数量的氮氧化物(NO和NO2)、一氧化碳等不完全燃烧产物,造成了环境污染和能源浪费.催化燃烧作为一种新的燃烧方式,打破了传统火焰燃烧的可燃界限,实现了贫甲烷/空气混合物在可燃界限以下的燃烧,燃烧效率高,提高了能源利用率.将催化燃烧应用于燃气炉,可以解决燃气炉由于火焰燃烧带来的燃烧效率低等缺点,达到节约能源的目的.以催化燃烧和燃气炉为依据,在催化燃烧炉Ⅰ型的基础上研制出催化燃烧炉Ⅱ型,分析了催化燃烧炉的热损失以及热效率,并与传统火焰燃烧炉做了比较.结果表明,催化燃烧炉Ⅱ型的热损失并不大,热效率较高,且其污染物排放量极低.     

10000m^3天然气球罐用WEL—TEN610CF钢焊接冷裂纹敏感性

WEL-TEN610CF钢是日本新日铁公司生产的低裂纹敏感性高强钢,结合我国首台国产化10 000 m3天然气球罐用37 mm厚WEL-TEN610CF钢焊接性试验研究,对该钢焊接冷裂纹敏感性进行了综合评定,为其焊接工艺的制订提供了可靠的依据。     

Evaluation of a system of wind tunnels for field studies of ammonia loss from grassland through volatilisation

Rates of ammonia (NH₃) loss from a ryegrass sward measured using a system of small wind tunnels were compared with concurrent measurements made using a micrometeorological mass balance method. Measurements were made during two experiments within a circular plot (radius 10m) treated with urea at a rate of 200kgNha^?1. In the first experiment, air speed through the tunnels was adjusted as necessary to maintain a value of approximately 1ms^?1. This value differed on most occasions from the mean ambient wind speed which was measured at a height of 250mm and which ranged from 0.61 to 2.95ms^?1. Rates of loss measured using the wind tunnels differed by a factor of between two and five from those measured using the mass balance method; there was no consistent pattern in the differences between the rates of loss. The total losses of NH₃ measured during 15 days were equivalent to 49.1 and 30.2kg Nha^?1 for the mass balance and wind tunnel methods, respectively. In the second experiment, air speed through the tunnels was adjusted as necessary to maintain a value as close as possible to the mean ambient wind speed measured at a height of 250mm. Rates of NH₃ loss measured using the two methods did not differ significantly; total losses of NH₃ during 17 days were equivalent to 96.9 and 101kg Nha^?1 for the mass balance and wind tunnel methods, respectively. The difference between the findings of the two experiments could be attributed to the direct effect of air speed through the tunnels rather than to differences between ambient temperatures and those inside the tunnels. During and following periods of rain the rates of loss measured using the tunnels were up to six times greater than those observed with the mass balance method. Rates of loss measured by the two methods became similar again when the tunnels were moved following rain. The study demonstrates that enclosures can be designed and operated to provide reliable measurements of the rate of NH₃ loss from grassland. Potential applications of the two methods are discussed.     

AVO反演预处理中的检波器非径向接收能量补偿.

 在地震勘探中，当炮检距非零时，检波器接收方向与反射波传播方向的夹角是非零的（即非径向接收），这一非零夹角必将产生能量损失，进而对AVO反演产生显著影响。为此本文根据Snell定律导出非径向损失补偿公式，以模型实例讨论了非径向接收对反射系数的影响，并提出了一种简单而有效的非径向能量损失补偿方法。对比用该方法做非径向损失补偿前后的AVO反演结果，其差异显著，说明本文方法能够明显改善AVO反演的质量。     

Carbohydrate content of potato (Solanum tuberosum L.) tubers treated with Isopropyl-N (3-chlorophenyl) carbamate under different storage conditions

Post harvest application of Isopropyl-N (3-chlorophenyl) carbamate considerably reduced the degradation of starch when potato tubers were stored in an evaporative cooling chamber. The starch degraded at a faster rate when tubers were kept under refrigerated and room storage conditions.     

河南油田提高难采储量动用程度的做法

河南油田主力开发区已进入高含水开发后期,后备资源接替严重不足成为制约油田发展的瓶颈。“九五”期间,河南油田加大了难采储量评价和动用的工作力度,按照“整体研究、系统解剖、优选目标、重点突破、滚动发展”的工作思路,对目标区进行综合地质研究,同时运用简易开发、大斜度定向井、稠油冷采等多种开采方式动用难采储量,使资源利用程度逐年提高。“九五”期间共系统开发难采储量437×104t,增加可采储量63.3×104t,建成原油生产能力6.6×104t。文中以张店、新庄油田为重点,探讨了提高难采储量动用程度的途径。     

热带城市垃圾典型组分的热解特性研究

对热带城市垃圾的几种典型组分进行了热解实验，得到了它们的失重曲线，通过对失重曲线进行分析，得到了这几种典型组分的热解规律，并通过建立热解动力学模型，求出了其中两种组分的活化能E和频率因子A。     

电火花铣削钛合金电极损耗在线补偿研究

根据电火花铣削等损耗理论，对用电火花铣削钛合金的加工中电极损耗补偿作了分析阐述。并根据正交试验的数据对理论分析结果进行对比，同时给出了一定的结论和建议。     

Dynamic-mechanical properties of polybutadiene rubbers

The dynamic properties of high-cis (98%) and cis-trans (42% cis) polybutadienes, crosslinked with 0.1 to 1.0% of crosslinking agent, have been studied using a torsion pendulum method over the temperature range ?170 to +20°C. For the high-cis rubber plots of damping factor (tan δ) against temperature showed the expected peak in the glass-transition region with an additional peak in the neighbourhood of 0°C attributable to crystallization. The cis-trans rubber showed two damping maxima in the transition region, separated by 30 to 40°C (depending on the degree of crosslinking), suggesting incipient phase separation of the component structures. The rebound resilience of the high-cis rubber at room temperature exceeded that of the cis-trans, reaching 92% at the highest crosslink density. Plots of resilience versus temperature for both rubbers showed a single minimum in the glass transition region.     

农电企业降损节能工作的探讨

阐述了农网降损节能的意义和技术上，管理上的有效措施，指出在线损管理中，只有将理论计算，准确统计，科学分析，营业管理和严打窃电等一系列办法有机地结合起来，才会有良好的效果。