酚醛胺(T-31)环氧树脂固化剂之浅谈

介绍了酚醛胺(T-31)系列环氧固化剂及原料的现状和特点,并对酚醛胺(T-31)系列环氧固化剂进行了分代,阐述了第三代酚醛胺(T-31)系列环氧固化剂的系列化、专用化、高档化。预测和展望了2005年的需求和方向。     

Role of sand on curing of partex surface by UV radiation

A partex surface was modified by a UV‐curing system with epoxy acrylate (EB‐600). A set of formulations was prepared with oligomer and the trifunctional monomer trimethylol propane triacrylate in different combinations of percentages (1–5%) of sand to study the role of sand in various physical properties of UV‐cured thin films, as well as partex surfaces. Increased pendulum hardness (PH), gloss, adhesion, and abrasion values were obtained by the addition of sand into the partex surfaces. The best results were obtained with the formulation containing 3% sand. An enhanced PH and a decreased percentage of gel content of the UV‐cured film was observed with an increase of the sand concentration. A simulated weathering test was performed with partex surfaces cured by a formulation containing 3% sand in the base coat. The losses of the physical properties were found to be lower over the surface treated with the formulation containing sand. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 86: 2385–2392, 2002     

硫化机网络群控系统

对硫化机群采用分散控制-集中管理式中央监控系统.系统分底层网络和上层网络两部分.底层网络分二级控制,采集现场硫化机温度、压力等参数.上层网络用于对生产数据进行处理显示、打印报表等.各层控制系统实现相对独立,该系统运行多年,未发生异常现象.     

FTIR光谱法原位快速跟踪不饱和聚酯树脂的固化反应

用富里哀变换红外光谱法原位跟踪不饱和聚酯树脂固化反应的动态过程。该方法能直接反映分子结构的变化,迅速准确地采集数据,尤其适用于快速反应体系。     

MFE环氧乙烯基酯树脂固化性能的研究

本文对MFE环氧乙烯基酯(含MFE型和AFE型二种型号)树脂的固化性能(凝胶时间、放热峰和固化收缩率)作了报道并进行讨论。     

Glass‐transition temperature in the curing process of bismaleimide modified with diallylbisphenol A

The T_g‐conversion relationship, during the thermal curing of different stoichiometric formulations of 1,1′‐(methylene‐di‐4,1‐phenylene) bismaleimide (BMI), modified with o,o′‐diallyl bisphenol A (DABA), was investigated. The DiBenedetto equation was used to model this relationship for the formulation of DABA‐1 (BMI : DABA, 1 : 1). Based on this model, the T_g‐conversion relationship of formulation DABA‐0.5 (BMI : DABA, 1 : 0.5) was modeled. The high consistency between the model curve and experimental data showed that the change of T_g, attributed to copolymerization between BMI and DABA in DABA‐0.5, in the low‐conversion regime, was the same as that in DABA‐1. This also verifies that, for the formulation DABA‐0.5, copolymerization and homopolymerization do not overlap with each other. The reactions progressed sequentially and homopolymerization occurred after completion of copolymerization. © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 91: 3244–3247, 2004     

探讨低温固化涂料固化剂的选用

选择了国内外几种环氧固化剂,配制成环氧树脂涂料,比较了环氧涂料的物理性能和防腐性能,考察了环氧涂料在不同温度下的固化情况,探讨了固化剂对低温施工性能的影响。     

Lignin‐based polycondensation resins for wood adhesives

Lignin‐based wood adhesives are obtained that satisfy the requirements of relevant international standards for the manufacture of exterior‐grade wood particleboard. Formulations based on low molecular mass lignin and presenting an increase in the relative proportion of reactive points yield better results than the higher molecular mass lignin used in the past. These lignins allow a higher proportion of hydroxymethylation during preparation of methylolated lignins. These lignin‐based adhesives also yield acceptable results at particleboard pressing times that are sufficiently low to be of industrial significance. Lignin‐based wood adhesives, in which a nonvolatile nontoxic aldehyde (glyoxal) is substituted for formaldehyde in their preparation, are prepared and tested for application to wood panels such as particleboard. The adhesives yield good internal bond strength results for the panels, which are good enough to comfortably pass relevant international standard specifications for exterior‐grade panels. The adhesives also show sufficient reactivity to yield panels in press times comparable to that of formaldehyde‐based commercial adhesives. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 103: 1690–1699, 2007     

环氧树脂/滑石粉、纳米蒙脱土水下胶粘剂研究

主要研究了滑石粉、有机化处理蒙脱土作为填料对水下环氧胶粘剂拉伸剪切强度的影响及蒙脱土与滑石粉协同作用效果,依此推荐了水下环氧胶粘剂的组份。     

Effects of resin chemistry on redox polymerization of unsaturated polyester resins

Unsaturated polyester resins are the most widely used thermoset resins in the composite industry. In this study, three well‐defined unsaturated polyester resins were used. These resins have similar number‐average molecular weights, and they have different numbers of C?C bonds per molecule. The reaction kinetics of unsaturated polyester resins was studied using a differential scanning calorimeter (DSC) and a Fourier transform infrared (FTIR) spectrometer. The glass transition temperature of the isothermally cured resin was also measured. Trapped radicals were observed in the cured polyester resin from electron spin resonance (ESR) spectroscopy. Considering the diffusion‐limitation effect, a simple kinetic model was developed to simulate the reaction rate and conversion profiles of polyester vinylene and styrene vinyl groups, as well as the total reaction rate and conversion. Experimental results from DSC and FTIR measurements compare favorably with the model prediction. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 84: 211–227, 2002; DOI 10.1002/app.10317