催化裂化再生器中铂助燃剂催化活性的测定(Ⅰ)——在新助燃剂上CO氧化的反应动力学

研究了催化裂化再生条件下铂助燃剂上ＣＯ氧化反应动力学。在排除了反应管及稀释剂的催化氧化作用后，测定了铂含量为１０－６ｇ／ｇ的国产新助燃剂上的反应动力学数据，得出了在氧过量时一氧化碳和氧的反应级数分别为１和０．５。给出了６６０℃下的反应速度常数值及其置信区间。     

催化裂解废旧不饱和聚酯树脂新技术

对不饱和聚酯树脂 (UPR)废料裂解制原料油技术进行了研究 ,系统地考察了催化裂解反应工艺条件。试验结果表明 ,催化裂解所需反应温度为 40 0～ 45 0℃ ,反应时间为 70～ 80min ;剂油比 1∶5 ;试验对 4种催化剂的催化性能进行了评价 ,研究表明单独使用YB -2催化剂 ,液相产品收率为 5 8.2 2%～ 5 9.1 4% ;YB -1和YB -2混合使用 ,最高液相产品收率为 68.76%。     

Evidence for non-site-isolation in ZSM-5 from ion-exchange and catalytic studies

Ion exchange of HZSM-5 samples with alkali metal cations, using metal chloride solutions, results in partially exchanged zeolites, MHZSM-5, M = Li, Na, K or Cs. The degree of exchange is found to increase with increasing ionic radius of the cations. The catalytic properties of the alkalized zeolites were evaluated using the reaction conditions under which the catalytic activity of the HZSM-5 samples in terms of n-hexane cracking is proportional to the aluminium content. From the residual catalytic activity exhibited by the Na-, K- and CsHZSM-5 samples it is concluded that each of the larger Na⁺, K⁺ and Cs⁺ ions is influencing more than one AlO ₄ ^– tetrahedron, implying that the aluminium sites in ZSM-5 are not isolated. The ion-exchange results are then interpreted in terms of non-isolated aluminium sites. The ion-exchange and catalytic properties of the zeolites as a function of aluminium content are also discussed.     

Mechanistic investigation of hydrogen-enhanced anodic dissolution of X-70 pipe steel and its implication on near-neutral pH SCC of pipelines

The effects of hydrogen-charging on anodic dissolution of pipe steel under near-neutral pH condition were studied by electrochemical techniques. Hydrogen-charging enhances the anodic dissolution rate of the steel. The hydrogen-enhanced dissolution increases with increasing charging current density. The hydrogen effect is attributed to the alteration of chemical potential and exchange current density of steel. Hydrogen-charging affects the corrosion process of the steel. In particular, at a high charging current density, a layer of corrosion product forms on the electrode surface to change corrosion potential and interfacial double-charge layer capacitance as well as charge-transfer resistance. The hydrogen effect factor for enhanced anodic dissolution of steel at an anodic potential of −0.4 V (SCE) is 1.53 only. Hydrogen-enhanced anodic dissolution of steel by itself may not be the major factor contributing to the high rate of crack growth in pipe steel in near-neutral pH electrolyte. A further investigation of the synergistic effect of hydrogen and stress on dissolution at the crack-tip is essential to determine the mechanism of near-neutral pH stress corrosion cracking of pipelines.     

降低催化汽油烯烃助剂LAP-1的应用实验

介绍了降低催化汽油烯烃助剂LAP－1在我厂的应用情况，该助剂在我厂催化装置上应用后，催化汽油的烯烃含量平均下降约4．5％，同时汽油的辛烷值也略有提高，总收率上升0．5％。     

乙烯裂解炉管内流动反应历程的数值模拟(Ⅰ)二维流动反应数学模型的建立

引　言乙烯生产装置的核心部分是管式裂解炉 ,在小口径反应管内进行着湍流流体流动、传质、传热及裂解反应等过程 ,它们高度耦合在一起 ,其内部有许多十分重要的化学工程参数均不易测得 ,这就使得对管式裂解炉运行机制与规律的了解和认识及其性能的优化变得十分困难 .但是 ,乙烯工业的发展所带来的经济效益又迫使人们要了解和掌握这一复杂过程 ,优质高效地设计、操作和优化乙烯管式裂解炉 .近 10多年来 ,利用流动反应数学模型较准确地描述和模拟上述复杂过程 ,证明是管式裂解炉设计改进与优化操作行之有效的途径[1] .乙烯裂解炉反应管的工艺…     

压痕残余应力对氮化硅基复合材料阻力曲线行为的影响

通过压痕小裂纹直接量测法获得了ＴｉＣ，ＴｉＮ／Ｓｉ３Ｎ４复合材料的阻力曲线，采用更具合理性的指数经验公式拟合处理实验数据，初步探讨了Ｋ∞，Ｋ＾＊Ｒ，ΔＣ，等参数的物理意义。对压痕残余应力消除前 实验结果进行比较，发现压痕残余应力的消除，提高了材料的极限断裂韧性值Ｋ＾＊Ｒ，却大大减少了裂纹稳态生长的容限，使得材料的脆性行为更为突出。     

Chemical Reaction Engineering and Research and development of gas solid systems

A general procedure is proposed for innovative research and development of gas-solid reactor systems, with a brief explanation of the significance of each step in the procedureBased upon the contacting mode between gas and solid phases, as well as the ways of supplying thermal energy to the reacting regions, various types of gas-solid reactor systems are classified by using tables of so called “matrix” form, for thermal cracking and gasification of heavy oils, gasification of coal, gasification of solid waste, calcination of limestone, clinkering of cement and reduction of iron ore.The importance of fundamental concepts is emphasized for successful research and development by presenting several examples; namely, calcination of limestone, thermal cracking of heavy oils and gasification of solid waste materials.In connection with the direction in which fundamental research should be oriented, four primary ways of thinking are proposed, which can be applied to obtain innovative ideas for further research and development in this field.One example of the author's practical experience was selected to show the role of the fundamental research in the course of large scale development. Finally the author outlines the role of chemical reaction engineering to innovate the novel gas-solid reactor systems which may be inevitable for simultaneous solution of the three big E's; namely, Energy, Environment and Economy.     

SC-1型乙烯裂解炉先进控制系统开发与应用

针对SC-1型乙烯气液相裂解炉控制问题,提出了一种鲁棒性较强的先进控制策略,开发了由“DCS控制层”和“上位机控制层”构成的先进控制系统.该系统有效地解决了燃料热值波动对裂解炉裂解气出口温度的影响,减少了裂解气出口温度和裂解炉总加工量的波动,实现了“卡边”控制及生产过程的安全逻辑保护,优化控制器可一键投运和切除,解决了裂解炉控制问题的复杂性.该系统成功应用于兰州石化46万吨／年乙烯装置,大幅度提高了装置的平稳率,提升了双烯收率,降低了装置能耗.     

Relative reactivities of alkanes in multi-component catalytic cracking reactions

An experimental technique is discussed for measuring relative reactivities of alkanes in the catalytic cracking of multi-component hydrocarbon mixtures over a heterogeneous, Y-zeolitebased catalyst at 250–350 °C. With the technique, ca. 0.1 l of an alkane mixture is evaporated and contacted with a catalyst, after which the mixture of reaction products and the unreacted feed enters the chromatographic column and is immediately analyzed. The technique is used to measure relative reactivities of 21 alkanes in a single experiment. The principal results of these experiments are similar to the results of single-component cracking: alkane reactivity rapidly increases with the increase of the carbon number, and methyl-branched alkanes are more reactive than linear alkanes. However, the variations in alkane reactivities as a function of their molecular weight and skeleton structure differ very significantly between single- and multicomponent experiments.