混合能量存储技术在光电微能源中的应用研究

为简化集成无线传感器节点光电微能源系统的设计和提高能量转换、存储效率,提出混合能量存储技术在光电微能源系统设计中的应用.混合能量存储器由电容器和锂离子电池组成.其能量存储原理负载特性被分析.另外,开展实验研究,结果表明,与直接能量存储方式相比,利用混合能量存储技术能量存储量提高27%.并且,微能源的负载特性也得到改善,实验结果与理论结果一致.     

机会网络中基于能量消耗的缓存管理策略

为了减少机会网络中节点的能量消耗,均衡各节点之间能量使用情况,延长网络寿命,提出基于能耗的缓存管理策略。在节点缓存空间有限的情况下,所提出的算法根据周围邻居节点能量的使用情况,动态调整节点用于缓存转发消息空间的大小,从而减少节点在存储-转发过程中的能量消耗。同时,为了避免传统休眠机制的能耗路由算法中由于目的节点休眠而导致消息投递失败的情况,引入了新的Inactive节点状态。实验仿真表明,与定时休眠机制的能耗算法比较,采用基于能量消耗的缓存管理策略能够使得机会网络中所有节点的整体能耗降低50%左右,并且节点之间能耗的标准差降低80%以上。     

基于模糊控制的低能耗分簇协议

能耗是影响无线传感器网络生命周期的关键,具有低能耗的无线传感器网络是业界所期望的。现有的几个网络分簇协议能在一定程度上解决和改善网络能耗问题。如LEACH协议能在一定程度上延长网络生命周期,但网络环境的可变性以及实际环境中有诸多不可估计的因素,LEACH协议就没考虑当前节点剩余能量和节点分布情况等问题。提出的基于模糊控制的低能耗分簇协议LECP-FC能较好地解决环境可变等不可估计的问题,在簇头选取的过程中着重考虑了能量、节点度、节点中心度、距离、侦听密度等因子。经过网络结构配置和仿真,其结果表明网络工作效率得到很大程度上的提高。     

Modelling demand response in organized wholesale energy markets

We propose a bi-level optimization model for demand response in organized wholesale energy markets. In this model, the lower level performs the economic dispatch of energy and generates the price and the upper level minimizes the total amount of demand response subject to a net benefit requirement. In an economic sense, demand response is a trade of ‘consuming rights’ instead of a sale of energy. Therefore it must be traded separately from the energy market. Although a bi-level optimization model is very hard to solve in general, we demonstrate that realistic power networks have characteristics that can be exploited to reduce the effective size of the problem instance. In particular, we transform the nonconvex net benefit test constraint to an equivalent linear form, and reformulate the nonconvex complementarity conditions of doubly bounded variables using SOS2 constraints. For realistic instances of the MPEC, we employ a three-phase approach that exploits the fast local solution from a nonlinear programming solver as well as LP-based bound strengthening within a mixed integer/SOS2 formulation. The model is tested against various data cases and settings, and generates useful insight for demand response dispatch operations in practice.     

Agro-ecosystem modeling can aid in the optimization of biomass feedstock supply

Recent European Directives promoted the development of biofuels, requesting mandatory limits to their emissions ot greenhouse gases (GHG). Second-generation biofuels based on lignocellulosic biomass are prime candidates but their GHG emissions are variable and uncertain. Agro-ecosystem modeling can capture them and the performance of biofuel feedstocks.This study aimed at optimizing feedstock supply for a bioethanol unit in France, from agricultural residues, annual and perennial crops. Their productivity and environmental impacts were modelled on a regional scale using geo-referenced data on soil properties, crop management, land-use and future weather data. Several supply scenarios were tested. Cereal straw was the most efficient feedstock but had a low availability, and only miscanthus could meet the bioethanol plant's demand. Sorghum combined poor yields and high GHG emissions compared by miscanthus and triticale. A mix of three biomass sources used less than 3% of the regional agricultural land while abating GHG emissions by 60%.     

A detection problem: Sensitivity and uncertainty analysis of a land surface temperature approach to detecting dynamics of water use by groundwater-dependent vegetation

Sustainable management of groundwater-dependent vegetation (GDV) requires the accurate identification of GDVs, characterisation of their water use dynamics and an understanding of associated errors. This paper presents sensitivity and uncertainty analyses of one GDV mapping method which uses temperature differences between time-series of modelled and observed land surface temperature (LST) to detect groundwater use by vegetation in a subtropical woodland. Uncertainty in modelled LST was quantified using the Jacobian method with error variances obtained from literature. Groundwater use was inferred where modelled and observed LST were significantly different using a Student's t-test. Modelled LST was most sensitive to low-range wind speeds (<1.5 m s⁻¹), low-range vegetation height (<=0.5 m), and low-range leaf area index (<=0.5 m² m⁻²), limiting the detectability of groundwater use by vegetation under such conditions. The model-data approach was well-suited to detection of GDV because model-data errors were lowest for climatic conditions conducive to groundwater use.     

Tracking Performance Bound with Finite Control Energy and Erasure Channel Energy Constraint

This paper studies the tracking performance of the single‐input single‐output (SISO), finite dimensional, linear and time‐invariant (LTI) system under the channel input energy constraint over the Erasure channel. A new performance index is proposed which is minimized over all two‐degree‐of‐freedom stabilizing controllers. The explicit expressions of the lower bound of the performance index and the minimum of the signal‐to‐noise ratio are obtained. The results show that the performance bound is correlated to unstable poles, non‐minimum phase zeros and the packet loss probability. Finally, examples are given to validate the conclusions derived.     

微型之字形压电式能量收集器输出电压的建模和仿真

为了有效解决无线传感器网络节点的供电难题,提出之字形结构的微型压电式能量收集器。相比于传统的直悬臂梁,此结构等效加大了压电梁的长度,降低了系统的固有振动频率。建立了之字形压电梁的本构方程和受迫振动方程,推导得到其输出电压的频域表达式。基于之字形压电梁的结构,利用ANSYS软件对其进行了谐响应分析。仿真结果表明,压电梁的输出电压在各阶固有振动频率处存在极值,符合理论分析的结果;输出电压大小随压电梁长度增加而降低,随压电梁宽度增加而升高,但均为非线性关系;压电梁末端质量块的长度和厚度、基体层厚度减小时,会导致输出电压的增大。在论文中所提出的结构尺寸下,10根直梁构成的之字形结构压电梁,在其一阶固有振动频率处,输出电压可达10 V以上,符合无线传感器网络节点的实际供电需求,证明了之字形压电梁结构的有效性。     

基于停车诱导系统的能量均衡可靠路由协议的设计

无线传感器网络中节点的能量是有限的,如何设计一个能有效节能的路由协议是其研究的热点之一.针对实际的停车位诱导系统提出了一种能量均衡的可靠路由协议.该协议在网络的初始阶段先建立全局网络拓扑,然后根据能量代价函数选择下一跳转发的节点,节点上方有障碍物的时候更新节点的可靠度信息.由于综合考虑了节点的剩余能量、跳数、邻居节点的距离以及可靠度等因素,使得网络节点能量的消耗得以均衡,达到延长网络生命周期的目的.在仿真平台对能量均衡的可靠路由协议进行了仿真分析,并且和最短路径路由进行了对比,从网络生命周期、网络能量均值以及网络能量方差三个方面分别分析,验证了本协议的优越性.最后将协议应用到实际的停车位诱导系统中,取得了较显著的效果.