步进梁式炉的运动研究

对国内引进的、用于粉末冶金的步进梁式炉的运动,以图解法和解析法进行了分析,并对运动参数进行了理论推导和计算。本研究结果,对解决步进粱式炉的运动故障以及进行新型设计提供了有效的理论分析和计算依据。     

基于偏振光干涉仪的Interleaver解复用器实验研究

为实现更窄信道间隔的密集波分复用 ,提出了一种基于偏振光干涉仪的新型Interleaver解复用器 ,分析了结构组成与基本工作原理 ,对其进行了初步的测试实验 ,该器件所分开的DWDM系统两组波长功率均衡 ,隔离度分别为 1 0 6dB和 1 4 6 4dB ,- 1dB带宽分别为 0 7nm和 0 4nm。     

钢筋混凝土框架梁截面的优化确定

以梁的配筋和截面有效高度为优化设计变量 ,导出了 RC框架梁的优化配筋率和优化设计高度 ,并给出了各种荷载作用下 ,不同设防烈度和场地类别条件下的截面优化设计高度表达式 ,为设计人员提供了方便 .     

Cover Picture: Programmable Motion and Separation of Single Magnetic Particles on Patterned Magnetic Surfaces (Adv. Mater. 14/2005)

Structured magnetic surfaces enabling programmable motion of single micrometer‐sized magnetic particles are reported on p. 1730 by Gunnarsson and co‐workers. Patterns of thin‐film magnetic elements are tailored to form transport lines with junctions for the separation of individual particles. This method has the potential to improve and generate new applications in biotechnology. The cover shows a schematic of the transportation and separation of magnetic particles functionalized with antibodies capable of selectively capturing the corresponding analytes from a sample.     

T梁预制中需要注意的问题

为确保在T梁预制时 ,其内、外的质量和安全施工 ,介绍了四个需特别注意的问题。指出在T梁预制时 ,应把质量放在首位 ,进行具体、综合的分析和计算     

P–I diagram method for combined failure modes of rigid-plastic beams

Closed-form solutions of pressure-impulse (P–I) diagrams for simply supported and fully clamped rigid-plastic beams subjected to impact load are developed. Two failure categories, i.e., bending failure and shear failure, are considered and the responses of the beams are analyzed based on five transverse velocity profiles. With proper failure criteria, the critical P–I equations for bending and shear failure are derived. After the simplification of the critical P–I equations, the influences of the shear-to-bending strength ratio and the boundary conditions on the P–I diagrams are discussed. The results are compared with those based on a single-degree-of-freedom (SDOF) model. It is shown that the proposed P–I diagram method can be conveniently applied to assess beam damage extents and damage patterns. Especially, the P–I diagrams have good agreement with those based on an elastic, perfectly plastic model when severe damage occurs.     

带吊车门式刚架轻型钢结构厂房的设计与分析

以实际工程为背景，采用门式刚架轻型房屋钢结构设计规程，对带吊车门式刚架、吊车梁、抗风柱及基础的受力特点、设计方法进行分析，解决了设计中所遇到的问题。     

Research on the Distant Hybrids of Wheat Obtained via Low-Energy Ion-Beam Implantation

Abstract The whole DNA of soybean was implanted into four varieties of wheat of Zhongyu5, Huaiyin 9628, Wenyou 1, Jimai 5 respectively via ion-beam mediation. There were 5 plantsobtained whose protein content was higher than 18.5%, the highest one was 21.44%. There were 3plants obtained whose protein content was lower than 11.5%, the lowest one was 10.96%. We cansee that the whole DNA of soybean transformed into wheat via ion beam implantation can inducethe increase in wheat protein content dramatically. The result also shows that the transformationefficiency of different gene types of wheat receptor varies greatly that the implanting time has acertain effect on the efficiency of transformation.     

连续箱梁桥中跨合龙段劲性骨架优化设计

结合某连续箱梁桥悬臂施工实践,对中跨合龙段劲性骨架设置和受力进行了分析,推导了劲性骨架设计的理论计算公式,并分析了劲性骨架刚度大小对桥梁整体结构的影响。     

二维轴对称折迭－组合腔CO2激光器失调时的输出光束的近场分析

给出平凹谐振腔和凹平凹谐振腔失调时光轴确定方法。在二维轴对称折迭－组合腔 激光器小角度失调运行时，对非相干并和和相干并和后的输出光束的近场强度分布做了分析和模拟。结果表明：小角度失调对4cm以内的近场影响不大，光强分布仍具有高斯状分布；对4cm以外的近场影响较大，光强分布发生相应的形变，且随着失调角度变大而变大。