波形刃铣刀片铣削温度试验分析

进行了铣削温度试验 ,采用改进的人工热电偶法 ,利用动态数据采集系统 ,对波形刃铣刀片的铣削温度进行了采集。利用C语言和MATLAB软件对试验数据进行了分析 ,拟合出温度—时间 (T t)曲线 ,初步得到了受热密度函数 ,为温度场的可视化打下有力的基础     

压缩弯曲小半径中频弯管工艺的研究

在分析了感应加热小半径弯管形变机理的基础上，提出了压缩弯曲的成型工艺，研制出了小半径中频弯管设备，并进行了大量的工艺实验和实验研究，取得了满意的结果。     

8~#煤矿许用型毫秒电雷管瓦斯安全性分析

对影响8~#煤矿许用型毫秒电雷管瓦斯安全性的因素进行了实验分析,提出相应的解决办法。     

新型光电混合式电流互感器设计

设计了一种光电混合式电流互感器,它由传感头、光纤传输和光电转换器、信号处理电路和工作电源4部分组成。这种结构具有绝缘性能高、可靠性强、质量小等特点,并对误差情况进行了分析。     

DCS在采暖锅炉房中的应用

介绍了Jx—300X DCS系统的组成、功能、特点以及热水锅炉主要控制方案及其在锅炉测控方面的应用。     

Internal drift effects on the diffusion of Ag in CdTe

Anomalous diffusion profiles of Ag in single crystalline CdTe were observed using the radiotracer ¹¹¹Ag. The diffusion anneals were performed at 800 K under Cd or Te vapor and in vacuum with low Ag concentrations. The measured Ag profiles directly reflect the distribution of the self-interstitials and vacancies of the Cd sublattice and are the result of chemical self-diffusion which describes the variation of the deviation from stoichiometry of the binary crystal as a function of depth and time. It turned out that the spread of the Ag dopant essentially is determined by the drift of the charged defects within the electric field caused by the distribution of the extrinsic and intrinsic defects.     

列车客车用低温发热电缆地面辐射供暖系统的实验研究

对不同地板结构和不同导线间距下发热电缆地面辐射供暖系统的热工性能进行了测试分析，考察了系统的稳定性和可靠性，给出了综合比较结果，分析了影响发热电缆地面辐射供暖系统热工性能的主要因素及其影响规律。     

浅谈城市集中供热工程造价的控制

就城市集中供热工程造价的控制问题，从对设计阶段的成本、施工过程，加强材料成本、工程结算的控制几方面对其进行了详细的阐述，最后对工料分析与检查方面进行了论述，以提高供热企业的投资效益。     

Adhesive Dispensing Process Analysis: Steady-State Dispensing of One-Component Adhesives

The process of dispensing one-component heat-cure adhesives was investigated in order to understand current application processes and to guide new process development. Typical one-component adhesives exhibit non-Newtonian rheological behavior, and hence Newtonian fluid mechanics does not adequately describe the dispensing process. In the present study, the adhesives were modeled as Bingham fluids possessing a yield stress and a steady state viscosity. The model of the dispensing apparatus includes four major flow sections connected in a serial configuration. The fluid mechanics equations derived for Bingham fluids in the individual flow sections were solved by numerical methods in order to understand the interrelationships between the material variables (e.g. yield stress, viscosity, temperature dependencies) and process variables (e.g. pressure, flow geometry, temperature, output). The concept of the model is generic and the details of the model can be modified for any forced-flow adhesive application process.

The adhesive flow properties significantly influence the process output. Dispensing temperature, among the process variables, has the strongest effect on process output. A ± 1.0·C perturbation in the dispensing temperature can cause as much as a 14% variation in the bead size for the range of adhesives studied. Differences in flow characteristics result in differences in processability and non-linear temperature/pressure sensitivity. The non-linear sensitivity can be eliminated by operating the dispensing process isothermally. Finally, the process limits for one-component adhesives, which are susceptible to chemical instability induced by viscous heating during processing, are defined and discussed in terms of a modified Brinkman number that takes into account viscous dissipation, heat conduction and convection, and chemical stability of the material during processing.     

An Electron Spin Resonance Study of Evolution of Organic Free Radicals in Irradiated Pepper During Heat Treatment

ABSTRACT: The thermal evolution behavior of the organic free radicals induced in irradiated black pepper was studied by electron spin resonance spectroscopy. To analyze the time-dependent evolution process, we used the theory of transient phenomena, that is, an ordinal differential equation, as well as the nonlinear least squares numerical method. We found that the radical evolution that occurred in the irradiated pepper obeys a single exponential function and yields a unique time constant. The evolution of the organic free radical undergoes a simple reaction process of a single radical species.