扩散渗析法从钛白废酸中回收硫酸

针对钛白废酸的回收,在静态扩散条件下测定了硫酸、硫酸亚铁在阴离子交换膜中的渗析系数以考察膜的分离性能。进一步考察动态扩散操作参数如流量、流量比、停留时间等对回收率及回收酸浓度的影响。研究表明,使用的阴离子交换膜具有良好的分离性能,酸盐分离系数达23.6,在水酸流量比维持在1～1.1,废酸流量维持在0.6L·h-1左右的条件下,硫酸回收率大于85%,硫酸亚铁透过率小于7%。     

中央空调的水处理

本文扼要介绍了中央空调循环冷却水和冷冻水系统中常见的问题及其原因,并对冷却水和冷冻水的处理程序作了初步的阐述.     

亚砜基改性纤维素膜的SO2气体渗透性能研究

分别使用二甲基亚砜浸泡的物理方法及苯基乙烯基亚砜加成的化学方法对纤维素膜进行了改性,并对改性膜的性能进行了测试.结果表明改性后纤维素膜仍为致密结构,SO2的渗透性能及其对N2的分离性能明显提高,其中改性液中添加二甲基亚砜的均相化学加成反应所得的改性膜具有较好的SO2渗透稳定性.     

Removal of chromium (VI) from dilute aqueous solutions by activated carbon developed from Terminalia arjuna nuts activated with zinc chloride

Different structured activated carbons were prepared from Terminalia arjuna nuts, an agricultural waste, by chemical activation with zinc chloride for the adsorption of Cr(VI) from dilute aqueous solutions. The most important parameter in chemical activation was found to be the chemical ratio (activating agent/precursor, g/g). Carbonization temperature and time are the other two important variables, which had significant effect on the pore structure of carbon. A high surface area of was obtained at a chemical ratio of 300%, carbonization time and temperature of 1 h and 500 °C, respectively. The activated carbon developed shows substantial capability to adsorb Cr(VI) from dilute aqueous solutions. The parameters studied include pH, adsorbent dosage, contact time, and initial concentrations. The kinetic data were best fitted to the Lagergren pseudo-first-order model. The isotherm equilibrium data were well fitted by the Langmuir and Freundlich models. The maximum removal of chromium was obtained at pH 1.0 (about 99% for adsorbent dose of 2 g/l and 10 mg/l initial concentration).     

纯化水系统中灭菌方法的应用及比较

分别采用二氧化氯溶液和臭氧水溶液对制药厂纯化水系统的贮罐和管道进行灭菌处理,比较灭菌效果和操作过程,最终认定臭氧水溶液灭菌方法在灭菌效率和水资源节约等方面优于二氧化氯溶液,适用于制药厂水系统管路、贮罐的灭菌处理.     

原水微量金属锰含量的测定

提出应用甲醛肟分光光度法测定原水中微量金属锰含量的方法,并对可能的干扰进行了讨论,对方法的精密度和准确度进行实验。此方法准确,简便,适用于公司竹浆生产选择含氧漂白工艺生产控制分析。     

In situ visualization of drop deformation,erosion, and breakup in high viscosity ratio polymeric systems under high shearing stress conditions

In this paper, deformation and breakup under simple shear of single molten polymer drops in a polymer matrix were investigated. Flow visualization was carried out in a Couette‐Flow apparatus under relatively high shear rates and temperatures up to 230°C. Drop/Matrix combinations were composed of polystyrene drops of 0.5–0.6 mm in diameter in polyethylene matrix, and ethylene–propylene copolymer drops of approximately the same size in polypropylene matrix. The deformation and breakup processes were studied under steady state and time‐dependent shearing conditions. Either for steady state or time‐dependant shearing conditions, drop elasticity generated at relatively high shear rates helped the drops to align perpendicular to the flow direction, i.e., parallel to vorticity axis. Also, the most striking non‐Newtonian effects for the high viscosity ratio systems were the surface erosion and the drop splitting mechanisms. The particles eroded off the main droplet surface were very fine, in the range of 10–50 μm, and led to a significant reduction in main drop size before its final breakup. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 100: 2582–2591, 2006     

洁净煤（水煤浆）用高效分散悬浮剂的制备

通过选用特定的小分子单体,采取分段聚合方式,合成具有特定官能团的化合物,用作水煤浆分散悬浮剂。     

聚丙烯的官能化及其与尼龙66相容性研究

对聚丙烯（PP）进行官能化，并研究了接枝单体含量，引发剂含量，螺杆转速对接枝率和熔体流动速率的影响。再将不同接枝率的PP与尼龙66共混，研究了接枝率对共混物力学性能及相容性的影响；用扫描电子显微镜观察了共混物的形态，与未增容共混体系相比，增容后共混体系分散相尺寸明显减小，增容共混物的形态依赖于增容剂在共混物中的含量，增容剂的分子量及官能化基团的含量。     

现代紫外C消毒技术在污水处理中的应用

本文介绍了紫外消毒技术的原理及系统组成等,并以福州经济技术开发区污水处理厂应用紫外消毒技术为例,探讨紫外消毒技术在污水处理中的应用,以杀菌效率及经济技术指标分析,表明紫外消毒技术具有高效广谱杀菌、运行稳定、安全可靠、占地面积小、成本低、大水量连续运行、无污染等特点.是其它传统的消毒手段所无法比拟的.