Influence of base resistance on extracting thermal resistance for SiGe HBTs

In this article, the influence of base resistance on extracting thermal resistance for SiGe heterojunction bipolar transistors is studied and an improved approach for determining the junction temperature and thermal resistance is presented. The proposed method for extracting thermal resistance is based on the temperature sensitivity of the base–emitter (B–E) voltage when the device is biased with a fixed emitter current density. This approach not only takes into account the self‐heating during the different ambient temperature measurement but also revises the empirical equation of B–E voltage due to the influence of base resistance during the power dissipation increment measurement. Results are obtained for devices with different emitter lengths and fingers. Compared with the conventional method, the thermal resistance is about up to 15% improvement for the device with 0.3 × 1.9 μm² emitter area and 13.8% for the device with 0.3 × 13.9 μm² emitter area. The accurate thermal resistance implemented in HICUM model has resulted in better fit for transistor output characteristics. © 2012 Wiley Periodicals, Inc. Int J RF and Microwave CAE, 2012.     

Measurement of the heat of fusion of titanium and a titanium alloy (90Ti-6Al-4V) by a microsecond-resolution transient technique

A microsecond-resolution pulse heating technique was used for the measurement of the heat of fusion of titanium and a titanium alloy (90Ti-6Al-4V). The method is based on rapid (50- to 100-s) resistive self-heating of the specimen by a high-current pulse from a capacitor discharge system and measuring, as functions of time, current through the specimen, voltage across the specimen, and radiance of the specimen. Melting of the specimen is manifested by a plateau in the measured radiance. The time integral of the net power absorbed by the specimen during melting yields the heat of fusion. The values obtained for heat of fusion were 272 J · g^–1 (13.0 kJ · mol^–1) for titanium and 286 J · g^–1 for the alloy 90Ti-6Al-4V, with an estimated maximum uncertainty of ±6% in each value.Paper presented at the Second Workshop on Subsecond Thermophysics, September 20–21, 1990, Torino, Italy.     

A new microsecond pulse-heating system to investigate thermophysical properties of solid and liquid metals

A new discharge system for resistive self-heating has been constructed for the measurement of accurate thermophysical properties. A constant-current pulse is used to heat metals over a time interval of 50 to 100 s, reaching temperatures up to the boiling point. New techniques have been developed to obtain sound speeds in the pulse-heated sample, emissivities, and vapor pressure. A new pyrometer allows the extension of the measured temperature range down to the melting point of copper.     

燃煤锅炉供热系统的模糊控制

介绍燃煤锅炉供热系统的自动化节能模糊控制方案,燃煤锅炉供热系统是一个大惯性的滞后系统,传统的单纯PID控制效果不理想,而基于工人熟练的经验和专家知识的模糊控制能够达到比较好的效果。系统中对控制参考量水温和炉膛负压这两个输入量模糊化处理,由控制规则推出输出模糊子集,再应用模糊推理合成规则得出PID的系数,PID控制器根据输出量来控制鼓风机、引风机、炉排电机和水泵的变频器。     

Thermal expansion of molybdenum in the range 1500–2800 K by a transient interferometric technique

The linear thermal expansion of molybdenum has been measured in the temperature range 1500–2800 K by means of a transient (subsecond) interferometric technique. The molybdenum selected for these measurements was the Standard Reference Material SRM 781 (a high-temperature enthalpy and heat capacity standard). The results are expressed by the relation where T is in K and l ₀ is the specimen length at 20°C. The maximum error in the reported values of thermal expansion is estimated to be about 1% at 2000 K and not more than 2% at 2800 K.Paper presented at the Ninth Symposium on Thermophysical Properties, June 24–27, 1985, Boulder, Colorado, U.S.A.     

Photothermal radiometric detection and imaging of surface cracks

This paper discusses surface crack detection by photothermal radiometric imaging (PRI). In PRI, also called dynamic infrared scanning, a surface is scanned with a spot of heat. Imperfections are detected by radiometrically sensing changes in the surface temperature of a small area in the vicinity of this spot. In the work described, cracks narrower than 25 µm (0.001 in.) in a lightly rusted steel surface have been detected. Indiscrete scanning an amplitude modulated heating beam is moved in steps, remaining at each location long enough to measure amplitude and phase of the AC temperature. Incontinuous scanning a constant intensity heating beam is moved continuously while the temperature deviations are measured. This paper presents methods of calculating amplitude and phase of surface temperature for discrete scanning and instantaneous temperature for continuous scanning across a surface crack. For a steel surface scanned by a watt-level laser beam, predicted surface temperature deviations when crossing the crack are several degrees Celsius, with expected radiometrically detected power several orders of magnitude above the detector noise. In experiments performed, both techniques easily detected narrow cracks in a smooth, clean surface. Discolorations and pits, on the other hand, generate a disturbing type of surface noise. This noise was minimized by differential detection. Based on results obtained, continuously scanned PRI with a fan-type heating beam and array detection could become a viable way of mapping surface cracks at practical scanning speeds.     

含蓄热式电采暖的综合能源系统日前优化调度策略研究

以含蓄热式电采暖的综合能源系统日前优化调度运行问题为研究对象,分析了蓄热式电采暖系统运行的各种特点,建立了含蓄热式电采暖的综合能源系统运行优化调度模型。将某典型蓄热电采暖用户场景作为算例进行验证,结果表明通过对蓄热式电采暖运行情况进行优化,可以有效降低其对电网的负荷冲击,减小电网峰谷差,提升电采暖设备的使用效率,大幅降低用户采暖的运行费用。该方法可为蓄热式电采暖用户参与和电网互动、促进可再生能源消纳、提升采暖系统经济运行水平、降低电网峰谷差以及促进蓄热式电采暖系统推广等提供参考依据。     

含冰蓄冷空调的CCHP微电网优化调度

冷热电联供(CCHP)型微电网作为综合能源系统的基本物理构成,可实现可再生能源的消纳和多能互补,是实现能源可持续发展和改善生态环境的重要手段。考虑经济性和环保性,以综合运行成本最小为目标,搭建了含冰蓄冷空调的CCHP型微电网优化调度模型采用改进粒子群算法进行求解,得到不同调度方式下系统的产能方案。通过算例分析对比了运行策略对于优化结果的影响,并验证了优化模型的有效性。     

汽车稳定杆组织与疲劳性能研究

对28Mn6钢制造的汽车稳定杆，分别采用整体感应加热-整体淬火、连续感应加热淬火两种不同工艺热处理，并进行了台架疲劳寿命试验。采用光镜分析了不同稳定杆的金相组织，用扫描电镜分析了早期疲劳断裂的稳定杆断口形貌。结果表明，获得细小的高韧性索氏体组织是保证良好疲劳寿命的关键，稳定杆喷丸表面质量、游离铁素体也是影响疲劳性能的重要因素。     

弧焊电源的焊接电流、负载持续率和发热试验

详细分析了弧焊电源不同负载持续率下的焊接电流折算关系、发热试验电源热时间常数的测定。对发热试验中容易被忽视、但会造成较大的系统误差的问题提出了注意点和相应的解决办法。