拉普拉斯变换的图形分析

以单边指数函数为例，分析了拉普拉斯变换象函数F(s)在其收敛域内随σ和ω的变化规律，通过|F(s)|曲面图来观察这些规律，并解释了图中某些特定点及剖面的含义，以形象化的方式加深对拉普拉斯变换的认识。借助MATLAB的绘图功能绘制出F(s)的曲面图、剖面图及信号的频谱图，从中可以观察到频域与复频域的关系以及系统函数的零极点分布等。     

集中载荷作用下的套管抗挤能力分析

根据油田套管损坏情况,建立了集中载荷作用下的套管抗挤能力计算模型,利用能量法和曲杆理论,分析研究了承受180°对称分布集中载荷、90°均匀分布集中载荷和120°均匀分布集中载荷下中厚壁套管抗挤能力,得出了理想圆管抗挤强度和套管屈曲临界挤毁压力的计算公式,通过分析比较理论解与有限元解,其最大相对误差不超过1%,得出了套管抵抗局部载荷的能力低于抵抗均布载荷的结论。     

Small Noncoding RNAs in Knee Osteoarthritis: The Role of MicroRNAs and tRNA-Derived Fragments

Knee osteoarthritis (OA) is a degenerative knee joint disease that results from the breakdown of joint cartilage and underlying bone, affecting about 3.3% of the world’s population. As OA is a multifactorial disease, the underlying pathological process is closely associated with genetic changes in articular cartilage and bone. Many studies have focused on the role of small noncoding RNAs in OA and identified numbers of microRNAs that play important roles in regulating bone and cartilage homeostasis. The connection between other types of small noncoding RNAs, especially tRNA-derived fragments and knee osteoarthritis is still elusive. The observation that there is limited information about small RNAs different than miRNAs in knee OA was very surprising to us, especially given the fact that tRNA fragments are known to participate in a plethora of human diseases and a portion of them are even more abundant than miRNAs. Inspired by these findings, in this review we have summarized the possible involvement of microRNAs and tRNA-derived fragments in the pathology of knee osteoarthritis.     

180°矩形弯管流场的实验测量和数值模拟

对180°矩形弯管内的湍流流场用智能型五孔球探针进行了测量，同时采用FLUENT 6.2对其进行数值模拟。流场测量和数值模拟结果表明：180°矩形弯管由于流体旋转产生的离心力导致了弯管内压力分布的变化，使弯管内切向速度发生变化。切向速度在流体开始旋转0°~60°区间内侧的速度增大、压力减小，外侧的速度降低、压力增大；当转过60°截面后，外侧的速度增大、压力减小，内侧的速度降低、压力增大。     

Tests and numerical simulation on curved blade of super-critical adjust stage

Tests and numerical simulations of super-critical adjust stage blade were carried out and the effect of bowed blade on flow characteristics and the secondary flow were analyzed. The simulation and test results show that the adjust stage blade with aft-loading and big front-edge radius has good flow characteristics by meridian shrink. The numerical studies were carried out with software of NUMECA in order to investigate the aerodynamic characteristics of adjust stage blades,which include prototype blade(tested blade) ,positive curved blade (15°) and negative curved blade(-15°) . The simulation results show that the positive curved blade forms a negative static pressure gradient in the lower region of the cascade along the blade height and a positive static pressure gradient in the upper region. This leads to the reduction of the streamwise vortices intensity and the aerodynamic load on both sides of the blade and the endwall. Therefore,the crosswise secondary flow losses of endwall can be decreased considerably.     

各向异性介质涂覆曲面导体目标的散射

由于各向异性介质电磁参数为张量形式,使得各向异性介质涂覆导体目标的电磁散射建模和精确计算相当复杂和困难.引入高阶张量阻抗边界条件,可以大大简化建模过程,提高计算效率.论文针对各向异性介质涂覆曲面导体目标,采用基于平面近似的高阶张量阻抗边界条件,将一维二阶张量阻抗边界条件应用于柱面涂覆目标,二维二阶张量阻抗边界条件应用于三维曲面涂覆目标上,建立二者的高阶张量阻抗边界条件解.设计算例仿真,并与精确解/矩量法解比较.通过仿真,研究了各向异性介质涂覆目标电尺寸、涂覆厚度以及目标形状对高阶张量阻抗边界条件解的精度的影响.     

Numerical study on the restriction speed of train passing curved rail in cross wind

The results of numerical investigations of aerodynamic forces and moment coefficients of flow passing a simplified train geometry under different wind speeds are summarized. To compute numerically the different coefficients, the three-dimensional Reynolds-Averaged Navier-Stokes (RANS) equations, combined with the k-ε turbulence model, were solved using finite volume technique. The pres-sure-velocity fields were coupled using the SIMPLE algorithm. At each iteration the pressure correction was obtained by sol...     

Equilibrium equations for nonlinear buckling analysis of drill-strings in 3D curved well-bores

With the development of drilling technology, the oil/gas well has evolved from its early vertical straight form to the inclined, horizontal, plane curved, or even 3D curved well-bore. Understanding of the buck-ling behavior of a drill-string in a well-bore is crucial for the success of a drilling operation. Therefore, equilibrium equations for analyzing the buckling behavior of a drill-string in a 3D curved well-bore are required. Based on Love’s equilibrium equations for a curved and twisted rod in space, ...     

多高层框排架-支撑结构减震设计及试验研究

为了解决多高层框排架-支撑结构存在的抗震能力较弱、出现薄弱层等问题,以某典型多高层框排架-支撑结构为实例,基于防屈曲支撑( buckling-restrained brace, BRB)消能减震技术设计了3种减震方案,并通过有限元软件对原结构及各方案进行了弹塑性分析。分析结果表明：3种方案均可改善层间位移角分布,提高结构抗震性能,其中降刚度方案的经济性及减震效果均较好。按1：10缩尺比例分别设计制作原结构及降刚度方案试验模型,通过静力往复加载试验,验证了减震方案提高结构阻尼比及抗震性能的效果。