DECOUPLER DESIGN AND CONTROL SYSTEM TUNING BY INA FOR DISTILLATION COMPOSITION CONTROL†

Six distillation column models have been used in studies of the usefulness of the Inverse Nyquist Array (INA) method for design of dual composition control for distillation. Five of the column models are experimental, one describing an industrial column, the others four pilot plants. One column model is obtained by modeling from first principles.

The control strategies investigated and compared are multiloop SISO, 2-way decoupling and l-way decoupling. The control variables are the standard ones, i.e. reflux flow and boilup.

In most of the cases INA has been found to be a useful tool for design of the loops and for comparison of the different control approaches. INA has also been found to be useful for simultaneous tuning of the decouplers and the feedback controllers.

For 2-way decoupling the criterion to minimize interaction at the critical frequency for each primary feedback loop has been found useful in most, but not all, cases. The scheme can be designed by pure gains in the decouplers and there is no reason to introduce dynamics into the decouplers—the systems studied are already sufficiently rich in dynamics.

INA has been found to be a suitable vehicle for the choice between the two possible l-way decoupling schemes.

With the design approach taken, l-way decoupling has been found to provide considerably better control quality than 2-way decoupling in two of the six systems, the differences in control quality being small in the other cases.

The effect of model mismatching on the results, caused e.g. by process nonlinearities, is discussed and simple rules to decrease the parameter sensitivity for 2-way decoupling schemes are given. When model mismatching is considered, the advantage of l-way decoupling over 2-way decoupling seems to increase.

One deficiency of the INA design as used in this paper is that it does not single out the design which is to be preferred on the grounds of robustness.     

Quantum DCS系统及其应用体会

中国联合水泥公司3000t／d熟料生产线电气控制系统采用了法国施耐德公司的Quantum DCS系统，实现对全厂所有设备的工艺操作和控制。全面介绍了QuantumDCS系统的特点、功能系统构成网络，并详细总结了确保该系统稳定可靠运行的使用和维护的经验。     

浅谈一次盐水的工艺指标控制

介绍了一次盐水的各项工艺指标对生产的影响以及稳定控制这些指标的方法，强调了在生产中控制好一次盐水的工艺指标是影响产品质量及离子交换膜使用寿命的关键。     

世玛3%OF防除春麦田禾本科杂草药效试验

田间试验结果表明，用世玛225ml/hm^2 Genapol LRO 600ml/hm^2,40d对野燕麦（Auena fatua）、多花黑麦草（Lolium multiflorum)鲜重效果分别为88.1%、94.0%。对小麦安全，与对照比增产15.3%。     

高吸水聚合物材料在防沙治沙中的应用

介绍了高吸水聚合物的发展状况、吸水机理和性能特征，总结了合成高吸水聚合物及半合成高吸水聚合物的技术条件及若干种制备方法，并提出利用低成本植物纤维素（取自植物落叶、农作物茎杆等）、淀粉等天然原材料来制备高吸水性聚合物；探讨了以高技术、低成本、大面积可实施及效果显著为技术优势，利用高吸水聚合物进行荒漠和沙漠治理的方法和发展方向。     

锦纶66浸胶帘子布生产中的张力与控制

分析了帘子布生产中张力的作用及各区段的张力情况。张力应根据生产品种及浸胶帘子布的内在质量要求来选择，一般张力设定依据为拉伸区张力是干燥区张力的１倍，定型区张力是拉伸区张力的０．６５倍。同时应控制好各区段的温度，降低拉伸应力使锦纶６６帘子布拉伸均匀，提高帘子布的物理性能。     

低浓度的阴离子洗涤剂实验室内的质量控制

在环境监测中低浓度的阴离子洗涤剂实验室内质量控制应采取以下措施：空白试验值测定，检出限的确定，空白试验的质量控制图，校准曲线的检验，标准样品的测定。     

干熄焦循环气体成分的分析和控制

分析了干熄焦循环气体成分，针对可燃气体成分爆炸的极限值，控制及制定循环气体成分的指标。     

基于PLS快速剪枝法的RBF神经网络软测量模型建模方法和应用

提出一种从RBF神经网络隐含层的输出信息出发，通过PLS快速剪枝法，一次性剪去多余节点，生成最优规模的数学解析模型的方法。并用该方法建立了某化工企业精对苯二甲酸(PTA)晶体平均粒径的软测量模型，针对实际对象进行仿真研究，结果表明，该方法计算速度快，建立的模型精度高，适合实际工程应用的需求。     

CENTUM-CS1000在离子膜制碱工艺中的应用

介绍了DCS在离子膜制碱工艺中的应用及常用控制方案的实现和运行效果。