拟动力实验中的数值积分方法

拟动力实验方法是目前最新的抗震实验方法，它克服了振动台实验中承载力不足、拟静力实验中无法真实模拟地震过程的缺点．本文详细论述了拟动力实验中的数值积分方法，其中包括：显式方法，隐式方法以及采用于结构技术时所需的特殊教值积分方法，并对这些方法的适用范围作了介绍．     

耐火纤维喷涂技术的优越性及应用

详细介绍了耐火纤维喷涂技术及施工等各方面的优越性。同时说明耐火纤维喷涂技术,在大庆石化公司炼油厂润滑油白土装置扩建改造中加热炉炉衬上的应用及取得的明显节能效果。     

对市毛纺二厂中南楼倒塌的分析研究

本市第二毛纺厂中南楼是一幢三层四跨的纯框架结构，它在1976年7月28日的唐山地震中，结构遭受了严重的破坏．后经过加固，在同年的11月15日的宁河地震作用下，房屋全部倒塌，笔者利用平面杆系模型，对其结构进行弹塑性分析，以期得到影响该房屋倒塌的因素。     

Synthesis of diamond crystals and films using an oxygen-acetylene flame under atmosheric pressure

Diamond growth with rates up to 100 to 140 μm/hr was achieved using an oxygen-acetylene combustion spraying technique in an atmospheric environment. Investigations on the processing indicated that the gas flow ratio, substrate position, substrate temperature, temperature distribution, and substrate pretreatment were the most important factors affecting the growth of diamond crystals. Evaluation by means of X-ray diffraction, Raman spectroscopy, scanning electron microscopy, and electron probe microanalysis showed that the synthesized diamond was nearly perfect in morphology, structure, and purity.     

进口与国产高强度耐磨钢板的组织及力学性能

观察了进口、国产高强度耐磨钢板的组织，测试了它们的力学性能及耐磨性能。结果表明，国产准贝氏体钢耐磨板具有良好的强韧性配合，耐磨性能超过进口耐磨钢板，能够替代进口板作为高强度耐磨板。     

Simulation of the Forming Behaviour of a Boron Modified P91 Ferritic Steel

The forming behaviour at high temperature of a modified 9%Cr‐1%Mo (P91) ferritic steel containing B and Ti for elevated temperature service was investigated. The microstructure of the as‐received material is mainly martensite at room temperature, but special etching revealed prior austenite grains of about 25 μm in size. Torsion tests were conducted at temperatures in the range 850 to 1250 °C to simulate the hot rolling process under comparable conditions of temperature, strain rate and strain. The deformation data obtained from these tests were correlated with the Garofalo equation with a stress exponent of 4.6 and an activation energy of 315 kJ/mol. This equation was used to predict the formability behaviour for the rolling process and also to determine the maximum forming efficiency and stability of the steel. A temperature of 1200 °C is recommended to conduct the forming process.     

石墨电极高温抗氧化技术研究现状

概述石墨电极抗氧化技术的研究现状，重点介绍选择抗氧化涂层体系的要求及涂层制备方法，包括包埋浸渗法、化学气相沉积法、等离子喷涂法及溶胶--凝胶法．展望了石墨电极材料高温抗氧化涂层研究的方向．     

浅海导管架平台地震响应分析

探讨了对浅海固定平台导管架结构的地震响应的要求及其分析方法。     

多层砖砌体房屋震害分析及抗震措施

介绍了我国砖砌体房屋历年来遭受震害的程度以及砖砌体的抗震性能，针对一些震害现象，分别从建筑布置和抗震措施加强对砖砌体的抗震性能进行论述。     

As Hangs the Flexible Line: Equilibrium of Masonry Arches

In 1675, English scientist Robert Hooke discovered “the true... ...manner of arches for building,” which he summarized with a single phrase: “As hangs the flexible line, so but inverted will stand the rigid arch.” In the centuries that followed, Hooke’s simple idea has been used to understand and design numerous important works. Recent research at MIT on the interactive analysis of structural forces provides new graphical tools for the understanding of arch behavior, which are useful for relating the forces and geometry of masonry structures. The key mathematical principle is the use of graphical analysis to determine possible equilibrium states.