Release rates of tetradecen-1-ol acetates from polymeric formulations in relation to temperature and air velocity

An apparatus was developed for investigating the release rates of pheromone formulations at temperatures and air velocities that correspond with those in the field. Polyurethane foam proved an excellent adsorbent for the recovery of tetradecen-1-ol acetates, allowing high air flows at low differential pressure and without breakthrough of these compounds. The experimental setup and procedures are described. The release rates of all formulations investigated were almost proportional to the square root of air velocity, and their logarithms were proportional to the reciprocal of temperature (K). When temperature is increased from 15°C to 25°C, the release rates increase by about 2-2.5 ×. Both relationships were combined into one equation that allows a reliable estimate to be made of the actual release rates of a formulation, under varying conditions, on the basis of its specific parameters and the relevant meteorological data.     

甲醇装置高效分醇技术及双"零"节能工艺

针对甲醇分离系统存在的普遍性问题 ,提出了“少醇无水”工艺技术并进行了工业实际应用。在“少醇无水”工艺的基础上 ,又提出双“零”工艺的构思。分别对该两种工艺进行了经济效益分析。结果表明 :“少醇无水”工艺可使入塔醇含量由0 .987%降至 0 .5 62 % ,装置能力提高 6.0 %～ 11.12 % ;双“零”工艺可使 10万t/a甲醇装置生产能力提高 2 2 .0 0 %。     

A vapor collection and thermal desorption method to measure semiochemical release rates from controlled release formulations

Chemicals (bp 270–490 °C/1 atm) evaporated from a controlled-release formulation dispenser were carried by an airflow to a collector packed with a polymeric adsorbent. After a set time, the chemicals were recovered by thermally desorbing them onto a gas-liquid chromatograpic column. They were then separated and quantified. The apparatus is described, and the requirements for its successful use are discussed. The soundness of the thermal desorption technique was confirmed by comparison with another technique: solvent elution from the collector. The advantages of the former technique are discussed.Mention of a commercial or proprietary product in this paper does not constitute an endorsement of that product by the USDA.     

北京市雨水收集利用蓄水池容积计算与分析

基于北京市1984—2013年的日降雨资料,以北京林业大学林业楼及其周边绿地为研究区,设置3种用水情景(冲厕、绿地灌溉及冲厕+绿地灌溉),采用连续模拟法,分别绘制3种用水情景下雨水收集利用工程的雨水截留率、自来水替代率、供水保证率以及效益费用比变化曲线,并通过综合分析这些曲线的变化特征确定雨水蓄水池最佳设计容积(60~82 m3)。同时采用设计暴雨法计算1~5年不同重现期的蓄水池设计容积(77~248 m3)。结果表明,连续模拟法计算过程相对复杂,但可用于综合衡量雨水收集利用工程的雨洪管理效益,以及缓解水资源短缺效益、供水可靠性及经济可行性分析。     

Garbage collection of multi-version indexed data on flash memory

Maintaining a multi-version index on flash memory could generate a lot of updates and invalid pages. It is important to have an efficient garbage collection mechanism to ensure the flash memory has sufficient number of free blocks for storing new data versions and their index structures. In this paper, we study the important performance issues in using the purging-range query to reclaim the blocks, which are storing old data versions and invalid index entries, to be free blocks. To reduce the cost for processing the purging-range query, we propose the physical block labeling (PBL) scheme to provide a better estimation on the purging version number to be used for purging old data versions. To further enhance the performance of the garbage collection process, and at the same time to maximize the deadspans of data versions and balance the wear levels of the blocks, we propose two schemes called, the sequential placement (SQ) and frequency-based placement (FBP), for placing new data versions into free pages. As illustrated in the performance studies, both SQ and FBP can effectively balance the wear levels of the blocks. The deadspans of data versions are longer under FBP than both SQ and RR, and the page reallocation cost is also lower under FBP especially when the size of flash memory allocated for the database is limited. The experimental results also illustrate that PBL can effectively minimize the number of invocations of the purging-range query to be one to reclaim the required number of blocks in each garbage collection.     

农村智能电表推广应用研究

随着我国经济社会的快速发展,建设坚强智能电网的步伐也越来越快。智能电表作为智能电网的最末端,已开始在农村推广应用。通过分析目前农村智能电表推广应用中存在的问题,提出了在农村智能电表全面推广中应解决的问题和应对措施。     

电能量采集及计费自动化系统的应用分析

当前的人工抄表和计算已很难适应电能统计和结算的要求,致使能够满足电网商业化运营的电量计费系统应运而生。介绍了电能量采集及计费自动化系统的用途、数据流和功能。     

动态贝叶斯最小二乘支持向量机

为了对涡扇发动机的运行参数变化进行实时高精度预测,提出一种基于动态贝叶斯最小二乘支持向量机(LS-SVM)的时间序列预测算法。该算法将贝叶斯证据框架理论用于推断LS-SVM的初始模型参数;然后,利用样本增减迭代学习算法实现LS-SVM的参数动态调整。对某型涡扇发动机的摩擦力矩时间序列进行动态预测,并与动态LS-SVM模型的预测结果进行比较。结果显示,动态贝叶斯LS-SVM具有较好的预测精度。     

闭世界框架下灰色模糊多属性决策方法

针对D-S 证据理论在融合高度冲突的证据时可能导致与直观结果相悖的问题, 已有的基于修改数据模型的方法更多地考虑如何提高冲突证据结果的聚焦程度, 而没有考虑冲突成因以及如何通过冲突原因判断来削减证据之间的冲突. 对此, 提出一种闭世界框架下的灰色模糊多属性决策方法. 根据一般的灰色关联分析方法的基本思路, 将灰色关联度与欧氏距离有机结合, 构造出一种平均相似度对方案进行评价, 进而得到方案的排序结果. 最后, 通过实例分析验证了所提出方法的可行性和有效性.     

BackTrack5在网络渗透取证技术中的应用

本文对目前针对Linux平台下的BackTrack5进行阐述,内容涵盖敏感信息收集,漏洞信息收集,漏洞工具测试,账户特权升级等,笔者对在虚拟机环境下运行,下载BackTrack5,加载运行BackTrack5后需要进行网络配置加以说明,同时针对各种工具的常用命令及基本应用,实践后对其优缺点加以说明。