正则化广义逆ERT 图像重建算法的研究

提出一种正则化广义逆ERT图像重建算法，利用ERT仿真软件得到的数据进行图像重建。与常用的ERT图像重建算法进行比较，重建出的图像经过统一的门限滤波后，反投影算法、灵敏度系数算法和正则化广义逆ERT图像重建算法重建图像的CSIE平均值分别为12％，9％和6％。研究表明，正则化广义逆ERT图像重建算法重建速度快，能显著提高重建图像的质量，适合于工业过程应用。     

Structurally noise resistant classifier for multi-modal person verification

In this letter we propose a piece-wise linear (PL) classifier for use as the decision stage in a two-modal verification system, comprised of a face and a speech expert. The classifier utilizes a fixed decision boundary that has been specifically designed to account for the effects of noisy audio conditions. Experimental results on the VidTIMIT database show that in clean conditions, the proposed classifier is outperformed by a traditional weighted summation decision stage (using both fixed and adaptive weights). Using white Gaussian noise to corrupt the audio data resulted in the PL classifier obtaining better performance than the fixed approach and similar performance to the adaptive approach. Using a more realistic noise type, namely “operations room” noise from the NOISEX-92 corpus, resulted in the PL classifier obtaining better performance than both the fixed and adaptive approaches. The better results in this case stem from the PL classifier not making a direct assumption about the type of noise that causes the mismatch between training and testing conditions (unlike the adaptive approach). Moreover, the PL classifier has the advantage of having a fixed (non-adaptive, thus simpler) structure.     

The AC losses measurement and analysis of superconducting NbTi CICC for HT-TU superconducting Tokamak

Superconducting TF and PF coils have been measured in SULTAN test facility. Segregated copper strands are included in four NbTi CICC and this is a technical innovation. Two AC losses measurement methods, calorimetric and electromagnetic methods, have been used in the experiments, and a broad frequency range (from 0.05 Hz to 6 Hz) is covered in sample test. The purpose of this experiment was to investigate AC losses of TF and PF CICC conductor including segregated copper and to check the design of PF and TF CICC coated with different resistive barriers (Pb-30Sn-2Sb and Ni plating on NbTi strands).     

真空状态下变压器铁心对地绝缘电阻的变化规律

通过测试变压器铁心对地的绝缘电阻及其模型的绝缘电阻，分析了绝缘电阻随真空度变化而变化的机理。总结出了绝线电阻随真空度变化的规律。     

μΩ级小电阻测量方法研究

对μΩ级小电阻测量的三种方法进行详细的讨论，并对小电阻测量中用到的4个关键技术进行了说明，给出了测量框图。     

交流电压灭磁的现场试验与应用

本文对葛洲坝二江电厂励磁系统灭磁原理及其存在的问题进行了分析，介绍了几种解决问题的方案，并对其进行了比较，详细介绍了交流电压灭磁实现方法和应用情况。     

电阻器设计研究探讨

阐述了电阻器设计的基本原则，提出根据给定的电阻允差，求出电阻的偏差值，再根据偏差值及材料尺寸偏差，得出材料的加工偏差的方法；此外，电阻器的热耗散可根据本文提供的值进行计算，然后对比一些成熟的产品再作修正，通过多次反复，取得经验，就可以设计出合乎要求的电阻器。     

感应电机无速度传感器矢量控制系统的定子电阻在线辨识

该文针对利用磁通观测器推算转子磁通的感应电机无速度传感器矢量控制系统，提出了定子电阻在线辨识法。在利用q轴磁通推算转速的基础上，该系统利用d轴磁通误差实现定子电阻在线辨识，该方案的优点是系统简单，解决了低速运行时电压模型的定子电阻变化对系统稳定性和速度控制精度的影响问题。数字仿真和实验结果验证了定子电阻在线辨识的必要性和该方案的有效性。     

密封铅蓄电池荷电态预测技术

阀控密封铅蓄电池的某些特性参数跟电池荷电态的关系有可能用于预测电池的荷电态;采用两个参数联合起来判别电池荷电态比单个参数更有效。开路电压/电池内阻法、电化学极化内阻/双层电容法、开路电压/短时间放电电压法,已为人们所采用,单独测取开路电压或内阻都无法预测密封铅蓄电池的荷电态。     

超声波电机测试技术的研究

通过对自行研制的 30mm环形行波型超声波电机进行的测试 ,第一次对超声波电机的主要测试技术和实现手段进行了详细的阐述 ,包括自由定子阻抗、定子振动模态、超声波电机输出特性的测试和实现方法。所采用的测试技术及实现方法不仅性价比优越 ,且适用于其他类型的超声波电机的检测 ,为超声波电机控制策略、闭环控制、以及产品实用化的开发和研究提供了理论依据和实验验证手段