Buckling of moderately thick laminated cylindrical shells: a review

The present paper is a review article on the problem of buckling of moderately thick, laminated, composite shells subjected to destabilizing loads. The loads consist of uniform axial compression, uniform lateral pressure and torsion applied individually or in combination. In all the works reported in the literature, the analysis is based on higher-order shear deformation (HOSD) shell theory and/or first-order shear deformation (FOSD) shell theory with or without a shear correction factor. Results obtained by these two shell theories and by employing classical thin shell theory are compared to determine the range of applicability of each in predicting critical conditions. The effect of stacking sequence, radius-to-thickness ratio and length-to-radius ratio is assessed. Typical numerical results are presented in tabular form. Moreover, some limited results, which are based on limit point analysis are also presented (imperfection sensitivity studies).     

复杂结构六联筒仓控制爆破拆除

采用定向爆破拆除了某厂房6联体砖混筒仓,该筒仓立筒相互连接处由钢筋混凝土柱与砖混材料组成且形状不规则.介绍了筒仓爆破切口尺寸计算、复杂结构部位的爆破参数设计和预处理措施.取得了理想的爆破效果,为同类构筑物的爆破拆除提供了参考和依据.     

玄武岩纤维布增强树脂基复合材料约束高温损伤混凝土轴压力学性能

对36个玄武岩纤维布增强树脂基复合材料（BFRP）约束加固的高温损伤混凝土圆柱体和15个不同高温损伤的对比试件进行了轴压试验。试验表明,BFRP侧向约束能显著改变混凝土圆柱体的破坏形态,提高混凝土圆柱体的轴压强度和变形能力。其中二层BFRP包裹的200℃、400℃、600℃和800℃高温损伤混凝土圆柱体的轴压强度分别提高了56%、82%、234%和250%,轴向变形分别提高了328%、198%、232%和136%。采用典型的纤维增强复合材料约束常温未损伤混凝土轴压强度和变形计算模型预测纤维增强复合材料约束高温损伤混凝土轴压极限强度和极限变形时存在较大的偏差。基于本文试验数据,确定了BFRP约束高温损伤混凝土极限应力和极限应变计算模型中与温度相关的参量,建议了适用于预测纤维增强复合材料约束高温损伤混凝土的极限应力计算模型和极限应变计算模型。     

Microfluidic Design of Magnetoresponsive Photonic Microcylinders with Multicompartments

Colloidal photonic structures have been designed to have granular format to use them for paint pigments, encoded carriers, and display pixels. However, conventional approaches only provide spherical or discoid shapes, restricting their applications. Cylindrical granules with fan‐shaped compartments in the cross section are appealing for microcarriers with abundant optical codes and active display pigments for color switching. In this work, a stratified laminar flow of concentrated silica particles is employed, formed in a cylindrical microchannel, to produce cylindrical photonic microparticles with multiple compartments. To accomplish this, a microfluidic device is designed to have one cylindrical main channel connected with four branch channels. Four different photocurable suspensions are independently injected through the branches to form quarter‐cylindrically compartmentalized streams in the main channel. Local ultraviolet irradiation on the main channel polymerizes the suspension, thereby forming cylindrical microparticles with four compartments. In each compartment, silica particles form ordered array which develops particle size–dependent structural color. Therefore, different colors can be incorporated into single microcylinder by employing different sizes of silica particles. Moreover, one of the compartments can be rendered to be magnetoresponsive by embedding aligned magnetic particles, which enables the remote control of microcylinder orientation and therefore the switching of structural colors.     

Investigation on carbon nanomaterials: Coaxial CNT-cylinders and CNT-polymer composite

The macroscopic coaxial carbon cylinders (dia. ∼0.5 cm with varying lengths, ∼ 7–10 cm) consisting of aligned carbon nanotube (CNT) stacks have been prepared by controlled spray pyrolysis method. The coaxial carbon cylinders of CNT stacks have been formed directly inside the quartz tube. Another study is done on multi-walled CNTs (MWNTs)-polymer (e.g. polyethylene oxide (PEO), polyacrylamide (PAM)) composite films. We have investigated the structural, electrical and mechanical properties of MWNTs-PEO composites. Composites with different wt% (between 0 and 50 wt% of MWNTs) have been prepared and characterized by the scanning electron microscopic technique. Enhanced electrical conductivity and mechanical strength were observed for the MWNTs-PEO composites. We have also studied the electrical property of MWNTs-PAM composite films.     

Numerical Study of Particle Dispersion in the Wake of Two Tandem Square Cylinders Using Discrete Vortex Method

This study has been conducted to investigate numerically the particle dispersion in the wake of dilute particle-laden gas flows past two identical square cylinders in tandem arrangement at Reynolds number of 10,000,000. In the numerical method, the discrete vortex method is employed to calculate the gas flow fields, and the Lagrangian approach is applied to track individual solid particles. A dispersion function is defined to represent the lateral dispersion scale of particles. The wake vortex patterns and the distributions of particles with various Stokes numbers ranging from 0.01 to 10 are obtained. The numerical results reveal that: (1) the particles with St = 0.01 can distribute both in the vortex core and around the vortex periphery, whereas the particles with St = 1.0, 10 congregate mainly around the vortex periphery; (2) the particles with St = 0.01, 0.1 are trapped by the vortices into the gap between the two square cylinders, while very few particles with St = 1.0, 10 are distributed within the gap; (3) the particle's dispersion intensity along the lateral direction decreases greatly as St is increased from 0.01 to 10.     

反应烧结碳化硅陶瓷内筒的损毁机制

以X射线衍射仪、扫描隧道电子显微镜、能量散射光谱仪等手段对在悬浮预热器内筒上使用前后的反应烧结碳化硅陶瓷进行分析,研究该陶瓷应用于悬浮预热器上的损毁机制.碳化硅陶瓷中残存金属硅和表面的碳化硅在高温使用工况下首先氧化成SiO₂,SiO₂在K₂O (g)、Na₂O (g)、KCl (g)、Na Cl (g)等蒸气以及氯化物作用下黏度降低,形成覆盖于陶瓷表面的氧化层,继而被高速的气固流体冲蚀和磨损掉,并导致新的界面出现.如此循环,使碳化硅陶瓷的外侧逐渐变薄和断裂,直至损毁.提高陶瓷的致密性和降低残余硅含量是改进反应烧结碳化硅陶瓷在悬浮预热器中使用性能的有效途径.     

Effect of fiber orientation on the structural behavior of FRP wrapped concrete cylinders

In this study, 27 concrete cylinders with a diameter of 152.4 and a height of 304.8 mm were prepared. Among them, 18 cylinders were wrapped using two layers of fiber reinforced polymer (FRP) with six fiber orientations; six cylinders were wrapped using four layers of FRP with fibers in axial or hoop direction only; the remaining three cylinders were used as control. The FRP used was E-glass fiber reinforced ultraviolet (UV) curing vinyl ester. Fifteen coupon specimens were prepared to experimentally determine the tensile strength of the FRP with fibers oriented at 0°, 45°, and 90° from the loading direction. Co-axial compression tests were conducted on the wrapped cylinders and control cylinders. The test results were compared with existing confinement models. It is found that the strength, ductility, and failure mode of FRP wrapped concrete cylinders depend on the fiber orientation and wall thickness. Fibers oriented at a certain angle in between the hoop direction and axial direction may result in strength lower than fibers along hoop or axial direction. A larger database is desired in order to refine the existing design-oriented confinement models.     

临界雷诺数区串列圆柱在均匀流中响应实验研究

本文在4.19×10~4相似文献   

轴类镀层结构材料力学性能声学表征方法研究

针对轴类镀层结构材料力学性能无损表征方法开展理论和实验研究,对于表面工程的质量检测与评价具有重要意义。利用自主开发的超声显微测量系统与PVDF线聚焦探头,对不同厚度的轴类镀层材料进行散焦测量。针对轴类试件表面波传播路径与散焦距离的非线性关系,分析了线聚焦探头几何尺寸与散焦距离和试件轴径间的匹配关系,优化检测参数,并在V(f,z)分析法的基础上,采用相位相关分析法获得轴类镀层材料的实验频散曲线。结合镀层材料声波传播特性,采用基于模拟退火的粒子群优化算法(PS-B-SA)将理论频散曲线与实验频散曲线相拟合,反演轴类镀层结构材料的声学参数,进而表征镀层材料的弹性常数。多个不同厚度轴类镀层结构材料弹性常数及镀层厚度的反演结果与实际值相吻合,表明该测量方法可靠、结果准确。该研究成果为轴类镀层结构力学性能无损检测提供了技术手段,也为工程材料表面工程加工性能的评价提供了新方法。