紫杉醇母核全合成的初步思想实验

紫杉醇的全合成困难，许多工作还只能停留在实验室的模型化合物上。作者以思想实验方法提出了：先以Ｄ－Ａ反应形成Ａ环和Ｃ环，然后用两步形成Ｂ环，最后形成Ｄ环，以此完成紫杉醇母核的全合成。     

房地产开发企业会计核算问题探讨

本文就房地产开发企业会计核算的现状及特点进行了分析,并提出了完善房地产开发企业会计核算规范的对策。     

适用于LED显示屏或照明工程的异步控制卡DS2000-M1

DS2000-M1是高性能、开放式的LED控制系统,本文从软硬件两方面简述其设计原理。     

陶瓷材料的冷加工与热处理

综述评述最近发展起来的陶瓷材料的烧结后冷加工热处理法“控制破碎成形加工法”，着重介绍该方法的由业，阐明其理论与实验基础，同时，介绍其应用并讨论其发展前景。     

Analysis of a homologous series of non-reducing oligosaccharides from Arnica montana L. Roots

The oligosaccharide component compositions of a series of non-reducing oligosaccharides extracted from the roots of Arnica montana L. has been determined by gel permeation chromatography (g.p.c.). The range of oligosaccharides present was found to extend beyond the octasaccharide previously reported. with 16% to 19% of the oligosaccharides having a degree of polymerisation of between 11 and 19 and almost 3% having a degree of polymerisation greater than 20. The chromatographic behaviour of this series of oligosaccharides is compared with that observed for series of D-gluco-oligosaccharides.     

Ultrasonic study of molecular association of poly(vinyl chloride) solution in tetrahydrofuran

Ultrasonic absorption, velocity, adiabatic compressibility, relaxation time and relaxation amplitude measurements are reported on poly(vinyl chloride) (PVC) solution in tetrahydrofuran (THF) using pulsed ultrasonic apparatus operating at 2 MHz and 313 K. Results show a linear increase of velocity. density, viscosity, absorption coefficient, relaxation time and relaxation amplitude values with the increase of PVC concentration in THF. In contrast the compressibility decreases with increasing PVC concentration. This suggests interaction between PVC and THF molecules.     

石匣小流域坡地水土流失监测系统的建立及应用

以石匣小流域为坡地水土流失监测试点,以遥感及地理信息系统技术为手段,以坡地径流小区定位观测为依据,建立石匣小流域坡地水土流失监测系统,定位、定性、定量监测各种坡地类型的水土流失量、污染物流失量,为水土流失监测预报提供数据,为全市山区水土流失监测预报工作提供经验及方法,为制定水土流失防治方针政策及水土流失生态环境建设提供依据.     

High temperature low cycle fatigue

Fatigue at high temperature is a complex phenomenon as it is influenced by a number of time-dependent processes which become important at elevated temperatures. These processes include creep, oxidation, phase instabilities and dynamic strain ageing (DSA), acting either independently or synergistically influence fatigue behaviour, often lowering the fatigue life. Current design approaches employ linear summation of fatigue and creep damage with suitable factors on permissible damage to take care of uncertainties in interaction between cyclic and time-dependent processes. It is, therefore, important to develop a deeper understanding of the processes that occur during high temperature fatigue so that realistic life predictions could be made. Results on the high temperature fatigue behaviour of austenitic stainless steels, ferritic steels and nickel base alloys are presented here. The important mechanisms of interaction of high temperature time-dependent processes with fatigue under various conditions are discussed in detail. Emphasis is placed on cyclic stress response, fatigue life, deformation substructure and fracture behaviour. This is followed by a review of important life prediction techniques under combined creep-fatigue loading conditions. Life prediction techniques considered here include linear damage summation, strain range partitioning, ductility exhaustion approach, frequency modified and frequency separation methods, techniques based on hysteresis energy and damage rate models, and methods based on crack-cavitation interation models.     

High-Pressure (up to 140 MPa) Dynamic Viscosity of the Methane and Toluene System: Measurements and Comparative Study of Some Representative Models

The dynamic viscosity of toluene and methane mixtures containing 25.03, 37.19, 49.95, 64.11, and 95.00 mol% methane has been measured using a falling-body viscometer. The measurements (280 data points) have been performed in the temperature range 293.15 to 373.15 K and at pressures up to 140 MPa. The data have been discussed in the framework of recent representative models (hard-sphere scheme, friction theory, and free-volume model) as well as with simple mixing laws and empirical models (particularly the LBC model and the self-referencing model) used in the literature. This comparative study shows that the average absolute deviation of the models is between 4.9 and 26.8%, and the maximum deviation is between 11.6 and 49.5%.     

Drying of Chestnuts (Castanea sativa Mill.) after Osmotic Dehydration with Sucrose and Glucose Solutions

Chestnuts were dehydrated by using a combined method of osmotic dehydration followed by air drying. Samples were osmotically pretreated with sucrose (60% w/w) and glucose (56% w/w) for 8 h, air-dried at temperatures of 45, 55, and 65°C, at a relative humidity of 30% and at a velocity of 2.7 m·s^-1 and the experimental data of the drying kinetics were obtained. Whole samples were dried with different peelings: (a) removal of endocarp and pericarp (peeled) and (b) additionally the internal rough surface (cut). In all cases, cut chestnuts show greater drying rates than peeled samples, indicating that a significant mass transfer resistance in the layer nearest to the surface takes place. Peeled samples pretreated with sucrose solutions behave in a similar way to untreated samples. For the rest of the samples, the cut samples osmotically treated with sucrose solutions and all the samples treated with the glucose solution, the drying rates decrease during drying. Drying kinetics are successfully modeled by employing a diffusional model that takes the shrinkage into account. The effective coefficient of water diffusion was evaluated and correlated with temperature. The quality of the final product was monitored by color change. In spite of the fact that the total color difference is not modified by the osmotic treatment, the L*, a*, and b* color coordinates of cut samples treated with sucrose and glucose solutions do undergo changes; the L* and a* coordinates change less than the b*.