铜冶炼系统节能降耗与余热利用前景分析

大规模铜冶炼系统的技术改造,可在短期内改变铜厂的面貌,快速提升产品产量,大幅降低铜冶炼的能耗,如何能更深层次地利用好余热资源,是我们研究和发展的方向。     

大庆油田南一区掺低温水集输流程

老油田开发进入高含水开采期，油井产液量、含水率大幅度增加，油井出油温度不断升高，由于降粘剂、防蜡剂的采用，防腐保温技术的进步，集输温度普遍提高。为了降低原油集输过程中的能耗，结合大庆油田南一区原油物性，地理条件和生产现状，开展了掺低温水原油集输工艺试验，取得显著的节能效果。着重介绍该区原油掺水保温流程概况，掺水温度的优选，掺低温水工艺取得的试验成果和效益。     

Turnover rates for heptane reforming over Pt/L zeolites with different alkali cations

A series of 0.6 wt% Pt/BaL catalysts with different alkali cations have been tested for heptane reforming at 440 ° C, 0.16 atm heptane, 0.95 atm H₂, 6.7 atm He, 3 to 5 h of reaction, and conversions between 2 and 10%. As the cations in the zeolite are progressively changed from lithium to cesium, the turnover rates for hydrogenolysis and dehydrocyclization increase by about 5–10 times, while the turnover rate for isomerization remains unchanged. Since the turnover rates for hydrogenolysis and dehydrocyclization are similarly affected, exchanging lighter alkali cations for heavier ones increases the aromatics selectivity by a small amount, from 72 to 82%. These results indicate that metal-support interactions have a moderate effect on the heptane reforming activity, but only a weak effect on the selectivity.     

耐高温辐射涂料在加热炉上的应用

分析了耐高温辐射涂料(HT—1)在加热炉应用的节能机理,工业实验取得良好效果。     

自来水节能阀的设计

系统地论述了自来水节能阀的控制原理和特点 ,提出了设计框架并进行了理论分析和推导计算     

低压组合床重整工艺工业试验

介绍了国产500kt／a低压组合床催化重整装置首次在中国石化股份有限公司长岭分公司的工业试验情况。近两年的运转及标定结果表明试验是成功的，该技术达到了国外连续重整技术第一代与第二代之间的水平，并且投资小，适于小型固定床重整装置的改造。     

节能型电磁装置电控系统设计

介绍节能型电磁装置,采用PLC,设计其电控系统。     

多孔纤维型重整微反应器的等效电阻网络建模

针对应用于重整制氢微反应器的复杂多孔金属纤维载体（PFS）的流速场高效分析难题,建立载体中随机微通道的等效电阻网络分析模型. 基于复杂随机纤维结构的统计网络模型,将纤维载体中三维联通的随机微通道结构及与之相连的进出口腔简化为规则的网络通道结构.借鉴基尔霍夫定律,建立纤维载体的等效电阻网络模型,并确定求解方法. 纤维载体流速场实例分析的结果表明,基于等效电阻网络模型求解的纤维载体流速场与计算流体力学(CFD)方法的结果之间的皮尔森相关系数约为98%,且求解效率约为CFD方法的2.9×10⁴倍. 研究成果为多孔纤维型重整制氢微反应器的设计制造提供了新的支撑方案.     

Stable NiO–CeO2 nanoparticles with improved carbon resistance for methane dry reforming

High surface area mixed oxide 8.7% NiO-CeO₂ nanoparticles (122 m²/g; 6–7 nm) were prepared using a reversed microemulsion method, and were tested for dry methane reforming (DRM). The catalytic activity of these nanoparticles remains stable under the severe conditions of DRM (700 °C), and they show better carbon resistance than conventional NiO-CeO₂ catalysts prepared without control of the size. The activity and selectivity of nanoparticles and reference catalyst are similar, but nanoparticles reduce the accumulation of carbon by 63% during the DRM tests, which is a key feature for this reaction. XPS and H₂-TPR suggest that the improved carbon resistance of the nanoparticles is due to the better interaction and cooperation between NiO and CeO₂ mixed phases. In nanoparticles, the participation of cerium cations in the redox processes taking place during DRM stabilizes cationic species of nickel. On the contrary, the catalyst prepared without control of the size suffers segregation of Ni during DRM reaction, and segregated Ni explains the higher catalytic formation of carbon.     

汽车焊接节能分析

本文着重分析了汽车常用焊接工艺(CO_2气保焊,电阻点焊,焊接机器人)的实际焊接节能效益。并指出采用具有先进技术指标的焊接工艺和设备是实现汽车焊接节能的主要途径。