一种货运列车编组调度模型及算法研究

根据货运列车编组调度的基本要求,建立了配流模型。利用编组场待编组车节信息,结合到达场列车的实时信息,设计了信息反馈模型。根据配流模型和反馈模型,对列车进行解体和组编,考虑了军需物资和灾需物资的车辆信息,通过调整模型参数,使得模型继续适用那些由于铁路中断,需要绕行的货运列车。改变了传统算法只考虑局部车组信息,而忽视全局车组信息的弊端。因此,该模型具有灵活性。研究了基本的编组调度算法,使用贪心算法和动态规划算法相结合来求解,并分析了该算法的可行性。     

Recent development and applications of an optical method for measurements of thermophysical properties

The experimental determination of thermophysical properties has been greatly improved by the introduction of laser technology. The laser beam is used for sensing and also for heating (or exciting) the specimen. The advantage of using a laser beam is most strongly felt in the measurement of the thermal conductivity or the thermal diffusivity, which are some of the most difficult properties to measure. Interesting features of new techniques for investigating various aspects of thermal conductivity in fluids and solids are reviewed. An optical method, the so-called forced Rayleigh scattering method, or the laser-induced optical-grating method, has been developed and used extensively by the present author's group. The method is a high-speed remote-sensing method which can also quantitatively detect anisotropy, namely, direction dependence of heat conduction in the material. It was used for determination of the thermal diffusivity and its anisotropic behavior for high-temperature materials such as molten salts, liquid crystals, extended polymer samples, and flowing polymer melts under shear. Interesting applications of the method were demonstrated also for thermal diffusivity mapping and microscale measurement.Invited paper presented at the Twelfth symposium on Thermophysical Properties, June 19–24, 1994, Boulder, Colorado, U.S.A.     

Simulation analysis and experimental verification of coal suction characteristics of the new railway tunnel fallen coal dust collection device北大核心CSCD

Due to air turbulence, large areas of coal will fall when the special coal-transportation trains pass the tunnel exits and entrances. Aiming at the problems of low efficiency and high cost of manual cleaning for long distance coal cleaning in the tunnel, a new railway tunnel fallen coal dust collection device which was composed of a main conveying coal feeding pipe and multiple branch pipes of coal suction was designed. It was used to clean the small particles and lightweight railway tunnel fallen coal. Firstly, the gas-solid two-phase flow model based on the Euler-Lagrange approach for the design of the main conveying coal feeding pipe was established in the coal conveying pipelines. Secondly, the effect of the coal particles' incident angle and multiple branch pipe spacing on the main coal conveying pipe flow field, which was based on Fluent finite element simulation software, was studied. What was more, the optimal angle of incidence and the optimal value of the number of branch coal suction pipe, which was installed on the main conveying pipe, were analyzed. Finally, the finite element simulation was verified by field test. Simulation and experimental results showed that it was more conducive to the railway tunnel fallen coal transportation when coal particles' incident angle was less than 45° and the branch pipe spacing was in the vicinity of 750 mm. For that when incident angle was less than 45°, the main conveying coal pipe pressure-drop became weaker and particle flow could obtain large horizontal transport velocity. And when the branch pipe spacing was in the vicinity of 750 mm, the horizontal transport velocity had a smaller fluctuation range and the transportation of coal was larger than that of the other groups. The research results are of great significance to improve the structure of the main conveying coal pipe, increase the efficiency of tunnel coal conveying and optimize the railway tunnel coal dust collection device.     

Direct numerical simulations for assessment of gas-solid drag models in two-dimensional random arrays of particles

The momentum exchange between the phases plays a vital role in modelling of gas–solid flows and it is mathematically described by drag models. However, no consensus exists on which drag model gives the most accurate prediction of the drag force, and, despite the increase in available computing power, the same drag models are used in two-dimensional and three-dimensional simulations. In this study, direct numerical simulations of gas flow through multiple random configurations of static monodisperse particles are performed. The variations of solid volume fraction and particle Reynolds number are in the ranges of 0.05–0.4 and 13.7–136.9, respectively. The drag force exerted on particles is calculated and properly averaged. Based on the simulation results, thirteen drag models are compared and correction factors are introduced using the stochastic gradient descent algorithm. The correction factors provide a simple adjustment for the models to be used in 2D modelling.     

Hull-form optimization in calm and rough water

The paper presents a formal methodology for the hull form optimization in calm and rough water using wash waves and selected dynamic responses, respectively. Parametric hull form modeling is used to generate the variant hull forms with some of the form parameters modified, which are evaluated in the optimization scheme based on evolutionary strategies. Rankine-source panel method and strip theories are used for the hydrodynamic evaluation. The methodology is implemented in the optimization of a double-chine, planing hull form. Furthermore, a dual-stage optimization strategy is applied on a modern fast displacement ferry. The effect of the selected optimization parameters is presented and discussed.     

通用中小型机械企业网站的需求分析

为了克服中小型机械企业建立网站的经费不足、功能不全和缺乏安全性等问题,提出了建立通用企业网站的方案。首先通过广泛调研企业的需求,总结和分析了企业信息、客户管理、产品管理、销售与市场管理、物资供应管理、人事管理和安全管理等模块的功能;其次,分析了主要的业务流程和业务重组。     

The effect of visualizing the flow of multimedia content among and inside devices

This study introduces a user interface, referred to as the flow interface, which provides a graphical representation of the movement of content among and inside audio/video devices. The proposed interface provides a different frame of reference with content-oriented visualization of the generation, manipulation, storage, and display of content as well as input and output. The flow interface was applied to a VCR/DVD recorder combo, one of the most complicated consumer products. A between-group experiment was performed to determine whether the flow interface helps users to perform various tasks and to examine the learning effect of the flow interface, particularly in regard to hooking up and recording tasks. The results showed that participants with access to the flow interface performed better in terms of success rate and elapsed time. In addition, the participants indicated that they could easily understand the flow interface. The potential of the flow interface for application to other audio video devices, and design issues requiring further consideration, are discussed.     

基于GIS和神经网络的泥石流危险性评价系统

基于ArcEngine组件和．Net集成开发天山公路泥石流危险性评价系统,将GIS技术和神经网络集成应用于泥石流危险性评价中,发挥GIS强大的空间信息可视化管理和分析功能以及神经网络的非线性描述和分析功能,实现泥石流危险性评价的可视化管理,为工程决策者和管理人员提供一种强有力的决策支持方案。     

基于先验信息的运动物体分割与跟踪

提出一种基于先验信息的运动物体分割与跟踪算法。该算法假设帧间运动物体颜色直方图和大小等信息是相对不变的,利用动态规划思想最小化当前帧目标物体颜色直方图和大小与已知目标物体颜色直方图和大小信息的差距,从而找到较准确的目标物体轮廓。与梯度向量流算法相比,该算法对初始轮廓的鲁棒性较好,能在复杂的背景中找到物体轮廓。     

基于可疑行为识别的PE病毒检测方法

针对当前PE病毒难以防范及查杀的现象,对PE病毒关键技术进行分析,提取病毒典型特征的可疑行为,在此基础上提出一种Windows平台下的静态检测方法。该方法在对程序反编译处理的基础上,以指令序列与控制流图的分析为行为识别依据,完成基于可疑行为识别的病毒检测方法的设计。实验结果证明,该检测方法能有效检测混淆变换病毒。